Place of Origin:China

Model Number:MY-1200x600/CF-A1

Brand Name:MYREAL

Class A1 Non-combustible Ceramic Foam Insulation Board Fire safety is the first question engineers ask when specifying insulation for a curtain wall. This Class A1 non-combustible ceramic foam insulation board answers it directly: the board is fully ...

Model Number:MY-1200x600/CF-LC

Brand Name:MYREAL

Place of Origin:China

Low Thermal Conductivity Ceramic Foam Insulation Board Heating and cooling usually dominate a building's energy bill, and the fastest way to cut them is to slow heat flow through the wall. This low thermal conductivity ceramic foam insulation board ...

Place of Origin:China

Brand Name:MYREAL

This product is a Class A1 non-flammable inorganic insulation material which can meet the requirements of modern building materials for environmental protection, safety, insulation and high cost-effectiveness. This product is a non-glazed foamed ceramic ...

Place of Origin:China

Brand Name:MYREAL

Model Number:CS-P650

MYREAL calcium silicate pipe sections are pre-formed from inorganic siliceous and calcareous materials through a high temperature, high pressure hydrothermal reaction. The rigid section keeps a constant wall thickness on high temperature piping up to 650...

Model Number:CS-B270

Place of Origin:China

Brand Name:MYREAL

MYREAL dense calcium silicate board MY270 is the highest density grade in the range at up to 270 kg/m3, with compressive strength of 0.65 MPa and dimensional stability within 1%. It is used as back-up and hot face insulation in industrial furnaces whe...

Place of Origin:China

Brand Name:MYREAL

Model Number:CS-B220

MYREAL boiler insulation board uses the MY220 grade: up to 220 kg/m3, compressive strength of 0.65 MPa and conductivity of 0.087 W/(m.K) at 300 C. The board holds thickness on curved boiler shells and drums, resists burner and fan vibration, and keeps the ...

Model Number:CS-P650P

Brand Name:MYREAL

Place of Origin:China

MYREAL power plant pipe insulation uses calcium silicate sections specified for main steam, hot reheat and feedwater lines in generating plants. Because the material carries a super low chloride ion content, it is suited to stainless and alloy steel ...

Brand Name:MYREAL

Place of Origin:China

Model Number:CS-B240S

MYREAL rigid calcium silicate board uses the high strength MY240 grade, with compressive strength of 0.65 MPa and flexural strength of 0.33 MPa. It is used for pipe shoes, saddles and support blocks, where a rigid board keeps its shape without framing and ...

Brand Name:MYREAL

Model Number:CS-B240

Place of Origin:China

MYREAL industrial equipment calcium silicate board is the MY240 general purpose grade for vessels, heat exchangers, tanks and process equipment. It provides a rigid, cut-to-shape insulation layer that keeps a constant thickness over nozzles, manways and ...

Model Number:CS-RMS

Brand Name:MYREAL

Place of Origin:China

MYREAL removable insulation covers are made as a box or jacket shaped to the outline of the valve, flange or steam trap. A calcium silicate board insert sits inside a fabric or metal outer jacket and the cover closes with quick release lacing and straps...

Model Number:CS-P220

Place of Origin:China

Brand Name:MYREAL

MYREAL calcium silicate pipe sections are pre-formed from inorganic siliceous and calcareous materials through a high temperature, high pressure hydrothermal reaction. The MY170 and MY220 half-rounds stay within 1% dimensional change and 2% linear ...

Model Number:CS-S270

Place of Origin:China

Brand Name:MYREAL

MYREAL calcium silicate shaped blocks are machined from MY270 dense board, which carries 0.65 MPa compressive strength and 0.33 MPa flexural strength with dimensional stability within 1%. They are made to your drawing for furnace doors, burner openings, ...

Model Number:CS-C170

Brand Name:MYREAL

Place of Origin:China

MYREAL calcium silicate curved segments are cut from MY170 board to the radius of your vessel, tank or large header, so the insulation follows the shell without gaps or faceting. At 0.081 W/(m.K) at 300 C the MY170 grade gives the lowest conductivity in ...

Brand Name:MYREAL

Model Number:MY-XPS-RF/250

Place of Origin:China

The RF250 board is built for the inverted roof, the one position where insulation is exposed above the waterproofing membrane and must survive ballast, paving and service traffic. At 50 mm and 250 kPa it carries the weight of slabs and gravel while holding...

Place of Origin:China

Brand Name:MYREAL

Model Number:MY-XPS-FL/500

Foundations put insulation in the hardest position on a project: permanent soil contact, backfill pressure and a wet, alkaline environment. The FL500 board answers that with 500 kPa compressive strength at 100 mm, enough for ground-bearing slabs and strip ...

Brand Name:MYREAL

Model Number:MY-XPS-FL/1200

Place of Origin:China

Underfloor heating panels are thin by design, and a thin board has to do a thick board's job. The FL1200 board answers with 1200 kPa compressive strength at only 30 mm: the highest grade in the range, chosen because the screed, the floor finish and the ...

Place of Origin:China

Model Number:MY-XPS-FL/300

Brand Name:MYREAL

Most floor insulation fails slowly, through water rather than load. The FL300 board is the grade chosen when the floor is at risk of damp: ground floors without a reliable membrane, refurbishment over an existing slab, and floors that are laid and then ...

Brand Name:MYREAL

Place of Origin:China

Model Number:MY-XPS-WA/150

On a low energy wall the insulation has to earn its thickness. The WA150 board sits at the low end of the declared 0.026 to 0.035 W/(m.K) range, so a 40 mm layer delivers the U-value that would otherwise need a much thicker mineral board. That matters on ...

Model Number:MY-XPS-WA/200

Brand Name:MYREAL

Place of Origin:China

Internal wall insulation sits on the warm side, but the wall behind it still freezes and thaws, and the board has to survive the movement that comes with it. The WA200 board keeps more than 90% of its compressive strength after 50 freeze thaw cycles, which...

Model Number:MY-XPS-FL/350

Brand Name:MYREAL

Place of Origin:China

A freezer floor is the one place where insulation works at a temperature that would stop most materials behaving normally. The FL350 board is rated from -50 C, so it stays dimensionally stable and keeps its compressive strength at temperatures well below...