standard penetration automatic trip hammer

Categories:Drilling Core Barrel

Country/Region:china

... Standard Penetration(SPT) to BS 1377:Part 9:1990. SPT Drive rod and Split tube sampler are connected to the base of the Anvil, and drive into the ground by the falling weight. The Automatic Trip Hammer comprises a weight of 63.5 kgs complete with pick-up

Brand Name:ROSCHEN

Model Number:2"

Place of Origin:Germany

... BS 1377: Part 9: 1990. The Automatic Trip Hammer is manufactured for complying with the Standard Penetration Test (SPT) to BS 1377: Part 9: 1990. SPT Drive Rods and a Split Tube Sampler are connected to base of the anvil, and driven into the ...

Brand Name:Aoxing

Model Number:18", 24", 457mm, 610mm

Place of Origin:China

...Automatic Trip Hammer/Standard Penetration Test Equipment Product Description Components: 1 Outer Tube Assembly C/W Pawls 2 Inner Guide Shaft 3 Drop Weight 4 Anvil Product profile: SPT Trip Hammer The Automatic Trip Hammer is designed for driving the split tube sampler or cone assembly required for the Standard Penetration Test (SPT) or Cone Penetration Test (CPT). The hammer...

Place of Origin:China

Brand Name:SINOVO

... Core Bit Work Auto Trip Hammer SPT Drive Rods and a Split Tube Sampler for SPT- Hammer In order to carry out the Standard Penetration Test (SPT) to BS 1377:Part 9:1990. The Auto Trip Hammer, SPT Drive Rods and a split Tube Sampler are worked together.

Brand Name:Btutest

Model Number:BTU-SPT

Place of Origin:Made in China

Standard Penetration Test Soil Testing Machine Description: Using the hammering function, a cone probe of a certain specification is driven into the soil, and changes in the soil layer are determined based on the impedance of the penetration into the soil...

Brand Name:Shengtai instrument

Model Number:SH017

Place of Origin:China

...Automatic Constant Temperature cone/needle penetration Tester is designed and manufactured according to the technical requirements and relevant regulations of GB/T269 ASTM D217 and GB/T4509 ASTM D5 standards It is mainly suitable for testing the cone penetration of grease (or Vaseline). Meet Standard: ASTM D217 ASTM D1403 ASTM D 5 ASTM D217 Grease Cone Needle Penetration Meter Machine ASTM D217 Standard Lubricating Grease Cone Penetration

Brand Name:SOLLROC

Model Number:DHD360 HAMMER

Place of Origin:China

...wear characteristics. Specific heat treatment standards and special "stress relief" processes ensure consistent performance. DTH hammer are designed for maximum performance and hole cleaning ability and high penetration rate. Product Advantages: 1. All

Brand Name:Shandong Shengtai Instrument Co.,Ltd

Model Number:SH017

Place of Origin:CHINA

... meter is based on the Chinese chemical industry standard HG/T2502-1993 "5201 Silicone Grease" GJB3382-1998 "Specification for Thermal Conductive Silicone ...

Brand Name:MIROC DTH Rock Drilling Tools

Model Number:QL Series DTH Hammer

Place of Origin:China

... heat treatment standards and special "stress relief" processes ensure consistent performance. KSQ DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. At present, DTH drilling tool is widely used in

Brand Name:QIDELI

Model Number:SD8

Place of Origin:CHINA

.... Specific heat treatment standards and special "stress relief" processes ensure consistent performance. DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. Our bits are interchangeable with

Brand Name:DAXIAN

Model Number:DX9028

Place of Origin:China

...Penetration Resistance Tester Conform to the standard: in accordance with GB/T2812-2006, it also meets the requirements of the European standard EN397 test standard. Scope of application: Specially test the impact resistance and penetration resistance of the safety helmet, set the aluminum head model wearing the safety helmet on the high-sensitivity force sensor, and then use a steel hammer...

Brand Name:ZASP

Model Number:Suprema RB-SM501

Place of Origin:China

...Automatic and Mobile Solutions K12 M50 Hydraulic Road Blocker | Zero Penetration Design for Maximum Security PAS 68 Certified - 7500kg / 80kmh Impact Test Standard The K12 M50 hydraulic road blocker delivers exceptional anti-ram protection with zero penetration capability. Crash-tested according to IWA 14-1 & PAS 68 standards...

Brand Name:Tmteck

Model Number:TMH-225V

Place of Origin:China

... to GB /T9138-1988, JJG817-93 and JGJ/T23-2001 standards. The instrument is useful for quality Inspection Company, site testing or sampling and laboratory center, don’t have to manual calculation, machine automatically compute, grade and printing.

Place of Origin:Beijing

Brand Name:HUATEC

Model Number:HTH-225 V

... hammer HTH-225V submitted to GB /T9138-1988, JJG817-93 and JGJ/T23-2001 standards. The instrument is useful for quality Inspection Company, site testing or sampling and laboratory center, don’t have to manual calculation, machine automatically compute,

Brand Name:SANROCK

Model Number:DHD360 -178mm

Place of Origin:Zhejiang, China

... rates and extended service life in hard and abrasive formations.Interchangeable Compatibility: Designed to work seamlessly with standard 6-inch DTH hammers and drilling assemblies. Applications: Blast hole drilling in open-pit and underground mining

Brand Name:JCDRILL

Model Number:All Models

Place of Origin:China (Mainland)

... durability and wear characteristics. Specific heat treatment standards and special “stress relief” processes ensure consistent performance. DTH hammer bits are designed for maximum performance and hole cleaning ability and high penetration rate. We

Brand Name:CHENGFENG

Model Number:CF9028

Place of Origin:China

...impact resistance and penetration resistance of safety helmets. An aluminum human head model wearing a safety helmet is placed on a highly sensitive force sensor, and then a 5kg steel hammer is used to impact from a height of 1m. The force value at the

Brand Name:Raytech

Model Number:HT-225V

Place of Origin:China

.... The instrument is useful for quality Inspection Company, site testing or sampling and laboratory center, don’t have to manual calculation, machine automatically compute, grade and printing. Traits: 1)The test hammer is combined with displayer part,