water testing ammonia probe

Brand Name:Desun Uniwill

Model Number:DSN260

Place of Origin:Shanna xi,China

...levels in water and is suitable for use in a variety of water bodies, including lakes, streams, groundwater and waste water. 1. With pH, potassium ion and temperature compensation, suitable for monitoring a wide range of water quality environments. 2. Each

Brand Name:INVBIO

Model Number:INV-1205

Place of Origin:China

...Water Test Strips 7 in 1 and Fish Water Testing Strips Ammonia & Nitrogen Test Kit Remove all doubt by testing your aquarium water for ammonia with the Ammonia Test Strips developed by INVBIO. The test is easy to use and the results can be read in just 30 seconds, so you can test...

Model Number:UP-4021

Brand Name:YOUBI

Place of Origin:CHINA

Water Absorption Tester for Shoe Insole Absorption & Desorption Test UP‑4021 Product Overview The UP-4021 Water Absorption Tester is professional footwear laboratory test equipment for evaluating water-absorbing and water-desorption performance of shoe insole materials. It simulates real-life walking conditions: test specimens are mounted on a damp base plate and undergo repeated flexing under defined pressure. After preset test cycles or test

Model Number:AIC-F8210

Brand Name:AI

Place of Origin:China

I.Brake Fluid Water Tolerance Tester ISO4925 This Water Absorption Test Instrument is suitable for evaluating the effect of water on brake fluid. The test principle involves adding humidified brake fluid to a conical centrifuge tube, keeping it at -40...

Categories:Deep-sea Environmental Simulation Test Equipment

Country/Region:china

...0-12,000 m deep water (120 MPa). It is widely used for pressure resistance and sealing performance tests of products operating under deep water high pressure conditions, including various deep submergence vehicles, underwater robots, deep sea detectors and

Brand Name:YU YANG

Model Number:YY0014

Place of Origin:CHINA

Aquarium Ammonia Water Test Kit Ph Free Chlorine Bromine Water Test For Swimming Pool Description: The UV Aging Test Lamp is an effective tool for the sunlight resistant test of non - metallic materials used in different industries. It is applicable to ...

Model Number:XGY-20C

Brand Name:JHH

Place of Origin:Beijing, China

...Testing Machine Advanced automated testing equipment for hydrostatic and burst strength evaluation of PE, PPR, and PVC pipes. Applications This fully automated hydrostatic pressure test apparatus evaluates pressure resistance performance of thermoplastic pipes, pipe fittings, and valves. It serves multiple sectors including building construction, water...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe...

Place of Origin:Shaanxi, China

Brand Name:Kacise

...water analyzer water quality ammonia nitrogen sensor tester Introduction The KWS-201 online ammonia nitrogen sensor features a powerful anti-jamming circuit design with 4-20 mA and RS485 outputs with temperature compensation. Used to test the ammonium ion content in water...

Brand Name:PEGO

Model Number:PG-TPB/PG-TP12/Test Probe 13/Test Probe 41

Place of Origin:China

...Test Finger Probe Kits Test IEC61032 Test Probe B Test Probe 12 Test Probe 13 Test Probe 41 The IEC61032 test probe b, test probe 12, test probe 13 and test probe 41 are designed according to IEC61032 standard. All the probes are made of nylon and steel and can be with a third-lab calibration certificate authorized by ISO17025 lab. 1. Introduction of IEC61032 Test Probe B: Jointed test finger (test probe...

Model Number:CZ-302/302L/318/328/328A/333

Brand Name:JADE

Place of Origin:China

... water tested at the plant is fully compliant. Retailers reject those lots, and consumers read the smell as contamination, which damages brand trust far beyond the value of a single shipment. This matters most for large water brands, where a single off

Model Number:W20180508003

Brand Name:CEC TANKS

Place of Origin:CHINA

...Testing for Data Center Water Tanks Commission and accept a data center water tank with a defined sequence: review the factory 1500 V holiday-test record, verify bolt torque and joint prep, perform a controlled fill test against a leakage criterion, document the hydro test...

Brand Name:HeJin

Model Number:HT-I09

Place of Origin:China

...Test Pin Probe HT-I09 IEC61032 Figure 9 Test Probe13 Metal Pin Tip Diameter Ф3 Standard of Short Test Pin Probe: IEC61032 figure 9 Test Probe 13, IEC60950 figure 2B, IEC60335 and IEC60065. Application of Short Test Pin Probe: This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Feature of Short Test Pin Probe: It can be used for enclosure protection test...

Brand Name:SHC

Model Number:SC-Kit 1

Place of Origin:China

...Test Probe Kit Electric Safety Check Device List: IP1X Test Probe A IP2X The Standard Test Finger Probe IP3X Test Probe C IP4X Test Probe D IEC60335 Test Probe A Specification: IP1X Probe A /Test Probe A 1, According to: IEC61032:1997 /IEC60529:2001 and UL 2, IP1X Probe A (Test Probe A) is necessary appliance for household and similar electrical appliance of against electric shock protection test...

Brand Name:KingPo

Place of Origin:China

... information: The test thorn probe is intended to verify the protection against access to glowing heating elements. It complies with IEC61032 figure 16 Test probe 41, IEC60335 standard requirements. Standard:IEC61032 test probe 41 figure 16 and IEC60335.

Brand Name:KERONG GAS

Model Number:ANH,NHP

Place of Origin:China

Low Water Content Ammonia Dissociation Unit With 7bar Outlet Pressure Product description Our Low Water Content Ammonia Dissociation Unit with 7bar Outlet Pressure is designed to generate high-quality dissociated ammonia gas for heat treatment, annealing, ...

Brand Name:Sinuo

Model Number:SN2210-6T

Place of Origin:China

IEC 60529 IP2X 12.5mm Test Sphere Probe Built-In Force 0~50N for Enclosure Protection Test Product Description: The SN2210-6T Test Probe B with Force is a precision test finger manufactured in strict accordance with IEC 61032 Figure 2 requirements. It is ...

Brand Name:kerang

Model Number:HT-I01

Place of Origin:CHINA

Test Sphere Probe HT-I01 Standard:IEC61032 fig.1, IEC60529 IP1 and IEC60065. Application:This probe is intended to verify protection the back of hand of persons against access to hazardous parts. It is also the necessary probe used to prevent the hazardous parts and solid foreign objects from entering. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:This test probe...

Brand Name:kingpo

Model Number:KP-SH01

Place of Origin:china

...Test Finger Probe Young Adult Arm Probe Stainless Steel Probe Standard description Our product of Test Finger Probe (see Figure 1)shall not to be able to make contact with the hazardous moving parts when it is inserted into the opening up to the entire length of each arm probe.the articulations of each probe shall be manufactured to enable a rotation±90° about the articulations axis.The movements of the joints of each probe

Model Number:TP04

2.5mm rod test probe,test probe D iec 61032,test finger probe,test probe IEC 529 IP4X code for impact and access testing Model TP04 2.5mm rod test probe,tes probe Dviec 61032 Test Probe is intended to verify the protection of person aganist access to to ...