Place of Origin:China

Brand Name:HongCe

Model Number:NP-1

100 N Plug Socket Tester Device For Testing Non - Solid Pins Product overview: The appliance is checked by the test of clause 24 and, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted...

Model Number:SLT-3

Place of Origin:China

Brand Name:HongCe

Switch And Plug - Socket Life Testing Apparatus Product overview: This device complies with standard terms of 20, 21 in IEC884-1(figure 16) and IEC60669-1 as well as IEC61058-1. It is used for the on-off ability test and the normal operation lifespan test...

Place of Origin:China

Brand Name:HongCe

Model Number:ADL-1

Appearance Change Of Lanterns Light Testing Equipment Adjusting Devices IEC60598-1 R500mm Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, equipped with the appropriate...

Brand Name:HongCe

Model Number:EOB-2

Place of Origin:China

IEC 60432-1 Lamp Foot Twist Apparatus Light Testing Equipment Product information: This apparatus confirms to the standard of IEC 60432-1. For testing all kinds of lamps, energy-saving lamps of the torque test. Digital display, it is easy to use. ...

Brand Name:HongCe

Model Number:HL-1

Place of Origin:China

IEC 60598-1 Clause 8.15 Arrangement For Impact Test For Handlamps Product information: This test device is designed and manufactured according to the standard requirements of IEC 60598-1 clause 8.15.1 for handlamps having a handle or shell of flexible ...

Brand Name:HongCe

Model Number:EOB-2

Place of Origin:China

Intelligent Test Meter For Lamp Cap And Holders Light Testing Equipment With Digital Display Product information: Lamp cap twist apparatus EOB-2 built in intelligent microprocessor, is a new generation of intelligent products, with the following ...

Brand Name:HongCe

Model Number:HC-50

Place of Origin:China

5 N . M LCD Display Digital Torque Tester With High Resolution Function characteristic: LCD digital display, high resolution Maximum, minimum setting, overload alarm protection tips Peak hold, auto peak value and tracking mode Kgf.cm/Lbf.in/N.m three units...

Brand Name:HongCe

Place of Origin:China

Ground Recessed Luminaires Light Testing Equipment IEC 60598-2-13 ​ Production introduction: This test equipment conforms to IEC 60598-2-13 clause 13.6.1 and clause 13.6.2 standard requirements. It is used for the ground accessed luminaires static load ...

Place of Origin:China

Brand Name:HongCe

Model Number:MT-1

IEC60558-1 Fig6 Mandrel Tester Device Light Testing Equipment 100N / 150N Product information: This tester conforms to IEC60558-1 Fig6 and IEC60065 Fig14--16. The test shall be performed by fixing the specimens of thin sheets on a mandrel made of nickel ...

Place of Origin:China

Brand Name:HongCe

Model Number:SN-100

Push And Pull Force Gauge SN-100 SN-100 Series push and pull force gauge is a small simple push, pull testing equipment, with high precision, easy to operate and easy to carry advantages, but there is a peak switching operation knob, do load instructions...

Brand Name:HongCe

Model Number:TLC-1

Place of Origin:China

IEC60598-2-20 Lampholder Copper Contacts Security Thrust Test Device Product information: The test apparatus is used to check security of lampholder contacts, avoid the lamp holder contacts shifting and the live parts of the lamp string becoming accessible...

Place of Origin:China

Brand Name:HongCe

Constant Temperature Water Bath Product information: This device meets the test equipment requirements of GB5013 and UL1581 etc. And mating usage of other devices, it can be used to inspect the withstand voltage and insulation performance of electric wire...

Place of Origin:China

Brand Name:HongCe

Print Fastness Tester Product information: Products overview: this device meets UL1581, EN60730 standards, suitable for inspection of the print wear-resistance of wire sheath or electrical plastic (on the shell). Work power: 220 V/frequency 50 Hz Preset ...

Place of Origin:China

Brand Name:HongCe

Model Number:AP-1

Attaching Plug Tension Tester Product information: This device complies with UL817 standard which is applicable in the assessment of the connection intensity between the molded power plug and guide line, and the guide wire’s anti- sudden tensile strength. ...

Place of Origin:China

Brand Name:HongCe

Model Number:IPD-6

220V 50Hz Light Testing Equipment Lamp Tilt Test Bench 0-30 Degree GB7000 Product information: This device complies with GB7000 and other standards, the device consists of a work surface and angle adjustment device, is suitable for all types of portable ...

Place of Origin:China

Brand Name:HongCe

Model Number:ADL-1

Portable Lanterns / Light Testing Equipment High Performance Product information: The device is used to detect adjustment device, and confirm to the IEC60598-1 clause 4.14.3. The adjustment device, equipped with the appropriate cable or cord shall be ...

Place of Origin:China

Brand Name:HongCe

Model Number:WFP-1

60598 - 2 - 20 250mm IEC Test Equipment For Winding A Flexible Pipe Product information: Conform to standard: IEC60598-2-20:6.14 Figure 3, it is used to test the mechanical strength of the light string. Weight: 60N*1 Diameter of cylinder (mm): 250mm ...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-LHA1

Fluorescent Lamp Holder Axial Force Tester Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N ...

Place of Origin:China

Brand Name:HongCe

Model Number:TLC-1

Test Device Suitable For Checking Security of Lampholder Contacts Product information: The device is used to check security of lampholder contacts, and conform to the IEC60598-2-20 Fig 2. The incandescent lamp is removed and a force of 15 N is applied for ...

Place of Origin:China

Brand Name:HongCe

Model Number:WFP-1

Test Device Suitable For Winding A Flexible Pipe Product information: Conform to standard: IEC60598-2-20:6.14 Figure 3, it is used to test the mechanical strength of the light string. Weight: 60N*1 Diameter of cylinder (mm): 250mm Material: Wood About us...