Multi Function XRF Fusion Machine High Frequency XRF Sample
Preparation
- Equipment name: multi-function high-frequency melting machine
- Model number: GH-4ZC
- Casting methods: pot bottom forming, manual casting forming and
automatic casting forming are three optional
- Equipment composition and characteristics
- The XRF high-frequency melting prototype is composed of four parts:
heating system, control system, mechanical system and water cooling
system
The heating system uses our company's homemade high-frequency power
supply to form a vortex on the platinum crucible, so that the
platinum crucible induction heating;
Control system using touch screen display and input data,
programmable controller (PLC) control, can store at least 10 kinds
of samples, the user only set according to the requirements of
sample melt: current and time (oxidation, heating, constant
temperature, rotation, forming) steps, then gently press start
(built-in screen key) to complete a sample preparation process. If
the X fluorometer performs the curve according to this procedure,
store the the is stored for call.
The mechanical system adopts automatic casting type, and the
mechanical system and control system are designed, that is, the
mixing mode of the crucible is "centrifugal variable speed rotation
plus positive reversal", this swing mixing design has been awarded
the national utility model patent, patent no. ZL201020155249.7.
The water cooling system is composed of water pump, water tank and
exhaust fan. The inlet temperature range of the cooling water
system is 5-45℃; the inlet pressure range is: 0.1M Pa- -0.3MPa.
Ensure the normal operation of the electrical components in the
equipment;
- Equipment characteristics
- Easy to use: no need to preheat preservation, 30 seconds can rise
from room temperature to more than 1000℃, especially suitable for
intermittent sample preparation.
- Rapid sample preparation: fast heating speed can achieve rapid
sample preparation, about 10 minutes can do a batch of samples, 24
hours of continuous work.
- One-click switching system (sample for XRF, AA, ICP)
- Safety and environmental protection: built-in exhaust fan to
eliminate exhaust gas, no large area of thermal radiation is
beneficial to the health of operators.
- Mold forming: reduce the crucible maintenance rate.
- Low follow-up cost: no valuable supplies, no need to regularly
replace the heating components, refractory materials.
- Good energy saving effect: only heating the crucible and the mold.
- Low amount of platinum gold: a small amount of crucible and mold
can achieve the same output of other heating equipment.
- Equipment protection: water shortage, over current, over pressure,
over temperature fault protection function.
- Large selection range: pot bottom molding, manual casting molding
and automatic casting molding of various functional equipment.
Table 1: Main parameters of equipment
| Unit type | JR-4ZC |
| Maximum output | 12kW (fused and molded power supply output power) |
| Range of oscillation frequencies | 50KHz-80KHz |
| Range of current regulation | 35A-130A |
| Time adjustment range | 0s-999s |
| Forming mode | Auto |
| Sample production per batch | 4 |
| Cooling water pressure | 0.1-0.3MPa |
| Program storage | More than 10 groups |
| Fusion temperature | 0-1300℃ (adjustable) |
| Temperature control accuracy | ±1℃ |
| Stirring method | Centrifugal rotation + positive reversal (exclusive patent) |
| Rotational speed range ★ | 0-180 rpm / min (adjustable) |
| Speed change period ★ | N. times / min (adjustable) |
| Infrared temperature measurement range | 400℃-1200℃ |
| Main dimensions (length, width and height) | 1160*660*1100mm |
| Host net weight | 390kg |
| Tank shape size | 990x690x1530mm |
| Water tank net weight | 130kg |