Fashion Accessories

Brand Name:PEGO

Model Number:IK-SH01

Place of Origin:China

IEC62262 Single Operated 0.14J / IK01 Spring Hammer Impact Test Apparatus 1. Introduction This spring hammer can meet the requirement of IEC60068-2-75 and IEC62262, the impact energy is 0.14J and IK test level is IK01. It is consists of three principal par...

Brand Name:PEGO

Model Number:IK-SH04

Place of Origin:China

IEC62262 Single Operated 0.2J / IK02 Mechanical Impact Spring Hammer 1. Introduction This spring hammer can meet the requirement of IEC60068-2-75 and IEC62262, the impact energy is 0.2J and IK test level is IK02. It is consists of three principal par...

Brand Name:PEGO GROUP

Model Number:IP56X

Place of Origin:China

IEC60529 Anti-Dust Test Chamber for IP5X and IP6X Tests 1. Introduction: Dust chamber is for IP5X and IP6X testing as per IEC60529, the powder shall be able to pass through a square-meshed sieve the nominal wire diameter of which is 50μm and the nominal ...

Brand Name:PEGO GROUP

Model Number:IPX34AS

Place of Origin:China

IEC60529 IPX3 and IPX4 Spray Nozzle Test Equipment for Outdoor LED Luminaires 1. Introduction IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against...

Brand Name:PEGO GROUP

Model Number:IPX34AS

Place of Origin:China

IEC60529 IPX3 and IPX4 Brass Spray Nozzle Test Equipment (Built-in Water Tank) 1. Introduction IEC60529 IPX3 and IPX4 brass spray nozzle test equipment is consisted by brass spray nozzle and control box (built-in water tank), IPX3/4 spray nozzle test ...

Brand Name:Pego Tester

Model Number:PG-DS12

Place of Origin:China

IEC60065 and UL1310 Dielectric Strength Tester for Testing Insulating Material with Brass Electrodes or Stainless Steel Electrodes 1. Application: For testing insulating material 2. Standards compliant IEC60065, UL1310 3. Introduction The equipment is ...

Brand Name:PEGO Group

Model Number:PG-SDA

Place of Origin:China

ISO 6722-1 Figure 6 Sandpaper Abrasion Test Apparatus for Testing Cable of Car 1. Introduction The auto cable sandpaper abrasion test apparatus meets the requirements of ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE ...

Brand Name:PEGO GROUP

Model Number:PG-FC56-8000L

Place of Origin:China

8000L Step-In Dust Chamber as per IEC60068-2-68 method La2 Constant Air Pressure 1. Introduction The step-in dust chamber is designed according to IEC60529 for IP5X&IP6X tests and IEC60068-2-68 method La2 (constant air pressure), the object of this test...

Brand Name:PEGO Group

Model Number:PG-ET02

Place of Origin:China

IEC60335-2-25 clause 18 Microwave Oven Door Endurance Tester 1. Introduction The microwave oven door endurance tester is designed to meet the test requirements of IEC60335-2-25:2020 clause 18, the door system of the microwave oven, including hinges, ...

Brand Name:PEGO Electronics

Model Number:PG-TB31

Place of Origin:China

IEC60068-2-31 Repeated Free Fall 500mm /1000mm Rotating Barrel for Mechanical Strength Test 1. Introduction The rotating barrel also called as tumbling barrel is designed according to IEC60068-2-31clause 5.3/figure A.1, IEC60598-1 clause 4.13.5, IEC60884...

Brand Name:PEGO Electronics

Model Number:PG-TPB

Place of Origin:China

Similar Test Probe B with 50mm Circular Stop Face IEC60335-1 Clause 20.2 1. Introduction The probe is similar to test probe B of IEC61032 but having a circular stop face with a diameter of 50mm, instead of the non-circular face. The probe is designed to ...

Brand Name:PEGO Electronics

Model Number:PG-IPX34S

Place of Origin:China

IEC60529 Figure 5 Hand-Held Device (Spray Nozzle) to Verify Protection Against IPX3 Spraying and IPX4 Splashing Water 1. Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to verify the protection...

Brand Name:PEGO Electronics

Model Number:PG-SDA

Place of Origin:China

Apparatus for Sandpaper Abrasion Test as Per ISO6722-1 for Testing Auto Cable 1. Standard conforms to ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, SAE J1127, SAE J1128 and JIS C3406 standard. 2. Application The abrasion ...

Brand Name:PEGO Electronics

Model Number:PG-SCA

Place of Origin:China

ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet the test requirements of ISO6722-1 clause 5.12.4.2 and figure 7, DIN72551-5, QC/T-730, JASO D611-94 and ...

Brand Name:PEGO Electronics

Model Number:PG-TP636

Place of Origin:China

BS/EN50636-2-100 Arm Probes for Accessbility Test to Hazardous Move Parts of Garden Blower 1. Young Adult Arm Probe Introduction The young adult arm probe is designed according to BS/EN50636-2-100 figure 1 and IEC50636-2, it is simulate the young adult ...

Brand Name:PEGO

Model Number:PG-FT01

Place of Origin:China

IEC62196-1 Clause 26.4 EV Plug and Vehicle Connector Cable Bending Test Apparatus for Flexing Test 1. Introduction of cable bending test apparatus Cord bending test apparatus is designed according to IEC62196-1 clause 26.4 figure 20 and table 14, it is ...

Brand Name:Pego Electronics

Model Number:LSG-255

Place of Origin:China

1.2/50us Impulse Voltage Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output ...

Brand Name:Pego Electronics

Model Number:PG-TPB

Place of Origin:China

IEC60335-1 Similar Test Probe B with 50mm Circular Stop Face 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-1 clause 20.2, the finger part is same as the test probe B of IEC61032, but having a circular stop face...

Brand Name:Pego Electronics

Model Number:PG-TPB-2

Place of Origin:China

IEC60335-2-14 Similar Test Probe B with 125mm Circular Stop Face for Verifying the Stability and Mechanical Hazards of the Kitchen Machines 1. Introduction Similar test probe B is designed to meet the test requirements of IEC60335-2-14 clause 20.2, the ...

Brand Name:Pego Electronics

Model Number:PG-TP60601

Place of Origin:China

IEC60601-1 Test Probe Kits for Verification to Openings in Enclosures of ME equipment​ 1. Introduction The test probe kits are meet the requirement of IEC60601-1, includes standard test finger, test pin, straight unjointed test finger, test hook and metal ...