socket weld reducing flange

Brand Name:ST

Model Number:Socket Weld Pipe Flanges037

Place of Origin:China

... Flange, Plate Flange, Orifice Flange, Spectacle Flange, Figure 8 Flange, Paddle Blank, Paddle Spacer, Anchor Flange, Single Blind, Ring Spacer, Reducing Socket Weld flange, Reducing Weld Neck flange, Long Weld Neck Flange SAE Flanges, Hydraulic Flanges,

Brand Name:HH Socket Weld Pipe Flanges

Model Number:DN15-DN1200 Socket Weld Pipe Flanges

Place of Origin:Hebei, China

...SOCKET WELDING FLANGE A105 6" SS Socket-weld pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This Socket weld flanges are typically used on smaller sizes of high-pressure pipes. These allow for a smooth bore and better flow of the fluid or gas inside of the pipe. Product Name CARBON STEEL ANSI B16.5 CLASS 150 SOCKET WELDING FLANGE A105 6" Types Socket

Brand Name:BOYUE

Model Number:32750(2507)

Place of Origin:CHINA

... is counter-bored to accept pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The positive of this is that is creates a smooth bore with the proper welding and grinding. The negative of this type of

Place of Origin:cn

Brand Name:aw

Model Number:sw socket welding neck flange

...socket welding neck flange FLANGEWN(welding-neck);SO(slip-on);PL(Plate);BL(Blind);Th(Threaded);SW(socket welding);LF/SE(lapped flange/stub end);LWN(long welding neck);Orifice flange;Reducing flange;API flange;Integral/Compact flange;Spectacle blind,Lind spade and spacer,Paddle blind,Paddle spacer;Orifice plate;tube plate, tube sheet, Bleed ring, square flange, girth flange, hub flange, API flange...

Brand Name:DEYE

Model Number:PF-FL-SW05

Place of Origin:CHINA

...Socket Welded SW Flange With Pressure 150# 300# 600# 900# Socket Weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges. Size Range moslty≤3 ", The main use of socket welded flange is to connect pumps, pipes, valves, and other equipment to make a pipework system. Usually, SW flanges

Brand Name:TOBO

Model Number:F321

Place of Origin:CHINA

...Socket Weld Raised Face Forged Flange ASME B16.48 PRODUCT CATEGORIE Lap-Joint Flange(LAJ) Blind Flange(BL) Thraded Flange(TH) Spectacle Blind Figure 8 Blanks Flange Reducing Flange Slip On Welding Flange(SO) Sockt Welding Flange(SW) Welding Neck Flange(WN) Long Welding Neck Flange(LWN) Spectacle blinds Lap-Joint Flange(LAJ) Blind Flange(BL) Thraded Flange(TH) Reducing Flange...

Brand Name:YUHONG

Model Number:ASTM A182 F53

Place of Origin:China , USA, UK

ASTM A182 F53 UNS S32750 1.4410 Super Duplex Stainless Steel Socket Weld RF Flange With Flange Water Line Super duplex stainless steel socket weld flange, specifically designed for harsh environments requiring high corrosion and strength, such as marine ...

Brand Name:ZZ

Model Number:ASTM A350 LF2

Place of Origin:CHINA

... supplies Socket Weld Reducing Tee 2"x1" 3000# ASTM A350 LF2 ASME B16.11 for Egypt in good quality. Socket Weld Type Fittings 90 Degree and 45 Degree Elbow Straight and Reducing Tee, Cross Socket Weld Cap, Union, Lateral Full and Half Coupling Straight and

Brand Name:QD

Model Number:ANSI, ASTM DIN EN BS JIS GOST etc.

Place of Origin:CHINA

... for high temperature and high pressure positions. According to the standard of chemical industry. flat welding flange not only saves space, reduce the weight, more important is to ensure that the joint parts will not leak has good sealing performance.

Place of Origin:Xi'an, Shaanxi Province, China

Brand Name:PeterTrade(PT)

...Socket Weld Flanges SWRF Class 150 for Industrial Applications Introduction: Our company, Shaanxi Peter International Trade Co., Ltd., is a renowned and reputable supplier in the market. With a strong business background over 20 years, we have established ourselves as a trusted source for ANSI/ASME B16.5 carbon steel socket weld flanges...

Brand Name:TORICH

Model Number:ANSI/ASME B16.5

Place of Origin:CHINA

...Socket Welding Flange Socket weld flange is similar to the slip-on flange in outline, but the bore is counter-bored to accept pipe. Socket welding pipe flanges are typically used on smaller sizes of high pressure pipes. Socket weld flanges are widely used in high pressure systems such as hydraulic equipment and steam lines. Socket weld pipe flanges are attached by inserting the pipe into the socket...

Brand Name:HT

Model Number:AISI SUS 310 310S

Place of Origin:China

... flange. OD 15mm-6000mm Pressure 150#-2500#,PN0.6-PN400,5K-40K,API 2000-15000 Standard ANSI ...

Brand Name:ZeXu

Model Number:1/2'' ~ 24''

Place of Origin:Hebei,China

...Socket Welding Flange ASME B16.5 Forged Flange Flanges are also called flange flanges or flanges. Flange is a part that connects pipes to each other and is used for the connection between pipe ends; it is also useful for flanges on the inlet and outlet of equipment to connect two equipment, such as reducer flanges. Flange connection or flange joint refers to a detachable connection in which flanges...

Brand Name:TOBO/ METAL

Model Number:Flange

Place of Origin:China

Socket Weld Rf Flange C70600 2-1/2' 300# RF ASTM A105 ASME16.9 Welding Pipes Flanges Cooper Nickel Steel Flanges Product Description Usage: Joint Pipe Fittings Copper Nickel Flanges Specifications and Standards Specifications Copper Nickel Flanges - ASTM B151 / ASME SB151 Grades Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 ASME B16.5 Copper Nickel Flanges...

Brand Name:TOBO

Model Number:CuNI 90/10 copper flange

Place of Origin:China

... Connection: Male Shape: Equal Head Code: Round material: copper nickel Name: CuNi 90/10 C70600 butt weld concentric reducer 1.1.1 Packaging & Delivery Packaging Details: wooden case, pallet or as customers'

Brand Name:YiHang

Model Number:1/2"-60"

Place of Origin:China

...Flange Customized Super Large Socket Weld Flange Product Description: Nickel Base Flange Customized Super Large Socket Weld Flange Name: alloy flange / NO8800 flange Material: NO8800/ NO8810 / NO8825 / NO6600 Standard: JIS/ ANSI /DIN /GB Item: PL/ WN /SO /BL Size: 1/4"-100" / Customize Specificaton: with production line ,we can spply good quality and big quantity NO8800 / NO8810 / NO8825 / NO6600 flanges...

Brand Name:XF

Model Number:1/2"-60"

Place of Origin:CHINA

...FLANGE ASME B16.5 &ASME B16.47 ASME B16.5 &ASME B16.47 Class 150#,300#,600#,900#,1500#,2500# Welding Neck , Slip On , Blind , Socket Welding, Lap jont Material: Carbon Steel and Stainless Steel Produce Method: Forged Flange Type:Welding Neck , Slip On , Blind , Socket Welding, Lap jont and Threaded Flange...

Brand Name:NYHAU

Place of Origin:KunShan,China

...m PN10 to PN200, the materials include stainless steel ,alloy steel, nickel based alloy, titanium alloy etc. All of our flanges can be supplied upon EN10204 3.1 /EN10204 3.2 etc. Stainless Steel WELD NECK Flanges Meterial Grade: 201, 202, 301, 304, 304L,

Brand Name:KASUGAI

Model Number:ASTM B151 C71500 ANSI B16.5

Place of Origin:CHINA

...Flange Product Information Product Name ASTM B151 C71500 ANSI B16.5 (70/30)Copper-Nickle Flange Size Range 1/2” to 24” Flange Type Weld Neck (WN), Slip On (S), Socket Weld (SW), Threaded (TR), Blind (BL) Specifications ANSI B16.5 EEMUA145 DIN 2632/2633/86033/86036/86037 Pressure Class 150 300 Thickness Sch5S Sch10S Sch40S Sch80S Copper Nickel Flanges Copper Nickel Flanges...

Brand Name:JUNXI

Model Number:GIL114

Place of Origin:Cangzhou

..., DIN, ASME, GOST33259 Material: F304 F304L F316 F316L 31803 32750 347H Product name: Stainless Steel Flange Application: Connection Size: DN10-DN800 Packing: Plywood case/Pallets Flange Type: Threaded Flange BLD flange Etc Certificate: ISO PED Standard or