strand wedge for slab anchors

Categories:Anchor Barrel and Wedges

Country/Region:china

...anchoring solution for 2-strand steel cables in prestressed engineering, the Slab Anchor Head Wedge for 2 Strands is your ideal choice. Designed for bridges, buildings, and geotechnical projects, this wedge anchor ensures stable, high-efficiency tension locking for 2-strand systems. What Is a Slab Anchor Head Wedge for 2 Strands? The Slab Anchor Head Wedge for 2 Strands...

Brand Name:NC871

Model Number:871

Place of Origin:Mainland China

... into the wedge-shaped taper hole of anchor plate, when using jack to tension the strand, after achieving the designed stress value, the jack is slowly released, the anchor of the clamping piece is retracted into the tapered hole of the anchor plate to

Brand Name:FAMOUS

Model Number:15-4

Place of Origin:China

Post-Tensioned Anchor System Tool Strand Stressing End Slab Post Tension Anchorage And Wedge For Building Construction Specification of 15-1-27 Anchorage Model Anchor Head Casting Corrugated Pipe Spiral Reinforcement Tensioning Jack φA*B φC*D Inner φ ...

Brand Name:FAMOUS

Model Number:15-1/31

Place of Origin:CHINA

Round Anchor Head Wedge Clip Slab Anchor Beam End Post Tensioning Steel Material Specification of Precast Girder Bridge Model Anchor Head Bearing Plate Corrugated Pipe Spiral Reinforcement Tensioning Jack φA*B φC*D Inner φ E φD*φE*H Coils (N) M15-1 φ45*44 ...

Place of Origin:China

...Wedge Block Bearing Plate Banana Bonded flat slab S3 anchors use 2 No. 15.24mm seven-wire prestressing strands or 3 No. 12.7mm seven-wire prestressing strand and the maximum characteristic tensile strength of 1960 MPa. The flat anchor is the first of two components that make up the flat slab...

Brand Name:QBH

Model Number:ISO13918 SD M10-M25

Place of Origin:CHINA

...Wedge Anchors The purpose of the shear stud is to provide a structural connection between the poured in place concrete slab and the structural steel. This structural connection distributes any shear forces that the structure may incur. Without the shear studs in place, there is a slip plane between the concrete slab...

Brand Name:PM

Model Number:M6-M18, 1/4"-1"

Place of Origin:CHINA

..., Hot Dip Galvanized Coating, and both 304 and 316 Stainless Steel grades. Wedge Anchors are available in 1/4"-20, 3/8"-16, 1/2"-13, 5/8"-11, 3/4"-10, 7/8"-9, and 1"-8 sizes, with the nut and washer included. SIZE: 1/4" - 1", M6 -M18. STANDARD: ASME ...

Brand Name:Suntech

Model Number:SKDS

Place of Origin:Ningbo

...Strand Product Overview The SKDS series Dual Cam Earth Wire Gripper is a high-grade, heavy-duty mechanical tensioning tool specifically engineered for permanent anchoring and pulling of overhead ground wires (OHGW) and GJ steel strands. Featuring an innovative mechanism of two opposing curved wedge...

Place of Origin:China

Brand Name:HORIZON

Model Number:rapid clamp

...wedge clips Rapid clamp for formwork or steel bars, formwork clip Material: Ductile Cast iron Used for bar diameter from 4mm to 10mm. Galvanized. Xingtai Horizon Formwork Co., Ltd., the manufacture of formwork system, formwork accessories and scaffolding parts. We supply: wall formwork, slab formwork, steel prop, jack base, wing nut, tie rod, water stop, washer plate, formwork clamp, plate anchor...