Lifting safety regulations

7. Lifting safety regulations
1. The operator must undergo professional safety technical training, pass the examination, and hold the certificate.
2. Warning signs should be set up at the hoisting site, and special personnel should be set up to monitor.
3. Do not work in the open air when there is heavy snow, fog, heavy rain and strong wind above 6.
4. Before operation, the operation unit should check the lifting machinery, rigging, lifting gear, safety devices, etc., to ensure that they are in good condition.
5. Lifting should be carried out according to the specified load, and the lifting gear and rigging should be selected and used after calculation, and should not be overloaded.
6. Pipes, pipe racks, poles, mechanical and electrical equipment, etc. should not be used as hoisting anchor points.
7. Test lifting should be carried out before lifting, check all the mechanical tools and ground anchors before the test lifting, rectify the problem immediately, and confirm that the normal can be formally lifted.
8. Command personnel should wear clear signs and conduct command according to contact signals. Lifting machinery operators, cable personnel should comply with the relevant provisions.

2025 China (East China) International Surface Treatment Industry Expo

The 8th (Yangtze River Delta) International Electroplating, Painting and Intelligent Environmental Protection Exhibition 2025

At the same time, the 2025 Summit on the development of new environmental protection materials, new technologies and new processes will be held

Time: May 8-10, 2025 Venue: Nantong International Convention and Exhibition Center

2025 China (East China) International Surface Treatment Industry Expo will be held in Nantong International Convention and Exhibition Center from May 8 to 10, 2025, the exhibition is expected to exhibit an area of 10,000 square meters, more than 300 exhibitors, and the number of visitors is expected to reach 15,000. With the theme of "Promoting the upgrading and development of the surface treatment industry, intelligent manufacturing creates the future", the exhibition focuses on the upgrading and innovation of intelligent manufacturing, focusing on the latest processes and solutions in the surface treatment industry, and promoting the product innovation and upgrading of the surface treatment industry. During the same period, a number of technical seminars and activities will be held, inviting domestic and foreign experts and representatives to interact, discuss the development trend of the industry, and share their own experience. At that time, warmly welcome domestic and foreign new material enterprises and their related industries to visit and exchange!