printed wireless module for patch antenna

Place of Origin:CN

Brand Name:Original Factory

Model Number:LC86GLAMD

Wireless Communication Module LC86GLAMD Compact GNSS Module Integrating Patch Antenna [MJD Advantage] + 15 years experience for electronic components + Secure Ordering + Excellent Feedback + Delivery Date Guaranteed + 100% ...

Brand Name:Bicheng

Model Number:BIC-041.V1.0

Place of Origin:CHINA

Rogers PCB Made on RO3035 10mil 0.254mm DK3.5 with Immersion Gold for Patch Antenna for Wireless Communications (Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference) Rogers RO3035 high frequency circuit ...

Brand Name:TOP

Model Number:TOP-GSM08

Place of Origin:Shen Zhen,Guang dondg,China

Internal PCB Patch /andnbsp; Chip GSM GPRS Antenna for Mobile Broadband Modules andnbsp; andnbsp; Antenna Introduction: andnbsp; Internal LTE//UMTS/GSM/BT/WiFi Antenna with horizontal polarization and support for most GSM/UMTS frequencies as well as ...

Brand Name:OEM

Model Number:OKY3362-3

Place of Origin:Guangdong China (Mainland)

...Antenna 1100m GT-24 2.4G NRF24L01+PA+LNA Wireless Module Description: *Operating frequency band: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step) *Interface mode: 1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line) *Supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged) *Communication level : 0.7VCC ~3.3V (VCC refers to the module...

Brand Name:CANYI

Model Number:TX-03

Place of Origin:China

11:30:20 LET YOU HAVE A CLEARER UNDETSTANDING OF THE PRODUCT INFORMATION Instructions for the Use of Products o The VCC voltage should be consistent with the working voltage of the module,and the power filter should be done well 0 The antenna has a great ...

Place of Origin:China

Brand Name:SMG

Model Number:SMG-H012

1. Product Description Battery model 27A Operation voltage DC12V Standby current less 2uA Operation frequency 433.92MHz Frequency offset +/- 75KHz Modulation ASK (Crystal Oscillator ) Transmission current less 10mA Transmission power 10dBm Encoder(Optional...

Brand Name:RY

Model Number:RY-S022

Place of Origin:China

... used to connect a Printed Circuit Board (PCBs) to other PCBs but can also be used for I/O connections and to connect external antennas to wireless modules. Electrical Characteristics: RF Cable Assembly/Jumper/Interface Cable Specification Connector 1

Model Number:ESP32

..., and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and chips by TSMC 40nm low power ...