Fashion Accessories

Brand Name:PEGO

Model Number:PG-STP

Place of Origin:China

IEC60335-2-11 Surface Temperature Measuring Probe for Tumble Dryers 1. Introduction The probe for measuring surface temperature is designed according to the requirement of IEC60335-2-11 figure 101 and IEC6335-2-6. It’s mainly used to test the temperature ...

Brand Name:PEGO GROUP

Model Number:PG-TPB

Place of Origin:China

IEC60335-1 / IEC60529 / IEC61032 IP Code Probes Test Probe B Jointed Test Finger 1. Introduction of Test Probe B: Test probe B ( jointed test finger) is intended to verify the basic protection against access to hazardous parts. The jointed test finger is ...

Brand Name:PEGO GROUP

Model Number:PG-PA100A

Place of Origin:China

Articulate Probe with Web Stop / UL Articulated Finger Probe for Accessibility Test / Jointed Test Probe 1. Standard Conforms to: UL858 figure 6.1, IEC62368-1 figure V.1, UL507 figure 6.5 (PA100A), UL1017 figure 2, UL1062 figure 1.2, UL1310 figure 14.2, ...

Brand Name:Pego Tester

Model Number:PG-SH08

Place of Origin:China

IEC60068-2-75 IK08 Level Spring Impact Hammer for 5J Impact Testing 1. Introduction: The spring impact hammer is designed according to IEC60068-2-75 (GB/T2423), it is necessary equipment for electronic equipment to test the degrees of protection provided...

Brand Name:PEGO GROUP

Model Number:PG-WD

Place of Origin:China

Motor-Driven Inclined Plane Stability Tester 0 to 30 Degrees Titled for Household Appliance 1. Introduction Inclined plane stability tester is applied to test the stability and mechanical hazards of floor standing units in normal use, it is conforms to ...

Brand Name:PEGO GROUP

Model Number:PG-IPX34A

Place of Origin:China

IEC60529 Figure 5 Brass Spray Nozzle Hand-Held Device for IP Rating Testing 1. Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing...

Brand Name:PEGO GROUP

Model Number:IPX56A

Place of Origin:China

IEC60529 Figure 6 Jet Spray Nozzles Φ6.3mm and Φ12.5mm SUS304 Stainless Steel 1. Introduction Jet nozzles are strictly designed according to IEC60529 figure 6 to verify protection against water jet. Test nozzle with inner diameter Φ6.3mm is for IPX5 test...

Brand Name:PEGO GROUP

Model Number:IK-PD10

Place of Origin:China

1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Ehc and IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS ...

Brand Name:PEGO GROUP

Model Number:LSG-255

Place of Origin:China

10KV Impulse Withstand Voltage Generator 1.2μs/50μs Voltage Wave 1. Introduction The impulse withstand voltage generator is a voltage wave tester with a waveform of 1.2μs/50μs. The frontier time is 1.2μs and the half-peak time is 50μs. It conforms to the ...

Brand Name:PEGO GROUP

Model Number:PG-IK

Place of Origin:China

IK Level Pendulum Impact Testing Machine Equip with 2J / 5J /10J / 20J Steel Hammers 1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Ehc and IEC62262 (equivalent EN62262), and can meet the test ...

Brand Name:PEGO GROUP

Model Number:IPX56FS

Place of Origin:China

IEC60529 Strong Jet Water Simplified Test Device for IPX5 and IPX6 Testing 1. Introduction: IPX5/6 strong jet water simplified test device is designed according to IEC60529 clause 14.2.5 and 14.2.6. Waterproof test simulates the condition of water jets...

Brand Name:PEGO GROUP

Model Number:PG-PD10

Place of Origin:China

IEC60068-2-75 Test Eha: Adjustable IK07 to IK10 Pendulum Impact Test Apparatus 1. Introduction The pendulum impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet the test requirements of ...

Brand Name:PEGO GROUP

Place of Origin:China

IK07/ IK08 / IK09 / IK10 Manual Release Vertical Impact Hammers 1. Introduction The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on ...

Brand Name:PEGO GROUP

Model Number:PG-TPA/B/C/D/1/2

Place of Origin:China

IEC60529 IP Code Probe for IP1X / IP2X / IP3X / IP4X 1. Introduction of IP Code Probes: IP code probe is a test probe to verify the degrees of protection specified in IEC60529.Test probe A for IP1X test is intended to verify the protection of persons aga...

Brand Name:PEGO GROUP

Model Number:IP56X

Place of Origin:China

IEC60529 Anti-Dust Test Chamber for IP5X and IP6X Tests 1. Introduction: Dust chamber is for IP5X and IP6X testing as per IEC60529, the powder shall be able to pass through a square-meshed sieve the nominal wire diameter of which is 50μm and the nominal ...

Brand Name:PEGO Group

Model Number:PG-SDA

Place of Origin:China

ISO 6722-1 Figure 6 Sandpaper Abrasion Test Apparatus for Testing Cable of Car 1. Introduction The auto cable sandpaper abrasion test apparatus meets the requirements of ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE ...

Brand Name:PEGO Group

Model Number:PG-PD10A

Place of Origin:China

Test Eha: IK01 to IK10 Pendulum Hammer Impact Test Apparatus Swing Pipe Combines with Striking Elements 1. Introduction The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet...

Brand Name:PEGO GROUP

Model Number:PG-FC56-8000L

Place of Origin:China

8000L Step-In Dust Chamber as per IEC60068-2-68 method La2 Constant Air Pressure 1. Introduction The step-in dust chamber is designed according to IEC60529 for IP5X&IP6X tests and IEC60068-2-68 method La2 (constant air pressure), the object of this test...

Brand Name:PEGO Group

Model Number:PG-IPX34AS

Place of Origin:China

IEC60529 spray nozzle testing equipment for IPX3 and IPX4 Testing, spray nozzle with Control Box 1. Introduction IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify...

Brand Name:PEGO Group

Model Number:PG-ET02

Place of Origin:China

IEC60335-2-25 clause 18 Microwave Oven Door Endurance Tester 1. Introduction The microwave oven door endurance tester is designed to meet the test requirements of IEC60335-2-25:2020 clause 18, the door system of the microwave oven, including hinges, ...