pneumatic air feeder 48 strokes min

Brand Name:DURA

Model Number:AF-1C~14C

Place of Origin:Jiangsu, China

High Speed Air Pneumatic Feeder Air feeder 1. Type: Standard type 2. Feeding material: metal, tape, plastic 3. Special attachment: over AF-3C with buffer. Air feeders, as a kind of automatic feeding device, are driven with compressed air. They are widely ...

Brand Name:AIRSUSTECH

Model Number:2B4.5×2P

Place of Origin:Guangzhou, China

...Stroke 85MM Air Spring Actuator Norgren PM/31042 Pneumatic Air Suspension The Specifications of AIRSUSTECH 2B4.5×2P [1] Min. compressed height: 65 mm [2] Maximum height: 150 mm [3] Working stroke: 85 mm [4] Port size: G3/8 [5] Threaded hole type: 3×M6 [6] Cover plate diameter: 110 mm [7] Maximum diameter of rubber bellows: 125 mm [8] Installation space: 140 mm [9] Center distance diameter: 93 mm The Technical Parameters of 2B4.5×2P Air

Brand Name:NBSANMINSE

Model Number:CXSJ

Place of Origin:China

...Pneumatic Cylinder SMC Similar Type Specifications Bore Size (mm) 6 10 15 20 25 32 Fluid Air ( Non – lube ) Proof Pressure 1.05 MPa Max pressure 0.7 MPa Min pressure 0.15MPa 0.1MPa 0.05MPa Ambient and fluid temperature - 10 to 60 ℃ ( No freezing ) Piston Speed 30 to 800 mm / s 30 to 700 mm / s 30 to 600 mm / s Cushion Rubber bumper on both ends Stroke...

Model Number:3.8m3/min Refrigerated air dryer for

Place of Origin:CHINA

Brand Name:QINGDAO FUTAI

Air Compressed Air Treatment 3.8m3/min Refrigerated Air Dryer Moisture creation in a compressor is unavoidable, but if properly treated, it will prevent damage to pneumatic machinery, air motors, valves and any other components, as well as avoid possible ...

Brand Name:RONGYAO

Model Number:utility vehicle atv200cc22

Place of Origin:China

... Transmission: Chain Drive Engine Gear: D-N-R Shift Gear: Hand Max Torque: 10.2N.m/5000-5500r/min Wheelbase(inch): 48 Ignition: CDI Fuel Capacity: 5.0L (1.3 Gallon) CHASSIS: Front Hand Brake: Hydraulic Disc Rear Foot Brake:

Brand Name:LIKEE

Model Number:LK-T80

Place of Origin:CHINA

... control panel&PLC. 4. 80tons Yangli brand H frame pneumatic press. 5. Mould. 6. Auto-stacker with1-5 lanes(optional). 7. scrap aspirator & press machine. Basic Specification Pressure 80Ton ...

Place of Origin:Shanghai, China

Brand Name:AA4C

Model Number:AA-MCL200

Motorcycle lifting table AA-MCL200 Max capacity: 450KG max lifting height:845mm Min height:190mm Air pressure:8-10KG/cm Operation mode: Pedal, Pneumatic Mainbody 2040*680*370KG, 197/220KG Lateral widen plates 2040*300*330MM 56.6/70.6KG Related Products ...

Brand Name:FLY

Model Number:CY1R50H-300

Place of Origin:CHINA

...Pneumatic Air Cylinder Specifications Fluid Air Proof pressure 1.05MPa Max. operating pressure 0.7MPa Min. operating pressure 0.18MPa Ambient & fluid temperature -10 to 60℃ Piston speed (1) 50 to 500mm/s Cushion Rubber bumpers at both ends Lubrication Non-lube Mounting method Direct mounted style Standard Stroke Bore size (mm) Standard stroke (mm) Max. available stroke (mm) Max. stroke

Brand Name:Brando

Place of Origin:China

... 1.0Mpa Speed Range(mm/sec) 50-700 50-500 Temperature Range -10 to 60 ℃ Working Medium air Need Oil or Not No Buffer Adjustable Buffer Stroke 20 25 20 The Min Stroke (mm)

Brand Name:RUIHUI

Place of Origin:Guangdong, China (Mainland)

...feeder, hardware fittings stamping processing Stamping production is developing in the direction of high speed and high precision. There are more and more occasions for high-speed punching in stamping production. The maximum stroke of high-speed punching machine can reach 1200 times/min. At this time, if the traditional air feeder, roller feeder, and NC feeder...

Brand Name:HAIDA

Model Number:HD-P839-1

Place of Origin:Guangdong, China (Mainland)

...Pneumatic Cylinder Stroke Automatic Sample Cutter 50~60HZ Application Pneumatic sample cutter is used to cut many kinds of sample and it is suitable for lab to cut rubber, plastic, leather and so on. Pneumatic sample cutter adopts pneumatic method to offer required pressure to cut all kinds of sample Specifications Item Specifications Capacity 1T Pressure source Air pressure more than Min.5kg/cm2 Pneumatic cylinder stroke...

Brand Name:SHANGHAI ZHULI

Model Number:ZL-T80

Place of Origin:CHINA

...Air compressor. 2. Automatic decoiler&feeder head. 3. Mitsubishi brand control panel&PLC. 4. 80tons Yangli brand H frame pneumatic press. 5. Mould. 6. Auto-stacker with1-5 lanes(optional). 7. scrap aspirator & press machine. Model ZL-T80 Stroke 180-260mm Working Speed 40~68strokes/min Raw material Alloy 8 Series & 3 Series Aluminum foil thickness 0.035mm~0.250mm Compressed air

Brand Name:GUOMAT

Model Number:4 1/2 X2

Place of Origin:Guangdong, China

...Air Spring Double Convoluted Pneumatic Accessory 4 ½ x2 Air Spring Information Body Dia.[Max]: 125 mm Compressed Height: 65 mm Temperature Range [Min]: -30℃ Air Inlet Type: Imperial Stroke Length [Max]: 80mm Pressure [Max]: 0-8 bar Height [Max]: 145 mm Height [Min]: 65 mm Air...

Brand Name:DONJOY

Model Number:C-TOP-1421/1721

Place of Origin:CHINA

...pneumatic control valve open and close SPECIFICATION Product Name Controller Medium Lubricated compressed air, inert gases Max. Working temperature 70℃ Working pressure 1.5 bar - 7 bar (22PSI to 102PSI) Connector G1/8" Level of protection IP67 Air flow 200NL Stroke Min...

Brand Name:NODHA

Model Number:AODP-168

Place of Origin:WUXI

...pneumatic pipe cutting beveling machine Split Frame Cold Cutting/Beveling improve safety Cut or Cut/Bevel simultaneous Low Axial & Radial Clearance Tool feed automatically Easy install & Operation Pneumatic, Electric and Hydraulic type for option Machining OD of pipe from 2” up to 48” Specification of pneumatic pipe cutting beveling machine Driven options: Pneumatic, Hydraulic or Electric Air requirement: 1500L-3000L/Min...

Place of Origin:China

Brand Name:RZX

Model Number:LM-416

Pneumatic Computer Wire Stripping Machine LM-416 Features: 1.Unique sliding mechanic design, good for operation. 2.Double motion cylinder. 3.Deluxe knife mold, suitable for all kinds of blades in our line. 4.Special sliding setting, stable running stroke, ...

Brand Name:SMTfly

Model Number:SMTfly-LT

Place of Origin:Dongguan City,Guangdong province,China

...-cut Remover​ Specifications: Action stroke times 12 times/min Working dry air pressure 0.50-0.70 Mpa Slide stroke 2 mm PCB Nibbler Machine Weight 2 kg PCB Nibbler Machine Size 280x105x185mm Off-cut Remover​ Features: 1, all pneumatic control, easy to

Brand Name:JINZHOU SHITAN

Model Number:Crawler Mounted Large Water Well Drilling Rig

Place of Origin:China

..., we have a look at his speed: the maximum rotation speed can reach 85-170r/ min, greatly improve the work efficiency, is a very hot water steam dual purpose drill.In the video, we add an automatic rod unloader to this ...