pull method adhesion tester

Brand Name:HUATEC

Model Number:HKSM-1

... plating, concrete and other material coatings. The working principle of the instrument is to use the hydraulic system to measure the adhesion of the coating of a certain diameter on the surface of the matrix. The multifunctional digital display of the

Brand Name:LONROY

Place of Origin:Guangdong, China

.... In practice, three different test procedures are used to assess the resistance of paints and coatings to separation from substrates: Cross-Cut Test This test method specifies a procedure for assessing the resistance of paints and

Brand Name:SAMYON

Model Number:SY-M

Place of Origin:CN

...Pull Off Adhesion Tester With Four Different Sizes Dolly SY-M 10KN Digital Pull-off Adhesion Tester Application: It is used to test the pull-off adhesion strength of the coating on steel surface, concrete surface or other material’s surface. Standard: ISO 4624 Paints and varnishes - Pull-off test for adhesion ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers...

Brand Name:iqualitrol

Model Number:BGD-500

... which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating’s strength of adhesion to the substrate.

Brand Name:Btutest

Model Number:BTU-POATA

Place of Origin:Made in China

Pull Off Adhesion Tester Automatic Paint Testing Equipment Standard: GB/T 5210,ASTM D4541/D7234,ISO 4624/16276-1 Features: ◆ portable design, built-in rechargeable lithium battery, no external power supply, suitable for field and laboratory use ◆ it is the first in China to test the adhesion between the coating and the substrate automatically by drawing method...

Brand Name:TMTeck

Model Number:TP55

Place of Origin:China

In order to perform satisfactorily, coatings must adhere to the substrates on which they are applied. There are three different adhesion test procedures to assess the resistance of paints to separate from the substrate. The cross cut test, also described...

Brand Name:AISRY

Model Number:ASR-5604C

Place of Origin:China

...Adhesive Tape Tester Test principle: Test board with adhesive tape vertically hang on the test rack, and hang stipulate weight of weights at end, arrording to the displacement of the sample after a certain time or the time of complete departure of the sample To test the ability of adhesive specimen to resist pulling. Design Standard: 1. GB 4851 pressure sensitive adhesive tape holds the viscosity test method...

Brand Name:Shandong Shengtai Instrument

Model Number:ST106

Place of Origin:CHINA

...adhesion tester The ST106 initial adhesion tester, also known as the initial adhesion tester or tape adhesion tester, is designed and manufactured according to the requirements of the new version 2025 of the Chinese Pharmacopoeia "0952 Adhesion Determination Method - First Method - Determination of Initial Adhesion". The equipment adopts the inclined rolling ball method, which tests the initial adhesion...

Brand Name:KINSGEO

Model Number:KJ-1066-5

Place of Origin:China

Computer software controls the form recording Pull Off Adhesion Peel Force Wire Tensile Strength Tester Uses This machine also known as a materials testing machine , is applicable to testing tensile, compression,bending,peel, shearing force, peeling ...

Brand Name:Shengtai Instrument

Model Number:ST106

Place of Origin:China

... or tape adhesion tester, is designed and manufactured in accordance with the requirements of the new version of the 2020 Chinese Pharmacopoeia "0952 Adhesion Force Determination Method". The equipment adopts the inclined rolling ball method.

Brand Name:POOTAB , PERFECT

Model Number:PT-6030

Place of Origin:Dongguan, Guangdong, China

..., ( normal use 30°) Rolling ball Steel, from 1/32” ~ 1” Weight 500g Run-up segment 100mm Principle : Definition: Initial adhesion: Objects and pressure-sensitive adhesive tape with small pressure brief contact between the

Brand Name:LIYI

Model Number:LY-6019

Place of Origin:China

... raw materials: Base material: pet, BOPP, PP, paper, etc Glue: oily, water-based glue, etc Main coating methods:Direct scraping coating. Mechanical specification: L* W * H(about 5800 * 1500 * 2650 (mm)

Brand Name:HongCe

Model Number:HC9916

Place of Origin:China

... and minimum withdraw force to pullout a plug or plug pin from socket in the standard range. The structure of electrical accessories should be easy to insert and pull out the plug, and should

Brand Name:SKYLINE

Model Number:SL-T14

Place of Origin:CHINA

... Test (Brookfield Viscometer Method)” in the Industry Standard of People’s Republic of China JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. It is suitable to determine absolute viscosity of

Brand Name:UNITED WIN

Model Number:UW-6098

Place of Origin:China

Loop Tack Testing Machine Primary Adhesion Tester Descripition: The loop tack tester is mainly used for the initial adhesion of various kinds of tapes, adhesives and other products. It is to separate the annular sample and the test board at a constant ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-C525-1

...product similar to the pressure sensitive adhesive tape products. Definition: Initial adhesion——Objects and pressure-sensitive adhesive tape with small pressure brief contact between the cohesive surface, the adhesion of adhesive tape that effect on

Brand Name:CX

Model Number:CX-25S

Place of Origin:China

Arbor Valve Manual Control Pressure Pull Force Spring Tester Feature Multiple Collocation Options The test bench is compatible with diverse tension Meter. Double Guide Rod Structure Double ...

Brand Name:Daxian

Model Number:DX8218

Place of Origin:China

GB19083-2010 Mask Adhesion Tester Use: Special test for the tightness of masks and respirators. Standards: BS EN 136-1998 : Respiratory protective devices — Full ...

Brand Name:PEGO GROUP

Model Number:PG-PCT1

Place of Origin:China

IEC61010-1 Clause 10.2.2 Electrical Testing Equipment Cord Anchorage Push-pull and Torque Tester 1. Introduction The electrical testing equipment, named Power Cord Push-Pull and Torque tester, is designed and manufactured according to the requirements of ...