temperature controlled ev connector testing equipment

Brand Name:Sinuo

Model Number:SNQC1015

Place of Origin:China

...EV Connector Temperature Controlled Water Bath Testing Equipment Complied Standards & Clauses This constant water bath is required by IEC 60811-402:2012, IEC502-83, etc. Equipment Overview This constant temperature water bath is specially designed for precision electrical performance testing...

Model Number:CP-Y3001

Brand Name:CPET

Place of Origin:China

...Temperature Control Aging Test Equipment Product aging description The total dimensions of the aging cabinet are: length 5000mm, width 1400mm, and height 2200mm The product size is 500*300*200mm. Each trolley can hold 8 products. One set of aging cabinet is equipped...

Brand Name:KingPo

Place of Origin:China

...QC/T 744-2006(monomer battery test), GB 8897.4-2002, IEC60086-4 , SN/T1414, SN/T1413 , YD1628, GJB2374, QB/T2052, IEC62133-2012, SAE-J2464,etc and any other test approaches needed. Introduction of Test Methods: Make the tested battery compressed amidst two

Brand Name:PEGO GROUP

Model Number:PG-TPB

Place of Origin:China

...be used to test the EV socket-outlets and vehicle connectors, it's strictly designed according to IEC61032 figure 2, and meets the requirements of IEC62196-1 clause 10.1, UL507, UL1278 figure 8 and IEC60529 figure 2. The test finger probe is intended to

Brand Name:Kejian Kinsgeo

Model Number:KJ-2091

Place of Origin:Dongguan China

...Control Electrical Temperature Controlled Chamber , Humidity Testing Equipment Design Standards: 1. GB/T2423.22-2002 2. IEC 60068-2-14:1984 3. GB/T2423.1-2001 (IEC 60068-2-1:1990) 4. GB/T2423.2-2001 (IEC 60068-2-2:1974) 5. GB/T2423.13-2002 (IEC 60068-2-33:1971) 6. IEC600682-33:1997 7. GB/T 2424.13-2002/IEC60068-2-33:1971 Use: This faster temperature...

Brand Name:HBYIQI

Model Number:HB-DC07-B-125L

Place of Origin:China

Battery Testing Equipment Battery Simulation High Altitude Low Pressure Test Chamber PLC Brand: HBYIQI Compliance with relevant standard test requirements or equivalent requirements: IEC62133 UL1642 UN38.3 GB 31241-2022 Applicance: With the wide ...

Brand Name:HongCe

Model Number:HC-HJMN001

Place of Origin:China

Walk-in high and low temperature environment simulation laboratory Product Introduction: The walk-in high and low temperature environment simulation laboratory is a high-performance testing equipment, which is mainly used to simulate various extreme high...

Brand Name:Envsin

Model Number:ESR

Place of Origin:China

..., and reliability of materials and products. Key features include: UV and IR Simulation: Provides precise ultraviolet and infrared light simulation to test material degradation.

Brand Name:LIB

Model Number:UV-260

Place of Origin:China

Accelerated Climate UV Test Chamber For Rubber Plastic Aging Weathering Standard of UV Test Chamber ● ASTM G 151 ●ASTM G 154 ●ASTM D 4587 ●ISO 4892-3 ●ISO 11507 ●SAE J 2020 ●AATCC TM 186 Description of UV Test Chamber Accelerated Climate UV Test Chamber...

Model Number:UP-4005

Brand Name:YOUBI

Place of Origin:CHINA

UP-4005 Leather Permeability Tester Product Introduction The Leather Permeability Tester, also known as leather water vapor transmission tester, is essential laboratory equipment for the footwear and leather industry. It simulates human sweat penetration ...

Brand Name:ATMARS

Model Number:AH-900 SERIES

Place of Origin:Guangdong, China

High and Low Temperature Chamber for Thermal Cycling Test Engine In additional to being much more functional, ATMARS test chambers have a sleek, beautiful, contemporary appearance. ATMARS reach-in standard models workspace volumes include: 80L, 100L, 150L...

Brand Name:Neware

Model Number:CE-6008n-60V20A-H

Place of Origin:China

...EV Battery Test Equipment Manufacturers Discharge Battery Testing System Features 1. High-level power density system with multi-channel integration and capable for energy recovering. 2. HMI operation, smart calibration. 3. Multiple adaption for BMS, supports the same/different charge and discharge ports, relay/MOSBMS solution, independent CAN and RS485 communication expansion, and DBC configuration. 4. Remote control...

Brand Name:Jianqiao

Model Number:JQA-202-335

Place of Origin:China

EV Battery Vibration Testing UN38.3 for EV Battery Testing Lithium-ion batteries are gaining popularity as the most common battery type used for electric vehicles. During their lifespan, these batteries undergo a variety of vibrations and temperature ...

Brand Name:HAIDA

Model Number:HD-E805

Place of Origin:Guangdong, China (Mainland)

...Temperature Muffle Furnace , Textile Testing Equipment Digital Controller Standard Parameters​ Technical Index HD-E805 Inner dimension (W*D*H) 200*300*120mm Outer dimension (W*D*H) 480*460*630mm Temperature range Max. 1200℃ Temperature precision +/- 5°C Controller Digital temperature controller...

Brand Name:HeJin

Model Number:HDX1307

Place of Origin:China

... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a

Model Number:YYE009

Place of Origin:CHINA

Brand Name:YUYANG

..., SUS304 stainless steel inner chamber, stable temperature and humidity control for laboratory environmental reliability testing. Applications This testing equipment evaluates material resistance to heat, cold, dry conditions, and humidity exposure.

Brand Name:Haida

Model Number:HD-E702

Place of Origin:China

...control Temperature Humidity Chamber Environmental Test Equipment Downloadable Information Thermal Shock Chamber.pdf UV Accelerated Weathering Tester.pdf Water spray test chamber.pdf Dust Chamber.pdf Haida IPX1 - IPX8 Rain Test Chamber.pdf Temperature and humidity chamber.pdf Operation Manual for UV Aging Test Chamber - Contr... Performance Environment testing chamber can simulate both temperature and humidity. Controlled...

Brand Name:Shengtai instrument

Model Number:SY264

Place of Origin:CHINA

...Testing Equipment is equipped with a pressure adjustment range of 0kPa(0kg/cm2)-392kPa(4kg/cm2), which enables the user to accurately control the pressure during the testing process. This feature ensures that the results obtained are consistent and reliable. The temperature range of the equipment is impressive, with a range of room temperature-500ºC±2ºC. This allows the user to test...

Brand Name:kingpo

Place of Origin:CN

Connector Test Equipment Overview Specialized equipment designed to measure moisture loss values in inline connectors during operational use, ensuring product reliability and performance standards. Equipment Control and Operation Control Functions Power Off/On: Controls main equipment power supply Emergency Stop: Immediately halts all equipment operations in emergency situations Test...

Brand Name:LIYI

Model Number:LY-WR10

Place of Origin:China

... is made from lightweight insulated panels for fast and easy installation. Usually for electronics temperature aging, like recharger, PCBA, Battery, LCD, scanners, monitors, LED, biological equipment, etc. Outside banding helps prevent leaking and keeps