vehicle heat management testing equipment

Brand Name:Kinte

Model Number:Customized

Place of Origin:China

... coaxial heat exchanger/reheater performance test, heater core performance test, PTC heating performance test, HVAC temperature distribution and temperature linearity test Applicable refrigerant: R290, R134a, R234yf, CO2, etc Applicable standards: GB, ISO,

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

...Vehicle Drive Over Test Equipment With P225/75R1 Tire Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management...

Brand Name:Sinuo

Model Number:SNQC1001

Place of Origin:China

Vehicle Rain Leakage Testing Equipment Car Rainproof Sealing Test Chamber Complied Standards & Clauses Conforms to IEC 60529 Degrees of protection provided by enclosures (IP Code); Product Overview This automotive rain test chamber simulates natural outdoor rain conditions to set up spray testing conditions. All surfaces of a motor vehicle...

Brand Name:AI

Model Number:CHT-T

Place of Origin:CHINA

...Heat Transmission Test Equipment Introduction: This contact heat transmission test Equipment is designed according to ISO12127-2007 and EN702. The tester uses the heating cylinder to provide a constant temperature in contact with the sample undercertainload and a calorimeter to measure the heat transfer properties. This contact heat transmission test equipment...

Brand Name:ZL

Model Number:ZL-9028

Place of Origin:China

...Heat Sealing Testing Equipment Of Food Packing​ Summary: Packaging Heat Seal Strength Tester seals the specimen under specified temperature, pressure and dwell time, to test the heat seal strength of laminated films. MRE(Meal Ready to Eat) Packaging Heat Seal Strength Tester conforms to standards of ASTM F2029. ZL-9028 Packaging Heat Seal Strength Tester.doc MRE(Meal Ready to Eat) Packaging Heat...

Brand Name:DAXIAN

Model Number:DX8401

Place of Origin:China

...Heat Flux Testing Equipment for Floor Covering Materials Conform to the standard: meet the requirements of GB/T11785-2005 and ISO9239-1 "Determination of Combustion Performance of Paving Materials - Radiant Heat Source Method". Scope of application: It is suitable for testing...

Brand Name:YUYANG

Model Number:YY431

Place of Origin:China

...Heat Transmission Testing Equipment Product description: Heat transmission Tester for fire protection clothing is designed according to ISO12127-2007 and EN702 design and development and manufacturing; The instrument use the heating cylinder to provide a constant temperature in contact with the sample under certain load and a calorimeter to measure the heat...

Brand Name:HongCe

Model Number:HH0812

Place of Origin:China

... is use to perform thermal aging test to polymer materials (plastics, plastics and electrical insulating materials such as: wire and cable sheathing, heat shrinkable tube, rubber test or PVC materials, and the insulating components, or use for drying,

Brand Name:SKYLINE

Model Number:SL-FL56

Place of Origin:China

... of protective materials, which meets the test standards of ISO 6942 and EN 366. The instrument consists of two testing methods. Method A is used to visually evaluate the appearance changes of the material after thermal radiation. Method B measures the

Brand Name:LAB TECH

Model Number:HTI

Place of Origin:China

...Heat Transmission Testing Equipment ISO9151 Standard Introduction: A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. HTI calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing...

Brand Name:kingpo

Model Number:KP-CG96

Place of Origin:china

...Vehicles Plugs Endurance with Load Tester Product information: The test equipment is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial plugs, socket-outlets and couplers can withstand the mechanical, electrical and thermal stresses that occurred during normal operation without excessive wear or other harmful effects. The servo motor drives the mechanism to make the test...

Brand Name:DGBELL

Model Number:BTKS-150 / BTKS-225 / BTKS-408 / BTKS-800 / BTKS-1000

Place of Origin:China

...resistant sealing strip is used as the seal between the door and the test chamber body to ensure the accuracy of the test. The door of the test chamber adopts a non-reactional door handle. The outer test chamber material is made of an A3 steel plate, which

Brand Name:HAIDA

Model Number:HD-216

Place of Origin:Guangdong, China (Mainland)

...battery management systems (BMS) for electric vehicles and energy storage power stations. It also generates comprehensive test reports. Product Function Test 1. Static Current Consumption Test 2. Current Precision Verification 3. Balanced Current Test 4.

Brand Name:HOOHA

Model Number:ZY6264 10MW

Place of Origin:China

... and components) and extensive fire resistance test verification for raw materials, buildings and physical models. Experimental principle: The most basic physical quantity of a large calorimeter is the heat release rate. When a fire, to measure don't

Brand Name:HeJin

Model Number:HJAP05

Place of Origin:China

...Test Equipment ISO12405-1 3 Axis Vibration Test For Vehicles Battery Packs Standard: ISO12405-1 Electrically propelled road vehicles — Test specification for lithium-ion traction battery packs and systems — Part 1: High-power applications Applications: This part of ISO 12405 specifies test procedures for lithium-ion battery packs and systems for use in electrically propelled road vehicles. Auto Parts Test Equipment The specified test

Brand Name:GAOXIN

Model Number:GX-5068-A

Place of Origin:Guangdong, China

...Vehicles EV Battery Nail Penetration Testing Equipment 1. Product Name:GX-5068-A Power battery penetrating testing machine 2. Description: The testing machine is used for the battery penetrating test by simulating the acupuncture by sharp objects when pack, transport, reserve, use and dispose batteries. The result of the test can be used to evaluate the safety performance of the battery. Test method: For single battery: Use the heat

Brand Name:Zhongcai

Model Number:ZC-QCG90A

Place of Origin:Guangdong,China

...Vehicle Battery Pack Testing & Training Platform is designed based on automotive components, focusing on the teaching and practical training needs of new energy vehicle (NEV) power management systems. Its core functions include power management component testing...

Brand Name:Haida

Model Number:HD-H216

Place of Origin:China

...battery management systems (BMS) for electric vehicles and energy storage power stations. It also generates comprehensive test reports. Product Function Test 1. Static Current Consumption Test 2. Current Precision Verification 3. Balanced Current Test 4.

Brand Name:PEGO GROUP

Model Number:IP56X

Place of Origin:China

...62196-1 PLC Electric Vehicle IP5X and IP6X Sand Dust Testing Equipment 1. Introduction: The sand dust testing equipment is applied to test the physical and other related properties of electronic and electrical products, electric vehicle, lamps, electrical ...

Brand Name:SHC

Model Number:SC-CT38

Place of Origin:China

.... It is used to test the pressure-resistant properties of the electrical accessories and mounting box under the circumstance of being heated. This testing equipment should be put into use with the heating box. This device comprises two steel jaws, having a