tungsten carbide composite welding bar

Brand Name:Rixin

Model Number:K20

Place of Origin:China

... scrap and elastic matrix alloy,Outer layer of the special flux and coloring is marking scrap grade,the composition of sintering tungsten carbide scrap is mainly CO and WC,The hardness is HRA 89~91,tire body matal is Ni and copper alloy,strength can up to

Brand Name:Sanxin

Model Number:SX0996

Place of Origin:China

... kind of tungsten carbide rod is mainly used for downhole milling ability. The tungsten carbide blocks with sharp edges and corners are knocked off from top grade of 100% virgin raw material, which holding superior hot- resistance and abrasion ...

Brand Name:Zhuzhou Jintai Cemented Carbide

Model Number:Various

Place of Origin:Hunan, China

Metal Tool Welding Rod Tungsten Carbide Blank Round Bars Solid Carbide Drill Rods Material composition: 1.Physical Properties: A) Hardness greater than or equal to 92.8 HRA； B) Density greater than or equal to 14.2 g/cm³； C) TRS greater than or equal...

Brand Name:Zhenfang

Model Number:ZF014

Place of Origin:China

...Tungsten Carbide Composite Rods , Tungsten Carbide Round Bar Tungsten carbide rod is widely used for High quality tungsten carbide tools such as milling cutter, endmill, drills, reamers, etc. We announce that we have achieved best cost-effectiveness tungsten carbide rod for cutting blanks.Becasue We used unique method of pressing technology and sintering technology. We manufactured carbide...

Brand Name:JWE

Model Number:YGU70/YGN70

Place of Origin:China

Tungsten Scrap Carbide Composite Welding Rods For Brazing And Down Hole Tools Production Description The Composite Alloy Rods are normally applied using a large oxy-acetylene torch, in conjunction with a range of our brazing fluxes or with our gas flux system where the flux is introduced to the gas before the flame, thus making it easier for the operator to place the cutting carbides...

Brand Name:KINGTOOLS，WUWTOOLS

Model Number:composite alloy rods

Place of Origin:China，Sichuan

450mm 30% Copper 70% Tungsten Carbide Composite Alloy Rods For Surfacing Oil Description of Carbide Composite Rods: Tungsten carbide composite rods, specifically designed for safeguarding high-wear components in the oil and gas drilling, geothermal...

Brand Name:VKD

Model Number:Carbide water jet nozzle

Place of Origin:Hunan, China (Mainland)

... and shape, grade K20(YG6), K30(YG8), YG3X(K01),YG15, YG20,YT15(P10),YW1(M10) Applications of carbide Tungsten carbide round rod is mainly applied in making drills, end mills and reamers. And it is also

Brand Name:OUQI

Model Number:Cemented Carbide Rods

Place of Origin:China

...160mm. Application: Corrosion Resistance WC solid tungsten carbide plunger high precision cemented carbide rod. Suitable for machining composite materials, such as aluminum‐magnesium alloys, plastics, reinforced plastics, carbon, fiber, iron‐based...

Brand Name:LIAN XIANG

Place of Origin:ChengDu China

... Advantage Wear-resisting Dimensions Customized Application of Tungsten Carbide Plate Application of Tungsten Carbide Plate: 1. Suitable for the production of cast iron rolls and high chrome roll knife. 2. Applicable to the production of discharge plate,

Brand Name:HIPPSC

Model Number:SCRG-61005-M06

Place of Origin:Dongguan, China

Sintered Tungsten Steel Rod Tungsten Steel Replaceable Head SCRG Ⅰ​. Features 1. Made from fully tungsten steel. 2. High rigidity and good shock resistance. 3. Super precision in deep hole machining. 4. Suits abundant indexable boring bar/head. 5. ...

Brand Name:OED or OEM

Model Number:Carbide Rods

Place of Origin:China

Grain Size 0.4μm K10-K20 Tungsten Carbide Rods As Engraving Tools Metal Pierce Tools​ Good wear resistance and ultrafine grain size, high wear resistance endmill, and engraving tools are recommended. Suitable for cutting PCB and plastic. Carbide cutting ...

Brand Name:Fengke

Place of Origin:China

Tungsten carbide Short rods diameter from 3mm-25mm, common length 45mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, 125mm, 140mm, 180mm Tungsten carbide long rods diameter from 1mm-50mm, common length 300mm, 310mm and 330mm.

Brand Name:PM

Tungsten Carbide Blocks MD45A Technical features I: High performance cemented carbides for molding.Polarization curve (corrosion current reduced, corrosion rate decreased significantly, corrosion resistance improved significantly) Technical features II: ...

Brand Name:BENEMETAL

Model Number:DIA08MM-DIA32MM , LENGTH100MM-400MM

Place of Origin:ZHUZHOU

...carbide boring bar turning tools. Application: Its purpose to prevent tools from shanking and to control. It is very important for CNC and mechanical working industry. Features of solid carbide bar: 1. High rigidity. Improve surface finish and perpendicularity. Made of pure tungsten carbide...

Brand Name:Sanyinghe

Model Number:As your requirement

Place of Origin:Zhuzhou, China

YB10 Model Rough Tungsten Steel Round Bar Length Is 100MM Density Is 10g/Cm High Anti-Stable Strength Product Description: 1. The length of the YB10 model rough tungsten steel round bar is 100mm, and the diameter is 2mm~60.5mm. 2. Has good wear resistance...

Brand Name:xincheng

Place of Origin:xiamen

Product Description: Tungsten carbide rods are essential components in various industrial applications due to their exceptional properties such as high wear resistance, high hardness, high strength, and corrosion resistance. These characteristics make the...

Place of Origin:China

Brand Name:Satellite

Model Number:W232,W262,W273,W263,W252,W221,W242

Grade Density(g/cm3) Hardness(HRA) TRS(MPa) Applications recommended YG6X 14.95 91.5 1800 For drawing steel and nonferrous wires or bars of less than D6.00mm under not so much stress. YG6 14.95 90.5 1900 For drawing steel, nonferrous alloy bars of less tha...