Lightweight IC695ETM001 GE Ethernet Interface Module For RX3i PACSystems

1. Product Overview

2. Key Features & Benefits

• Dual-port switch – copper ports support daisy-chain, ring or redundant star topologies
• Deterministic update – < 1 ms EGD exchange time for 2 KB data with 16 consumers
• Cyber-secure – password-protected firmware upload, SSL/TLS 1.3 for OPC-UA, disabled-by-default web server
• Hot-swap ready – insert/remove under power when rack power budget ≤ 70 %
• Auto-crossover – straight or crossover CAT5e/CAT6 cables work automatically
• Wide temperature – 0…+60 °C operating, –40…+85 °C storage, 5 g vibration, 50 g shock
• Global certs – CE, UL 508, CUL, ATEX (Cat 3, Zone 2), RoHS & REACH

3. Technical Specifications

4. Supported Services

• SRTP – upload/download logic, monitor variables, perform Run/Stop commands
• Modbus TCP – up to 16 concurrent server connections, 2 client channels
• Ethernet Global Data – 16 producers / 32 consumers, 2 KB per exchange
• OPC-UA – 10 concurrent sessions, 5 kHz sampling rate, built-in certificate manager
• Web server – static home page (can be disabled); firmware update via HTTPS

5. Quick Start Steps

1. Slot module in any RX3i I/O slot; torque captive screws 0.4 N·m.
2. Wire ports – use CAT5e or higher, max 100 m; ports auto-MDIX.
3. Assign IP – Proficy Machine Edition > Hardware Configuration > ETM001 > Static or DHCP.
4. Configure protocols – enable SRTP, Modbus, EGD or OPC-UA as required.
5. Apply & download – store configuration in CPU flash; cycle power optional.
6. Verify LEDs – green “LAN” steady, amber “ACT” blinks with traffic.

6. What’s in the Box?

• 1 × IC695ETM001 Ethernet module, factory-sealed
• 1 × quick-start guide (English)
• 2 × RJ-45 dust caps (keep unused ports clean)