| Sign In | Join Free | My infospaceinc.com |
|
All Mechanical Parts & Fabrication Services wholesalers & Mechanical Parts & Fabrication Services manufacturers come from members. We doesn't provide Mechanical Parts & Fabrication Services products or service, please contact them directly and verify their companies info carefully.
| Total 11229 products from Mechanical Parts & Fabrication Services Manufactures & Suppliers |
|
|
|
Model Number:0312960703G Place of Origin:China Brand Name:Shunhongyu Product Description Need the scraper that clears the glue line on an SCM edgebander? This is the R1.5 carbide scraping insert for the scraping station, 20 x 12 x 2 mm, listed under SCM number 0312960703G. The same insert body is also ground as R1 ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:PMC302 Brand Name:Shunhongyu Place of Origin:China Product Description If your KDT edgebander takes a φ125 mm disc on a 30 mm bore at 40 mm height with 1 key groove, this 9T PCD pre-milling cutter is that size. It is supplied as a pair — 2 pcs, 4.95 kg — and it squares the panel edge before the banding ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:- Brand Name:Shunhongyu Place of Origin:China Product Description Need to cut a banding end square without walking the panel back to the machine? This 55 mm end cutter does it by hand. A cutting width of 0–55 mm covers every banding width the data lists, and a cutting thickness of 0.3–3.0 mm covers... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:32*16*180mm Brand Name:Shunhongyu Place of Origin:China Product Description Need the joint that carries drive on a KDT automatic edgebander without ordering the wrong size? This one is 32 × 16 × 180 mm, steel, painted black, listed against KDT edgebanders, with a 32 × 16 × 70 mm size for the same machines. A ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:EC001 Brand Name:Shunhongyu Place of Origin:China Product Description Need to change a worn rough trimming cutter on a KTD edge bander without waiting weeks for the machine maker? EC001 goes on the same trim station on three measured numbers: 56 mm outside diameter, 16 mm bore and 14 mm height, with 4 ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Brand Name:Shunhongyu Model Number:PMC004 Place of Origin:China Product Description Need a premilling cutter pair that goes straight back into an edgebander already on the floor? The PMC004 is a PCD pre-milling cutter supplied as 1 pair – 2 pcs: 80 mm outside diameter, 30 mm bore, 63 mm height, 3+3Z tooth layout, 2.84 ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:PMC203 Brand Name:Shunhongyu Place of Origin:China Product Description Need the panel edge squared before the band goes on? The PMC203 does that job at the pre-milling station. 100 mm outer diameter on a 30 mm bore, 50 mm height, 3.85 kg per pair, sold as 1 pair = 2 pcs. Alloy steel body, PCD diamond ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:PMC303 Brand Name:Shunhongyu Place of Origin:China Product Description Replacing a pre-milling head on a KDT edgebander? The PMC303 fits on three numbers: φ125 mm outer diameter, φ30 mm bore, H43 mm height, on a double keyway drive. Tips are PCD diamond, so the edge stays square over far more board than ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:φ60xφ16x146z Brand Name:Shunhongyu Place of Origin:China Product Description Need the proud edge tape taken down before the fine trim head touches it? A rough trimming cutter does that in one pass. This one is 60 mm outside diameter, 16 mm bore, 14 mm cutting height and 6 teeth (6Z), ordered as part 40214084. It... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:φ56Xφ20XH14-6Z Brand Name:Shunhongyu Place of Origin:China Product Description Need to take the overhang off a glued edge banding without sending the head out? The 56X20XH14-6Z PCD rough trimming cutter runs a 56 mm body on a 20 mm bore, 14 mm cutting height and 6 teeth — alloy body, polycrystalline diamond edges... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:L75*W58*H185mm Brand Name:Shunhongyu Place of Origin:China Product Description Need to take the glue line and the edge overhang off both faces of a panel at the machine instead of at the bench? This pneumatic flat scraping device is one set: an upper scraper and a lower scraper on the same body. It mounts on the ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:NANXING 60C Brand Name:Shunhongyu Place of Origin:China Product Description Need the part that keeps a NANXING edgebander glue pot running? This is the NANXING 60C glue shaft on its own, not a whole new pot, so a worn or scored shaft is replaced by itself. It is listed as an edgebander spare part under edge ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:67X20XH17X6Z-R3 Brand Name:Shunhongyu Place of Origin:China Product Description A dull fine trimming cutter shows up as a white line along the top and bottom edge of the panel, and the bander keeps running while it does. This is the replacement: 67 mm outside diameter, 20 mm keyed bore, 17 mm height, 6 teeth, R3 ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Brand Name:Shunhongyu Model Number:4014030041 4-014-03-0041 Place of Origin:China Product Description Will it fit? Only if four numbers match: 20 mm long, 12 mm wide, 2 mm thick, 4 mm inner hole. This is the carbide scraping insert that scrapes the glue line off a panel edge after the trimming cutters, and it is ground to a radius - R1... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Brand Name:Shunhongyu Product Description Replacing the scraper blades on a CEHISA edge bander? This is a 14.6 × 11.6 × 2 mm scraping knife with a 35° ground bevel, made in left and right hand so the scraping unit cleans the glue line on both sides of the panel. The product ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:- Brand Name:Shunhongyu Place of Origin:China Product Description Trimming PVC, ABS or melamine edge tape by hand usually means a flexible utility blade, a slip that gouges the panel face, and an edge that changes with whoever holds the knife. This trimmer scraper removes that variable. A 120 x 60 x ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:4010040010 / 4-010-04-0010 Brand Name:Shunhongyu Place of Origin:China Product Description Replacing a worn damper on a Homag machine comes down to three numbers, and 4010040010 matches them: hub 65/110 mm, overall length 183 mm, load rating 110 N. The unit absorbs shock and damps vibration at its mounting point, so the shock... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:3-602-13-0070 Brand Name:Shunhongyu Place of Origin:China Product Description Replacing a dull cutter blade on a Homag machine comes down to four numbers. This blade is 67 mm long, 15 mm wide, 4 mm thick, with 5 mm mounting holes, and it carries both part numbers 3-602-13-0070 and 3602130070. It is a flat cutting... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:25X12X52mm Brand Name:Shunhongyu Place of Origin:China Product Description Need the cardan joint for a Nanxing automatic edgebander? Play in a worn cardan joint shows up as feed that stutters, and stuttering feed bonds banding unevenly. This part is 25 x 12 x 52 mm: 25 mm outer diameter, 12 mm inner diameter, ... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |
|
|
Model Number:25X12X198mm / 25X12X238mm Brand Name:Shunhongyu Place of Origin:China Product Description Replacing a worn cardan joint on the Nanxing glue pot of an edge banding machine comes down to three numbers. This joint is 25 mm outside diameter, 12 mm bore and 198 mm long, with a 238 mm version for the same pot and a 52 mm version... |
Shunhongyu Woodworking Machinery Parts Store, Shunde District, Foshan City
Guangdong |