toy test equipment

Categories:Rubber Testing Equipment

Country/Region:china

... insulation media such as plastic and rubber. Intelligent recording: Automatically collect key data such as breakdown voltage and time to generate standardized test reports with just one click, supporting data storage and

Model Number:SN2210-83

Brand Name:Sinuo

Place of Origin:China

IEC 60335-2-27 Clause 22.103 Φ100mm Cylinder Rod for Emitter Protection Testing Equipment Product Overview The IEC 60335-2-27 Clause 22.103 Emitter Protection Test Probe is a specialized test probe designed for evaluating the protection of emitters used...

Model Number:CP-MCU063002

Brand Name:CPET

Place of Origin:China

Water-cooled Inductor New Energy Micro-domain Controller Aging Test Equipment The entire set of equipment adopts a combination of 2 aging cabinets and 1 electrical control cabinet. Dimensions: length 6000mm, depth 1400mm, height 1800mm. The product ...

Brand Name:YUYANG

Model Number:YYT030

Place of Origin:China

... the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety.

Brand Name:SKYLINE

Model Number:SL-S50

Place of Origin:CHINA

...the most onerous position with a mass of 50 kg+/-0,5 kg on its standing or sitting surface for 5 min. For toys labelled as not suitable for children 36 months and over, load the toy with a mass of 25 kg+/-0,2 kg. Place the toy on a 10°+/-1°slope in the

Brand Name:HTI

Model Number:TW-257

Place of Origin:,China(Mainland)

... by force. Pull the toy at a constant speed of 2 m/s ± 0.2 m/s on a surface covered with aluminum oxide sand paper P60 and determine the maximum pull force. Toys will be under test placed on the conveyor belt, the drive wheel until the toy speed of 2m/s

Brand Name:YUYANG

Model Number:YYT005C

Place of Origin:China

...Toys Testing Equipment Rattle Sound Bell Toys Tester Description: The bell toys tester is also called the sound toys tester, the toys testing template AB and sound toys testing template. There are two kinds of template: the round one and the oval one. It stimulates the volume of the mouth to check whether the toys or the toys...

Brand Name:GESTER

Model Number:GT-M04-1

Place of Origin:China

.... Standards: EN-71-1 section 8.17.1 Test principle The catapult was placed into the mouth-actuated projectile toys. Add pressure of 13.8kPa ± 5% on the mouthpiece, lasts for 5 seconds, test a total of 10 times. Detecting whether the projectile through the

Brand Name:DAXIAN

Model Number:DX7004

Place of Origin:China

...Testing Equipment for Children Safety Toys Test Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old Standard Configuration: Accessibility Probes AB 1 set,Test

Model Number:ST005C

Brand Name:Shandong Shengtai Instrument Co., Ltd

Place of Origin:CHINA

...Testing Crusher Grinder Grain Moisture Testing Crusher Grinder Grinding capacity 200g/min 20 adjustable levels ISO 712 Standard: GB/T 21305 GB/T 10362 ISO 712 GB 5009.3 GB/T 24898 GB/T 24900 GB/T 24896 GB/T 20264 The ST005C Grain Moisture Crusher is a disc-type crushing mill specifically designed for testing grain moisture samples, serving as an ideal equipment...

Place of Origin:China

Brand Name:HongCe

Model Number:TF-1

Toy Flame Test Equipment , Toy Flammability Safety Test Apparatus Product information: This device is designed and manufactured according to ISO8124 toy safety combustion performance. Adopting the burner that conforms to ISO6941, this testing device is suitable for combustion performance testing of all kinds of toy...

Brand Name:kingpo

Place of Origin:china

... intended for use by children under 8 years of age, and such edges exposed in normal use or as a result of reasonably forseeable damage or abuse of such toys and articles, present a potential risk of injury by laceration or avulsion. Standards: EN 71-1

Brand Name:AI

Model Number:SLQ

Place of Origin:China Mainland

... requirements relating to all toys and specific requirements and methods of test relating to the following toys, which are considered as being those presenting the greatest hazard: -toys to be worn on the head: beards, moustaches, wigs, etc. made from

Brand Name:KINGPO

...Test Equipment For Toy Subsidiary Materials Toy Flammability Safety Test Apparatus Product information: This device is designed and manufactured according to ISO8124 toy safety combustion performance. Adopting the burner that conforms to ISO6941, this testing device is suitable for combustion performance testing of all kinds of toy...

Brand Name:Haida

Model Number:6023-HD

Place of Origin:China

Toy Comprehensive Combustion Tester Product Description Toy Comprehensive Combustion Tester tester evaluates the combustion performance of children's clothing, toys, and accessories by measuring burning speed and duration. It is designed for: Children's costumes (e.g., capes, flowing garments), Enclosed toys (e.g., play tents, toy houses), Soft-filled toys (e.g., plush toys), Wearable toys (e.g., masks, wigs). Test...

Brand Name:GAOXIN

Model Number:GX-MZ

Place of Origin:Guangdong, China (Mainland)

Toy Packaging Industry Transportation Simulation Vibration Test Equipment Low Noise 1.Specifications Max. Test Load 0.5T Frequency Range 60-300 round/min adjustable Amplitude Range 25.4 mm P-P(1 inch) Programmable ...

Brand Name:LIYI

Model Number:145

Place of Origin:Dongguan

... attached snap fasteners onto garments or toys. Button Snap Pull Tester complies with ASTM PS79-96, ASTM F963 , etc. What is our Garment Button Pull Tensile Testing Machine used for? Garment Button Pull Tensile Testing Machine, to determine the holding or

Brand Name:lixian

Model Number:HZ-2004A

Place of Origin:China

...Constant Temperature Humidity Test Chamber Equipment With HD Camera For Electronic Toys Testing Temperature Range 70 °C To 200 °C Adjustable Equipment summary: Electronic Toys Walk-in constant temperature and humidity testing machine is suitable for ...

Brand Name:HAIDA

Model Number:6023-HD

Place of Origin:Guangdong, China (Mainland)

Toy Comprehensive Combustion Tester Description: Toy Comprehensive Combustion Tester tester evaluates the combustion performance of children's clothing, toys, and accessories by measuring burning speed and duration. It is designed for: Children's ...

Brand Name:ASLi

Model Number:AS-100

Place of Origin:China

...Testing Machine , Shock Test Equipment , Inspection Lab Equipment Application: 150 ~ 300 RPM Package Vibration Testing Machine , Shock Test Equipment , Inspection Lab Equipment to test the vibration-resistance of packed Toys, electronics, furniture, gift, ceramics,equipment...