silicon steel strip automatic core cutter

Brand Name:STT

Model Number:ZZ300

Place of Origin:China

...cutting silicon steel strip, which can be used to make center leg for transformer core. The core cutting machine can cut the silicon steel with thickness from 0.2mm to 0.35mm. The maximum width of the silicon steel strip is 300mm. The material coil’s

Brand Name:Zhutang

Model Number:ZJX1250

Place of Origin:China

..., which is mainly used to cut the coils of silicon steel strip into a certain width of the silicon steel strip, and then wind into the productive and processing equipment according to a certain number of curly tension. It is widely used in food, packaging,

Place of Origin:JiangSu,China

Brand Name:HengTong

Model Number:Customer settings

... steel is widely used for kitchenware, stainless steel pipes, and electric appliances Packing: Strong export packing,package in wooden case Magnetic Properties The magnetic properties of the product is featured by its low core loss, high permeability and

Brand Name:Gnee

Model Number:Cold Rolled Electrical Steel Coil

Place of Origin:Henan

Silicon Steel Electrical Steel Strip Transformer Core Steel Coil 15mm-520mm 1 - 10 Mm Cold Rolled 30Q130,30Q130 30Q130 Silicon steel is a silicon iron alloy with a silicon content of 3%~ 5%.Divided into oriented silicon steel and non-oriented silicon steel, it is an important soft magnetic alloy which is indispensable for power, electron and military industry.Was once known as "the arts and crafts of steel...

Brand Name:CENTERSKY

Model Number:3PEI 20---3PEI 120

Place of Origin:JIANGYIN

.... EI-100 (EI-76.2) one inch silicon steel ei transformer lamination core Three-phase EI core is made by the silicon steel strip. The model of EI lamination in standard sizes is from 3PEI-17.5 to 3PEI-120.The gap sizes of the transformer lamination core can

Brand Name:LIANGUI

Model Number:LG2-24A

Place of Origin:CHINA

Automatic chip inserting machine for silicon steel sheet magnetic core transformers used in the electronics industry Product description: The semi-automatic transformer inserting machine is an improved product developed on the basis of the "hand-operated inserting machine". The new product is an automatic equipment for inserting the "EI" slices of small transformers. The rubber core and The single machine capacity of silicon

Brand Name:AUTOFOR

Model Number:BYT

Place of Origin:China

high performence waterjet cutting machine for ferrite BYT is developed for cutting ferrite rings,ferrie cores,ferrite magnets,ferrite choke and ceramic ferrite. AUTOFOR ferrite cutting machine solves the problem that the ferrite cutting can't solve in a ...

Place of Origin:Jiangsu,China

...Steel (NOES) Coil/Strip Electrical steel, also called lamination steel, silicon electrical steel, silicon steel or transformer steel, is specialty steel tailored to produce certain magnetic properties, such as a small hysteresis area (small energy dissipation per cycle, or low core...

Place of Origin:Shandong, China

Brand Name:Zhongsheng

#detail_decorate_root .magic-0{margin-bottom:10px;overflow:hidden}#detail_decorate_root .magic-1{vertical-align:top}#detail_decorate_root .magic-2{padding:0;margin:0;color:#333;font-size:14px;padding-left:4px;font-weight:bold;white-space:pre-wrap}#...

Brand Name:WKH

Model Number:N/A

Place of Origin:China

Silicon Steel Lamination Cut to Length Machine for Steel Strip Cutter Description: The kind of steel coil cut-to length/shearing line is specifically for metal coil after uncoiling,leveling, fixed length, cutting into required length plate and stacking.It is suitable for processing of cold-rolled and hot-rolled carbon steel, silicon steel, tinplate, stainless steel and various metal materials after coated zinc on surface.steel...

Brand Name:Jinqiu

Model Number:ZJX-1250

Place of Origin:China-Wuxi Jinqiu Machinery Co.,ltd

... and supporting, vertical shearing and straining. This equipment is running under the international advanced drawing and shearing technique, supplied with sintered carbide hobbing cutter, and automatic controlled by PLC,

Brand Name:TISCO

Model Number:BJCS44

Place of Origin:China

... the deformed and annealed steel sheet, its grains are distributed randomly. The silicon content of the alloy is 1.5% to 3.0%, or the sum of the silicon and aluminum content is 1.8% to 4.0%. The products are usually cold-rolled plates or strips, which are

Brand Name:CHENXIN

Model Number:CX-DG220

Place of Origin:CHINA

...Core Cable Automatic Parallel Cable Wire Cutting And Stripping Machine Technical parameter: Cutting length 1.0-9,999.9mm Stripping length 1.0-10mm according to the wire Capacity 1,000-2,000pcs/hr Blade material tungsten steel/ high-speed steel Speed to adjustment 0-9 Driving mode 4 wheel driving Applicable wire AWG#28-AWG#14, flat cable 2P-13P Stripping mode flat cable/long cable/short cable/half-stripping/segment stripping

Brand Name:Baosteel

Model Number:30Q220 30Z120

Place of Origin:CHINA

...steel strips 0.30mm for electric reactor silicon steel Electrical steel, also known as silicon steel sheet, is an important soft magnetic alloy indispensable to power, electronics and military industry, as well as the largest output of metal functional materials, mainly used as the iron core...

Place of Origin:China

Brand Name:Juanxin

Model Number:JX-B06

.... The wire'scross-sectionalareashould be within0.1-4.5mm2(AWG12#-AWG32#). The wire cut length is 1-9999mm. Parameters Wire range Single core with single or multiple strands / Flexible or rigid Suitable wire gauge 0.1

Place of Origin:China

Brand Name:MAZS

Model Number:Steel Coil Slitting Machine

...Steel Strip Slitting Machine is an advanced metal strip cutter for steel strips, providing customized cutting width and blade diameter. It features an automatic tension control and PLC control system for efficient operation. With our slitting machine, you can easily and accurately cut metal strips of different sizes and shapes in a fast and efficient manner. Our Steel Strip Slitting Machine is ideal for cutting steel

Brand Name:RKENS

Model Number:RS-360

Place of Origin:china

Automatic Wire Cut-to-length And Stripping Machines For Multi-Core Cables Intro: Automatic and precise cutting machine for processing of muli-core cables and single core electric wire. According to your cable diameter and strip length, we have suitable ...

Brand Name:ZXY

Model Number:ZXY-C40W

Place of Origin:China,shenzhen city.

...Silicon Steel Toroidal Power Transformer For Power Supply 1.Product Descriptions: 1. Structural features Core shape: The toroidal core is wound from silicon steel strip, and the closed loop design reduces the air gap in the magnetic circuit and improves the magnetic permeability. Winding method: The windings are evenly distributed on the core...

Model Number:CL-300

Place of Origin:China

Brand Name:Vranke

... for the production of power and distribution transformer cores. It excels in rapidly and accurately processing both equal-side center column and eccentric center column core designs, ensuring consistent quality and dimensional accuracy essential for

Brand Name:METS

Place of Origin:XIAMEN.CHINA

... other ways of modifying metal raw material, combined with an automatic feeding system. The feeding system pushes a strip of metal (as it unrolls from a coil) through all of the stations of a progressive stamping die. Each station performs one or more