5vdc 2 axis positioning module

Brand Name:GE

Model Number:IC693APU302

Place of Origin:USA

...-Axis Positioning Module , 90-30 Series Product Description The IC693APU302 is an intelligent, motion mate, 2-axis positioning module (APM) manufactured by GE Fanuc belonging to the 90-30 series. It is a fully programmable module and consists of a 2-axis ...

Brand Name:GE

Model Number:IC693APU302

Place of Origin:USA

... mode, the module delivers high performance “electronic gearing,” which comes in handy for slave-master applications. The user can select a preferred mode in the configuration software. The axis positioning module can be accommodated by any CPU or

Brand Name:GE

Model Number:IC693APU301

Place of Origin:USA

...a simple to use, fully programmable, intelligent motion control module. Created specifically for the Series 90-30 PLC, this axis positioning module lets the PLC user mix high performance control with PLC logic solving functions in a single combined system.

Brand Name:Mitsubishi

Model Number:QD70P8

Place of Origin:Japan

... Description: Multi axis positioning module, 8 axes Height (mm): 98 Width (mm): 27.4 Depth (mm): 90 Weight (kg): 0.17 Information about this range Three different positioning modules for control of up to 4 axes Open-collector output type (QD75P series)

Brand Name:GE

Model Number:IC693APU302

Place of Origin:USA

...AXIS POSITIONING MODULE Technical Application The PACSystems* RX3i Universal Backplanes provide a dual-bus backplane that supports PCI-based (IC695) and serial (IC693 and IC694) I/O and option modules. The RX3i Universal Backplanes also support Series 90-30 IO and option modules. See the PACSystems RX3i System Manual, GFK-2314 for lists of supported modules...

Brand Name:GE

Model Number:IC693APU301

Place of Origin:USA

... 3.5x13x13.5cm Weight 0.32kg Product Details IC693APU301 is a Single Axis Positioning Module (APM) for the GE Series 90-30. The Motion Mate APM is a simple to use, fully programmable, intelligent motion control module. Created specifically for the

Brand Name:Mitsubishi

Model Number:QD75D4

Place of Origin:Japan

...Positioning Module Open collector output system: Differential driver output system No. of control axes: 4 axes Interpolation function: 2-, 3-, or 4-axis linear interpolation Control system:PTP (Point to Point) control, path control (both linear and arc can be set), speed control, speed-position switching control, position...

Brand Name:OMRON

Model Number:CS1W-NC413

Place of Origin:Japan

OMRON CS1W-NC413 PULSE OC OUT MODUL 4 AXIS POSITION CONTROL UNIT NEW Specifications of CS1W-NC413 Description CS1W-NC413 is a NC Unit produced by Omron Type NC Unit Brand Omron Axis 4 Origin Of Country Japan Condition New Warranty 1 Year Descriptions of ...

Brand Name:MITSUBISHI

Model Number:QD75D4N

Place of Origin:China/Japan

Specification Series MELSEC-Q SERIES Type DIFFERENTIAL DRIVE OUTPUT Number of Axes 4 Int. Current Consumption (A) 0,66 Width (mm) 27,4 Height (mm) 98 Depth (mm) 90 Weight (kg) 0,16 FAQ 1. who are we? We are based in Hunan, China, start from 2025,sell to ...

Brand Name:GE

Model Number:IS215WEPAH1AB

Place of Origin:USA

*, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, svg {display: block; max-width: 100%; } input, button, textarea, ...

Brand Name:ZANE

Model Number:ZHH210

Place of Origin:China

...Module 15 M Stroke Length For CNC Linear Position 1.Description The linear module is a mechanical structure that provides linear motion. The linear module can be used horizontally or vertically. The linear module can also be combined into a specific motion mechanism--that is, multi-axis motion commonly referred to as XY axis, XYZ axis, etc. in the automation industry. 2.ZHH210 Motor power 750W Repeated positioning...

Brand Name:Mitsubishi

Model Number:QJ71C24N

Place of Origin:Japan

...axis, differential driver output type. 2-axis/3-axis/4-axis linear interpolation. 2-axis arc interpolation. Control units: mm, inches, degrees, pulses. Number of positioning data: 600 data/axis. Large pulse output: 1MppsQJ71C24N-R4 basic knowledge. 40 pin connector. Positioning module. Open collector output type. Differential driver output type. It can also meet high-speed and control needs. The QJ71C24N-R4 analog module...

Brand Name:SXEGL

Model Number:PTH

Place of Origin:China

...Module With Micron Level Positioning The linear stage module is a modular linear motion unit integrating linear guide rails, drive systems , and high-precision positioning components. Driven by motors, it achieves precise linear reciprocating motion of the slider on the guide rail, supporting independent single-axis use or multi-axis combination (XY/XYZ multi-axis platforms). It provides high-rigidity, high-positioning

Place of Origin:China

Brand Name:CEI-Kinte

Model Number:Customized

...AXIS FLEXIBLE POSITIONING UNIT PRODUCT INTRODUCTION NC Locator, the Three-Axis Flexible Positioning Unit The three-axis flexible positioning unit is mainly used in the body in white welding workshop. It can realize the rapid and flexible positioning of the body in white, improve the cycles and the flexibility of welding equipment, and reduce the development cost of new models. Pic1 Product Module...

Brand Name:SXEGL

Model Number:PTH

Place of Origin:China

...Module With Micron Level Positioning The linear stage module is a modular linear motion unit integrating linear guide rails, drive systems , and high-precision positioning components. Driven by motors, it achieves precise linear reciprocating motion of the slider on the guide rail, supporting independent single-axis use or multi-axis combination (XY/XYZ multi-axis platforms). It provides high-rigidity, high-positioning

Categories:Barcode Recognition Engine

Country/Region:china

5VDC IP54 Hard Decoding Barcode Recognition Engine *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {line-height: 1.5;-webkit-font-smoothing: antialiased;}img, picture, video, canvas, svg {display: block;max-...

Brand Name:Purple Horn

Model Number:ML-GL1680

Place of Origin:China, Shenzhen

... mode Continuous / modulated Working stroke X axis: 300mm, Y axis: 200mm, Z axis: 100mm (customizable) positioning accuracy X/y/z axis ≤ 0.05nm Flow velocity X/y/z axis: 100mm/s Welding line width 0.5-3.0mm software function Multi axis linkage laser ...

Brand Name:SI

Model Number:SIF-70

FG-70/70C is a fully solid-state, digital closed-loop, tactical-grade single-axis fiber optic gyroscope. Based on the SAGNAC principle, it consists of an SLD light source, fiber coupler, photodetector, integrated optical phase modulator, fiber sensing coil...

Brand Name:Siemens

Model Number:A06B-6240-H206

Place of Origin:China

...tools and industrial automation systems. This module delivers stable power output, fast response, and reliable performance to support accurate axis positioning and dynamic machining. It is fully compatible with mainstream FANUC CNC systems, widely used for

Brand Name:SUPT-MOTION

Model Number:MLCA-0040-135-00

Place of Origin:China,Suzhou

product description: The linear motor module utilizes SUPT linear motors equipped with high-precision optical encoders, magnetic encoders, and high-precision guide rails, providing customers with an ideal linear motion solution. Featuring a compact, ...