Brand Name:MYREAL

Place of Origin:China

1. Durable and Fireproof 2. Customizable Size Options 3. Widely applicable 4. Good insulation performance

Brand Name:MYREAL

Model Number:EPS-TC/50

Place of Origin:China

Lightweight Thermosetting Composite EPS Board 50 mm Panel for Fire Safe Building Envelope Thermosetting composite polystyrene board built on a foam matrix that holds its shape under fire exposure and produces no molten drips. It combines class A2 fire ...

Brand Name:MYREAL

Place of Origin:China

Model Number:EPS-G50

Graphite EPS Insulation Board 50 mm Low Lambda Panel for Energy Efficient Building Wall Graphite modified EPS board with infrared absorbing particles that lower thermal conductivity to 0.030 - 0.032 W/(m.K). The board helps walls meet tighter energy codes...

Place of Origin:China

Brand Name:MYREAL

Model Number:EPS-STD/30

Low Water Absorption EPS Board 30 mm Panel for Damp Prone Basement Wall Insulation Hydrophobic standard EPS board for basements, retaining walls and other damp prone details. Hydrophobicity above 97 percent keeps thermal performance stable over the service...

Brand Name:MYREAL

Place of Origin:China

Model Number:EPS-STD/40

Pre Cut EPS Insulation Board 40 mm Dust Free Panel for Quick Interior Wall Lining Works Standard EPS board factory cut to project sizes so installers can fix the panel straight from the bundle. Cutting waste and site labour drop sharply on repetitive ...

Brand Name:MYREAL

Model Number:EPS-STD/60

Place of Origin:China

ETICS EPS Insulation Board 60 mm Render Ready Panel for External Wall System Renovation Standard EPS board dimensioned for external thermal insulation composite systems. The board takes adhesive, mesh reinforcement and render without surface treatment and ...

Place of Origin:China

Brand Name:MYREAL

Model Number:EPS-HD/100

High Density EPS Floor Board 100 mm Rigid Panel for Underfloor Thermal Insulation High density EPS board with 30 - 60 kg/m3 density for floors carrying screed, underfloor heating pipe and finished floor loads. Compressive strength from 200 to 800 kPa ...

Model Number:MY-XPS-RF/350

Brand Name:MYREAL

Place of Origin:China

A green roof adds weight, water and roots to a flat roof, and the insulation has to carry all three. The RF350 board is the roof grade chosen for planted roofs: 350 kPa compressive strength supports the overburden of substrate, drainage layer and mature ...

Model Number:MY-XPS-FL/400

Place of Origin:China

Brand Name:MYREAL

An industrial floor loads the insulation far beyond a domestic slab: plant, storage racks and moving equipment all bear on the same thin layer. The FL400 board is the heavy duty grade of the range at 400 kPa, specified as ground insulation under industrial...

Model Number:EPS-STD/20

Brand Name:MYREAL

Place of Origin:China

Exterior Wall EPS Insulation Board 20 mm Panel for Building Thermal Protection Works Moulded standard EPS board for exterior wall thermal protection. The fused bead structure gives stable thermal performance, low weight and fast site installation for new ...

Model Number:EPS-STD/50

Place of Origin:China

Brand Name:MYREAL

Roof EPS Insulation Board 50 mm Thermal Panel for Flat Roof Solar Heat Protection Standard EPS roof board for flat roof decks and metal roofing assemblies. It reduces solar heat gain through the roof slab and keeps interior temperatures stable in hot ...

Place of Origin:China

Brand Name:MYREAL

Model Number:MY-XPS-WA/150

On a low energy wall the insulation has to earn its thickness. The WA150 board sits at the low end of the declared 0.026 to 0.035 W/(m.K) range, so a 40 mm layer delivers the U-value that would otherwise need a much thicker mineral board. That matters on ...

Place of Origin:China

Model Number:MY-XPS-WA/200

Brand Name:MYREAL

Internal wall insulation sits on the warm side, but the wall behind it still freezes and thaws, and the board has to survive the movement that comes with it. The WA200 board keeps more than 90% of its compressive strength after 50 freeze thaw cycles, which...

Model Number:MY-XPS-FL/350

Brand Name:MYREAL

Place of Origin:China

A freezer floor is the one place where insulation works at a temperature that would stop most materials behaving normally. The FL350 board is rated from -50 C, so it stays dimensionally stable and keeps its compressive strength at temperatures well below...

Model Number:MY-XPS-FL/350

Brand Name:MYREAL

Place of Origin:China

A basement floor carries the slab, the finishes and whatever the room is used for, and it is also the surface where ground moisture arrives. The FL350 board works as an accessory for underground thermal insulation: it insulates, holds back moisture and ...

Brand Name:MYREAL

Place of Origin:China

Model Number:MY-XPS-RF/250

The RF250 board is built for the inverted roof, the one position where insulation is exposed above the waterproofing membrane and must survive ballast, paving and service traffic. At 50 mm and 250 kPa it carries the weight of slabs and gravel while holding...

Place of Origin:China

Brand Name:MYREAL

Model Number:MY-XPS-FL/500

Foundations put insulation in the hardest position on a project: permanent soil contact, backfill pressure and a wet, alkaline environment. The FL500 board answers that with 500 kPa compressive strength at 100 mm, enough for ground-bearing slabs and strip ...

Place of Origin:China

Brand Name:MYREAL

Model Number:MY-XPS-FL/1200

Underfloor heating panels are thin by design, and a thin board has to do a thick board's job. The FL1200 board answers with 1200 kPa compressive strength at only 30 mm: the highest grade in the range, chosen because the screed, the floor finish and the ...

Place of Origin:China

Model Number:MY-XPS-FL/300

Brand Name:MYREAL

Most floor insulation fails slowly, through water rather than load. The FL300 board is the grade chosen when the floor is at risk of damp: ground floors without a reliable membrane, refurbishment over an existing slab, and floors that are laid and then ...

Model Number:CS-RMS

Brand Name:MYREAL

Place of Origin:China

MYREAL removable insulation covers are made as a box or jacket shaped to the outline of the valve, flange or steam trap. A calcium silicate board insert sits inside a fabric or metal outer jacket and the cover closes with quick release lacing and straps...