Hairbands

Brand Name:PEGO GROUP

Model Number:PG-TPA/B/C/D/1/2

Place of Origin:China

IEC60529 IP Code Probe for IP1X / IP2X / IP3X / IP4X 1. Introduction of IP Code Probes: IP code probe is a test probe to verify the degrees of protection specified in IEC60529.Test probe A for IP1X test is intended to verify the protection of persons aga...

Brand Name:PEGO Group

Model Number:PG-SDA

Place of Origin:China

ISO 6722-1 Figure 6 Sandpaper Abrasion Test Apparatus for Testing Cable of Car 1. Introduction The auto cable sandpaper abrasion test apparatus meets the requirements of ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE ...

Brand Name:PEGO Group

Model Number:PG-PD10A

Place of Origin:China

Test Eha: IK01 to IK10 Pendulum Hammer Impact Test Apparatus Swing Pipe Combines with Striking Elements 1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet...

Brand Name:PEGO Group

Model Number:PG-IPX34AS

Place of Origin:China

IEC60529 spray nozzle testing equipment for IPX3 and IPX4 Testing, spray nozzle with Control Box 1. Introduction IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify...

Brand Name:PEGO Group

Model Number:PG-ET02

Place of Origin:China

IEC60335-2-25 clause 18 Microwave Oven Door Endurance Tester 1. Introduction The microwave oven door endurance tester is designed to meet the test requirements of IEC60335-2-25:2020 clause 18, the door system of the microwave oven, including hinges, ...

Brand Name:PEGO Electronics

Model Number:PG-IPX69K

Place of Origin:China

PLC Control IEC60529 waterproof Comprehensive Test Chamber for IPX5, IPX6 and IPX9K Testing 1. Application Outdoor lightings, householding appliance, auto parts and other electronics device. 2. Function of the Comprehensive Test Chamber The main function...

Brand Name:PEGO Electronics

Model Number:PG-IPX16BS

Place of Origin:China

Chamber-Type IEC60529 waterproof IP Testing Equipment for IPX1/2, IPX3/4 and IPX5/6 Testing 1. Function of the Comprehensive Test Chamber The chamber equipment integated with drip box for IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 ...

Brand Name:PEGO Electronics

Model Number:PG-IPX34AS

Place of Origin:China

IEC60529 Hand-Held Spray Nozzle Test Device for IPX3 and IPX4 Testing 1. Application T he spray nozzle is used in the conditions that certain types of apparatus it is not possible to wet all parts of the enclosure under test with oscillating tubes (R200-...

Brand Name:PEGO Electronics

Model Number:PG-SDA

Place of Origin:China

Apparatus for Sandpaper Abrasion Test as Per ISO6722-1 for Testing Auto Cable 1. Standard conforms to ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE J1127, SAE J1128 and JIS C3406 standard. 2. Application The abrasion ...

Brand Name:PEGO Electronics

Model Number:PG-SCA

Place of Origin:China

ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet the test requirements of ISO6722-1 clause 5.12.4.2 and figure 7, DIN72551-5, QC/T-730, JASO D611-94 and ...

Brand Name:PEGO GROUP

Model Number:IP56X

Place of Origin:China

IEC 62196-1 PLC Electric Vehicle IP5X and IP6X Sand Dust Testing Equipment 1. Introduction: The sand dust testing equipment is applied to test the physical and other related properties of electronic and electrical products, electric vehicle, lamps, ...

Brand Name:Pego Tester

Model Number:PG-IK

Place of Origin:China

Product Description: One of the key features of our Impact Tester is its variable height of fall. Our Impact Tester offers four different energy levels: 5, 10, 20, and 50 Joules, with corresponding heights of fall of 300mm ±1%, 200mm ±1%, 400mm ±1%, and ...

Brand Name:Pego Tester

Model Number:PG-TA

Place of Origin:China

Product Description: Our Impact Test Device is designed with precision and accuracy in mind, featuring varying r/mm sizes of 6, -, 10, and 17 for a wide range of testing options. The device is also equipped with an input of 220V/50Hz, allowing for ...

Brand Name:Pego Tester

Model Number:PG-IK11

Place of Origin:China

Product Description: Equipped with striking elements of 2J*2, 5J*2, 10J*2, 20J*2, and 50J*2, this impact test equipment is suitable for IK07, IK08, IK09, IK10, and IK11 pendulum and vertical impact tests. The striking elements are made of steel material...

Brand Name:Pego Tester

Model Number:PG-TA

Place of Origin:China

Product Description: Our Impact Test Device boasts a drop mode that is controlled by a button and electromagnet for instantaneous release for vertical impact tests. For pendulum impact tests, it features a manual control for ease of use. The equivalent ...

Brand Name:Pego Electronics

Model Number:LSG-255

Place of Origin:China

1.2/50us Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output ...

Brand Name:Pego Electronics

Model Number:PG-TPB

Place of Origin:China

IEC61851-1 Standard Test Finger for Verifying the Accessibility to Live Parts of Vehicle Connector 1. Introduction The standard test finger is designed according to IEC62196-1 for verifying the accessibility to live parts of socket-outlets and vehicle ...

Brand Name:Pego Electronics

Model Number:PG-TPB

Place of Origin:China

IEC60335-1 Similar Test Probe B with 50mm Circular Stop Face 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-1 clause 20.2, the finger part is same as the test probe B of IEC61032, but having a circular stop face...

Brand Name:Pego Electronics

Model Number:PG-TPB-2

Place of Origin:China

IEC60335-2-14 Similar Test Probe B with 125mm Circular Stop Face for Verifying the Stability and Mechanical Hazards of the Kitchen Machines 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-2-14 clause 20.2, the ...

Brand Name:Pego Electronics

Model Number:PG-USH

Place of Origin:China

0.14J to 1J Universal Spring Hammer Test Apparatus 1. Introduction The universal spring hammer test apparatus is adjustable to peform IK01 (0.14J), IK02 (0.2J), IK03 (0.35J), IK04 (0.5J), IK05 (0.7J) and IK06 (1J) tests. It can meet the test requirements...