wire mechanical testing machine

Brand Name:DIXUN

Model Number:DX-2500B

Place of Origin:China

Wire Diameter 2.5-5mm Hole Size 50*50mm Steel Wire Mesh Welding Machine Steel Wire Mesh Welding Machine Introduction This machine adopts synchronous control technique, both welding time and cent-control welding is composed of PLC program system. The input front-panel has two forms, touch screen and keyboard, it makes the machine more intelligent and reasonable. The weft wire...

Brand Name:Shandong Shengtai Instrument Co., Ltd.

Model Number:SH120

Place of Origin:CHINA

SH120 Automatic four ball machine SH120 Fully Automatic Four-Ball Machine Lubricant Wear Resistance Tester evaluates the load-carrying capacity of lubricants primarily through sliding friction under extremely high point contact pressure conditions. It ...

Brand Name:HOOHA

Model Number:ZY6082 HPN

Place of Origin:China

...grounding wire core), on soft line horizontal section of the conductor 48 ~ 62 HZ approximate sine wave ac 120 v voltage, at the same time impose test on soft wire flame 2 minutes, soft wire of power line should not arcing between core. Meet the standard:

Brand Name:Haida

Model Number:HD-B617

Place of Origin:China

...Wire Material Electronic Tensile Strength Tester Mechanical Testing Machine Product Description Universal Mechanical Electronic Wire Material Tensile Strength Tester is used to determine the breaking strength and extension ratio at break to various woven and non-woven fabrics. This machine can also be used for the tensile tests...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-K904

...Testing Machines / Hair Dryer Line Tail Wire Bending Test Machine Application : Hair dryer line tail bending test machine is suitable for testing wire in the maximum angle allowed in the resistance to bending and breaking rate , can be connected to a load test . dryer line tailbending testing machine testing principle : The sample is fixed on the fixture , test...

Brand Name:Lonroy

Model Number:LR-Q031

Place of Origin:China

Wire Bending Testing Machine Touchscreen Cable Flexing Tester Lab Test Machine LR-Q031 Touchscreen Wire Bending Testing Machine Cable Flexing Tester 1. Product Description The wire bending and swaying testing machine is also known as the wire bending testing machine or the swaying testing machine. This testing machine...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test speed 60 ,90, 120m/min 60, 90, 120m/min 30,

Brand Name:PTE

Model Number:WAW-600E WAW-1000E

Place of Origin:China

... This machine is applied in analysis and research of statics property testing of tensile, compression, bending, cutting, holding and other items of metal and nonmetal material (including composite material). It can achieve ReH, ReL, ...

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.

Brand Name:lixian

Model Number:HZ-4012

Place of Origin:China

.... It is mainly used for theФ3.0～Ф10.0 metal wire torsion testing machine. The function of which is determination of metal wire to withstand severe plastic deformation in one-way or two-way reversed ability and display of wire surface and inner defect.

Brand Name:LIYI

Place of Origin:Guangdong, China

...Wire Reverse Bending Test Machine Cable Plug Bending Testing Machine / Wire Bend Test Machine The Liyi Plug Wire Reverse Bending Test Machine complies with UL817 and other relevant standards for general safety requirements of software components and power supply cords. Designed for bending tests of power cords and DC lines, this machine is ideal for manufacturers and quality inspection departments. Specifications Test...

Brand Name:Infinity Machine

Model Number:IC2361A

Place of Origin:Made In China

Test Angle 0~180° Adjustable Cable Fatigue Test Wire Endurance Testing Machine Model:IC2361A Application: This equipment is suitable for fatigue testing of various types of wires, cables, steel cables and other wires to detect the reliability of the wires...

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Brand Name:GSKA

Model Number:Universal Tensile Testing Machine

Place of Origin:Dongguan China

Can Be Equipped With Multiple Sensors Wire Tensile Testing Machine OEM Matters needing attention: One, tensile testing machine load, the pointer tremble or stop 1, clutch gear wear: need to repair or replace. 2, friction disk of the skin washer or spring ...

Brand Name:Tony

Model Number:TNJ-002

Place of Origin:China

...Mechanical Testing Product Application Suitable for family, hotel, hotels, restaurant and other place to use the table , cabinets, chairs and stools etc home finished products to determine the durability and impact etc performance test. Don’t including the wall and the wall-mounting cabinet accessory strength and durability,. Standards: The test machine...

Brand Name:ASLI

Model Number:AS-PC-5000

Place of Origin:CHINA

...testing machine wire tension testing machine special material tension stripping machine manufacturers custom Specification Model AS-PC- Volume Capacity (Kg) 50,100,200,500,1000,2000,5000,10000,20000 Load Accuracy 0.5% Load Resolution 1/100,000 Valid Width (mm) 400 Max. Route (mm) 1000(not including clamp) Test...

Brand Name:KEJIAN

Model Number:KJ-1065A-H

Place of Origin:Dongguan,China

...’s high-level model, which is designed and produced specially for peel testing of adhesive industry. Its all accessories adopt import high-level brand accessories with higher accuracy and smaller mechanical structure. Technical Parameter Capacity 2, 5

Brand Name:HOOHA

Model Number:ZY6233

Place of Origin:Guangdong

... with gjb17.17-1984 standard requirements. Main parameters: The testing device and control box are made of CNC machine tool, and the arc shape is beautiful and generous Cold plate spraying. The test device is equipped with 3M long glass Windows and the

Brand Name:HongCe

Model Number:SH-7

Place of Origin:China

Calibration Device for Spring Impact Hammer SH-7 Specifications: Test object Spring operated impact hammer Reference standard IEC 60068-2-75 Annex B; IEC 60068-2-63 Annex A Test Accuracy calibration Accuracy 0.01J Repeat accuracy ±0.01J Measurement range...