test mandrel

Brand Name:Kingpo

Model Number:ISO14457-figure 3

Place of Origin:china

...test mandrel Test mandrel The test mandrel shall have the dimensions shown in Figure 3. The shape of the shank end for all types of test mandrels shall be either conical or rounded at the discretion of the manufacturer or test house to avoid damaging of the chuck system. The mandrel...

Brand Name:CCSC

Model Number:Model D

Place of Origin:China

Model D BOP Test Stump/BOP Test Stand with API 6A used for BOP test Blow Out Preventer (BOP) test stumps are often used for manufacturers to test their BOP or drillers testing operations at off-shore and on-shore drilling rig. BOP TEST STUMP is designed...

Brand Name:Pego Tester

Model Number:PG-MTD

Place of Origin:China

...Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel Test Equipment is designed according to IEC61588 figure 6, IEC60950 annex A, IEC60065 and GB1921. It is used for the insulating thin layer of the power transformer and supply unit as well as the similar products to do the spindle test, mechanical strength test and abrasion test. This test...

Brand Name:Techcore

Model Number:RMSJ315001

Place of Origin:China

...Test ToolsRound Mandrel Slip Joint DST Tool 3 7/8" Size Introduction of Round Mandrel Slip Joint 3 7/8" round mandrel slip joints are available for the slim hole well testing service, fracturing operation. Round Mandrel Slip Joint is mainly used in FUL-FLO formation test, fracturing, acidizing operations in drilling operation. The round mandrel...

Brand Name:ZZ TOP OIL TOOLS

Model Number:Round Mandrel Slip Joint

Place of Origin:China

...Mandrel Slip Joint For DST service Fracturing Service The Round Mandrel Slip Joint is the part of drill stem testing tool string, the slip joint accepts the movement associated with ocean heave or temperature change without allowing the movement to disturb the placement of downhole tools. The round mandrel slip joint has the following characteristics: • Top of the mandrel...

Brand Name:HongCe

Model Number:HX9804

Place of Origin:China

...following: Three test samples, each individual sample consisting of three or more layers of non-separable thin sheet material forming REINFORCED INSULATION , are used. One sample at a time is fixed to the mandrel of the test fixture (Figure 14) as shown in

Brand Name:KINGPO

Place of Origin:Mainland China

...Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test...

Brand Name:Sinuo

Model Number:SN2204

Place of Origin:China

...Mandrel Test Apparatus For Tensile Strength Verification Product Information For Metal Mandrel Test Apparatus: This test apparatus conforms to IEC 62368-1:2018 clause 5.4.4, IEC60950-1:2013 clause 2.10.5.8, Annex AA, figure 14~16, IEC60558-1 Fig6, etc. It is used for tensile and electrical strength verification for non-separable thin layer materials. This test...

Brand Name:RuiXin

Model Number:2.25inch

Place of Origin:China BaoJi

...Test Tool Running Tools Wireline Tools Lock Mandrel I.Overview The N-Test Tool is used to pressure test the line above the threaded joint mounted in it. The tool is designed to maintain only the pressure from above, allowing a small amount of flow from below. This is the third type of plug, which maintains pressure from above. Test tubing - It is usually tested...

Brand Name:VCTSY

Model Number:CM-5---CM-7

Place of Origin:China

...Mandrels(CM-5---CM-7, CM Series), Surface Testing Pressure 8500psi The CM series conventional gas lift mandrels are used with the 1" OD or 1.5" OD conventional injection-pressure-operated gas lift valves. This product is equipped with standard NPT threads to assure reliability of sealing. Features Surface testing...

Brand Name:HeJin

Model Number:HX9804

Place of Origin:China

Mandrel Test Device IEC Test Equipment 150N Test Force Manual Control Standard: IEC 61558-1 ‘Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests’ clause 26.3.4; IEC 60065-1 ‘Audio, ...

Brand Name:DAXIAN

Model Number:DX8403

Place of Origin:China

... or round insulated cores at low temperature. The manual low-temperature impact test device is used to measure the samples of wire and cable insulation and jacket, plugs and sockets, insulating electrical sleeves and accessories for construction. After

Brand Name:Btutest

Model Number:BTU-CCMBTHQ

Place of Origin:Made in China

... rod, and clamp the fixing plate. → bend the test plate along the conical axis with the manual operating lever → bend the sample 180 degrees with uniform force within 15 seconds → remove the ...

Place of Origin:China

Brand Name:KeRang

... (d) of the test piece (mm) Number of turns D≤2.5 10 2.5﹤d≤4.5 6 4.5﹤d≤6.5 4 6.5﹤d≤8.5 3 8.5﹤d 2 Test condition: The diameter of the mandrel shall be between 4 and 5 times the diameter of the test piece. Standard equip with the mandrel :

Brand Name:SDA

Model Number:3DY600/125

Place of Origin:China

Rubber Hose Hydro Pressure Test Pump And Hose Mandrel Depoling Machine 1000bar Details: 1.Power end crankshaft housing is made by the cast iron.it is stronger than the aluminium alloy. 2.Cross head is made by the Babbitt hard alloy.it has a long working ...

Brand Name:Techcore

Model Number:RD Circulating Valve

Place of Origin:China

...Testing The Rupture Disc Circulating valve is the same as RD Safety circulating valve except short of ball valve section, the annulus pressure made RD burst and the pressure goes into RD hole and push circulating mandrel forward, then open the circulating ports. The tool is composed of three major sections: 1. The power section consists of a power mandrel...

Brand Name:iqualitrol

Model Number:EVS-1603

Compact and sturdy structure Cylindrical Mandrel Bending Tester EVS-1603 Brief Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dry paint on metal sheet. Perfect design, the instrument can be adapted...

Brand Name:Lonroy

Model Number:BGD 566

Place of Origin:China

BGD 566 ISO 6860 Conical Mandrel Tester Coating Shaft Bending Machine 1. Description: The Conical Mandrel Tester is designed in accordance with the standards of GB/T 11185 and ISO6860-84, and is used to evaluate the crack resistance or anti-peeling ...

Brand Name:HUATEC

Model Number:1605

Place of Origin:China

Conical Mandrel Bending Tester Product Introduction: A very robust mechanical unit for determining the elasticity, adhesion and elongation of dried paint on sheet metal. It can be used in accordance with ASTM D522. Technical Specification: Size 280×280×...

Brand Name:XIWUER

Model Number:CT811-33kVAC-50pF

Place of Origin:XIAN, CHINA

...mandrel capacitor CT811-33kVAC-50pF 6-36KV ceramic mandrel N4700/Y5T Features Small size High withstand voltage Low loss, good stability Dimension Applications High voltage supply circuit in duplicatior Voltage Rating Nominal Capacitance (pF) Nominal Capacitance Range Test Frequency:1kHz±20% Test...