repeatable material testing equipment

Brand Name:HBYIQI

Model Number:HB-TQY-01

Place of Origin:China

...Materials Testing Equipment Gas Transmission Rate Tester Lithium-ion Separator Brand: HBYIQI Equipment Name: Gas Transmission Rate Tester Standard basis: GB/T 36363-2018 Polyolefin Separator for Lithium-ion Batteries Application: Gas transmission rate tester is suitable for testing the air permeability of lithium battery separators. Under a constant pressure differential of 1.21 kPa, it tests...

Brand Name:LIYI

Model Number:LY-6010

Place of Origin:China

... tests deriecting at adhesive force. Auto-recording the time which the tape hold under some weight to confirm the limitation of adhesive tape. Place 1 inch ...

Brand Name:Gaoxin

Model Number:GX-8004

Place of Origin:China

Micro Computer Material Testing Equipment Leather Tearing Strength Top Seller And Testing Used 1. Model: GX-8004 (Micro-computer Type) 2. Test standard: ASTM D4704-2013 ,ASTM D4705-2013 ,ASTM D6075-2013 ,ASTM D6077-2010 ,DIN EN 12995-1997 ,NF G52-014-2003...

Brand Name:DAXIAN

Model Number:DX8617

Place of Origin:China

...Test Device , Clothing Flame Resistant Materials Test Equipment 1.TPP Test Device Product introduction: The TPP Thermal Protective Performance tester is used to measure the insulation performance of flame-resistant protective clothing fabrics exposed to radiant heat sources and convective heat sources. It is used to test...

Brand Name:Infinity Machine

Model Number:RS-8223A

Place of Origin:Made in China

...Material Testing Equipment Coated Specimen Reliability Test Model: RS-8223A Application: This machine is applicable to impulse test of material test block as plastic, PVC and coating test block, put coating of test block upward and under ram of the machine and check damage and transformation condition after heavy punch falling and strike of a certain height. Test...

Brand Name:Haida

Model Number:HD-B617

Place of Origin:China

... Tester is mainly used in testing the nonmetal materials' impact toughness, such as horniness plastic, strong nylon, glass reinforced plastics, china, clay rock,anti-electric and metal materials. They can do Charpy, Izod, tensile impact, Charpy & Izod,

Brand Name:HongCe

Model Number:HDX1301

Place of Origin:China

... 100~1000mm Material Aluminum alloy base plate, copper clamp Dimensions 1530 × 210 × 150mm Adapting electrical bridge QJ84 double ...

Brand Name:Haida

Model Number:HD-YGB021B

Place of Origin:Guangdong, China (Mainland)

Textile Testing Machine Electronic Portable Fabric / Textile Seam Fatigue Testing Machine Description Of Goods: Applicable Range Used for testing the oversew strength of surface mateirals for car seats. Relevant Standards JASO M403 Technical Parameters: ...

Brand Name:Great Win

Model Number:GW-001B

Place of Origin:CHINA

...material flexing testing machine/Equipment (GW-001B) •Brief introduction: It is used to assess the tendency of all type of shoe upper materials such as leather, fabrics, plastic-coated fabrics and upholstery coverings to crack or break as a result of flexing in wear. It allows 4 samples to be tested simultaneously. GW-001B Upper material flexing testing machine.pdf... •Technical Specifications: Model GW-001B Upper material flexing testing

Brand Name:Sinuo

Model Number:SN882B

Place of Origin:China

ISO4892-3 Chamber Type UV Aging Chamber Environmental Test Chamber Complied Standards & Clauses Conforms to ISO 11507, ISO4892-3, ASTM G154, ASTM G153, ASTM4329, IEC 61215, etc. Equipment Overview This product uses fluorescent ultraviolet lamps that can ...

Brand Name:HOOHA

Model Number:ZY6017D

Place of Origin:China

...material incombustibility testing machine Scope of application: The 2016 zy6017d-pc building material incombustible testing machine is developed according to the technical specifications and requirements set out in GB/t5464-2010, and it is applicable to the test method to evaluate the combustion performance of building materials under laboratory conditions. It is applicable to test...

Brand Name:KINSGEO

Model Number:KJ-1065A-H

Place of Origin:China

Uses: This machine is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling on metals, tape, composites, alloys, rigid plastics and films, elastomers, textiles, paper, board and finished products. Design ...

Brand Name:WUWAY

Model Number:WW-CA9001

Place of Origin:China

Description: It is mainly used to detemine the abrasion resistance of the coating surface and green sand. If the sand type and the coating have poor wear resistance, not only the boundary affects the roughness of the surface, but also defects such as sand...

Brand Name:Lixian

Model Number:HZ-1729

Place of Origin:China

... foam sample after the rated load (750 N) repeated indentation (80000 times) after the fatigue performance of equipment. To meet the standard: Compliance with international standards ISO 3385:2014 "Flexible cellular polymeric materials — Determination of

Brand Name:Dongjun

Model Number:DJ-ET009

Place of Origin:Dongguan, China

...testing equipment Product use Baby Carrier Bite Force Testing Equipment is a professional device used to test the bite resistance, safety and material durability of baby carrier components, including straps, buckles, plastic parts, fabrics and accessories. It uses a simulated bite mechanism to apply controllable, repeated and standard bite force on samples according to set pressure, frequency and test...

Brand Name:HTI

Model Number:TNJ-028

Place of Origin:Guangdong,China(Mainland)

...Repeated Indentation Fatigue Test Equipment Furniture Testing Machines Description: This tester is used to test the reduction of thickness and hardness values of porous elastic material that is used for interior decoration. Put a square specimen into the tester. Sunk into the sample repeatedly...

Brand Name:LABTONE

Model Number:SKM500

Place of Origin:CHINA

...Repeat Shock Testing Bump Test Machine For Home Appliances Product Description Excellent Durability Repetitive Mechanical Bump Testing Equipment product is suitable for components, equipment and other electronic electrician products during transport or using which may be subjected to repeated shocks. Bump testing...

Brand Name:KRE

Model Number:KE8101

Place of Origin:China

...test equipment is used for the test of various single phase electric and mechanical meter, multi-function meter, PLC meter, multi-rate meter and prepayment meter. Main functions: Base error test Forward / reverse active energy error test Forward / reverse reactive energy error test Creeping test (no load test) Starting test Verification of constant Dial test (energy accumulation test) Error repeatability test...

Brand Name:Btutest

Model Number:MDJ-300A\ MDJ-200S

Place of Origin:Made in China

...Testing Equipment Description: Liquid densitometer imported from Germany HBM sensor, with reliable measurement repeatability, two operation steps that show the density, no wechsler balance, gravity bottle method cumbersome debugging and operation, excellent performance, strong practicality, stron Drilling Fluids Testing Equipment...