pin barrel cold feed rubber extruder

Brand Name:HHS

Model Number:XJ65-200

Place of Origin:Shandong, China

Pin Type Rubber Hose Production Line/Pin Barrel Cold Feed Rubber Extruder 1. Product Application Difference between pin extruder and exhaust extruder: 1. No vent on the barrel of the pin-type rubber extruder 2. The pin on the barrel of the rubber extruder can increase the pressure of the rubber extruder when the equipment is running Pin type rubber extruder is mostly used for rubber tube extrusion production, so we are also called rubber...

Brand Name:HC

Model Number:SKS

Place of Origin:Qingdao

...cold feeding extruder is used in China rubber industry in recent years. Compared with common cold feed rubber extruder. It has high production capacity, low rubber raw material temperature, low energy consumption, good mixing effect, even plasticizing. The machine is widely used in rubber hose, inner tube, rubber strip, inner linear, rubber seal strip etc. Extruding. Also can be used to supply rubber...

Place of Origin:Shandong, China

Brand Name:HUICAI

Customize OEM/ODM SERVICE WELCOME TO OUR FACTORY VIST AND NEGOTIATION The Extruder is consist of screw,machine barrel,headpiece,fixing patter device,pulling device ,cutting device,batching device and transmission device and control system, the headpiece...

Brand Name:SFC

Model Number:XJD-90 XJD-120 XJD-150 XJD-200 XJD-250

Place of Origin:China

... system, it enables cold feeding without pre-heating, delivers excellent plastication, uniform mixing, low temperature extrusion and high output. Key Features Multi-row pins enhance shearing & mixing, eliminate dead zones Cold feed design saves labor &

Brand Name:Beishun

Model Number:XJD-150×16D

Place of Origin:Qingdao

... in it. The bushing is tempered and surface nitrided. The surface hardness of the inner hole is HRC65-70, and the hard layer depth is 0.5-0.7mm. The outer barrel is drilled with an axial channel on the

Brand Name:junlin

Model Number:customized

Place of Origin:Qingdao, Shandong, China

Cold Feed Rubber Extruder For Rubber Processing Machinery Product Specifications Model XJ-60 XJ-65 XJ-85 XJ-90 XJ-115 XJ-120 XJ-150 XJ-200 XJ-250 Screw diameter(mm) 60 65 85 90 115 120 150 200 250 L/D ratio 4.5:1 4.5:1 4.8:1 4.8:1 4.8:1 4.8:1 6:1 4.6:1...

Brand Name:lianzhong

Model Number:lzrsb-140mm

Place of Origin:China

...360mm L/D=15-56 Length of screw and barrel/cylinder:8000mm According to different material and plastic products to design different screw structure ,compress rate and L/D! According to different material and plastic products to design different Barrel with

Brand Name:ZHITIAN

Model Number:65

Place of Origin:CHINA

Quick Details Product Name:65mm Feeder Barrel Of Twin Screw Extruder Parts 38CrMoAla Material Material: 38CrMoAla Color: Metal Packaging: Wooden Box Lead Time: 30-60 days Product Description We can satisfy your different material needs: According to ...

Place of Origin:China,shannxi

Brand Name:feed screw barrel

Model Number:feed screw barrel

Cold feeding screw and barreldescription Screw type [different plastic property, can choose different structure of the screw, more can improve the plasticizing effect] gradient type, mutation type, wave type, barrier type, double screen, FenLiuXing, ...

Brand Name:LDS

Model Number:LDS-LWM

Place of Origin:China

Water temperature controller for cold feeding exhaust type rubber extrusion(Extruder) Product Details Model : LWM Heating capacity: 6 ~24 KW Compressor power: 0.5 ~ 3HP Temperature Range: Cooling water~120℃ ...

Brand Name:MKPL

Model Number:Plastic Pelletizing Extruder

Place of Origin:China

Plastic Pelletizing Extruder A pla, alsplastic granula or plas, is specializedplastic recycling, polymer compounding, masterbatch production, biodegradable materials, and engineering plastics. W The extruder works by feeding raw materials into a heated ...

Model Number:ZSYJ

Place of Origin:Made in China

Product Description ZSYJ series gearbox for single screw extruder is a kind of special gear unit researched and developed by importing the most advanced technology of the hard tooth surface in the world. It has been widely used in the top and middle-grade ...

Brand Name:BLM

Model Number:standard or customized

Place of Origin:Jiangsu, China

Description The conical twin screw and barrel form the core of an extruder, expertly engineered for processing challenging materials like PVC and Wood-Plastic Composites (WPC). Its unique design, where the screw diameter decreases from the feed zone to ...

Brand Name:lixian

Model Number:HZ-7059

Place of Origin:China

Rubber Precision Preformer Barrel Inside Diameter 300mm Cutter Speed 35~300r/Min Single Feeding Volume 100L The Precision Preformer Equipment summary: The Precision Preformer is a type of rubber blank manufacturing equipment with high efficiency and high accuracy. This machine can process a wide range of rubber material, and is able to extrude rubber...

Brand Name:FLAME

Model Number:Plastic Strainer Extruder

Place of Origin:CHINA

... is composed of barrel screw, gear transmission system, measurable feeding, vacuum deareating, heating, cooling and electric control components ect. it is mainly used in plasticizing, extruding and forming of PVC pipes, plates, sheets, film , profiles,

Brand Name:Joful

Model Number:S-600/700/800/1000/1200/1500...

Place of Origin:CN

Single Shaft Shredder For wood block / Hard plastic / Scrap Plastic Lumps ,Wood block shredder Brief Introduction of Single Shaft For Wood Block Wood block crushing samples via single shaft shredder Single Shaft wood block Shredder is designed and ...

Brand Name:xinting

Model Number:xt

Place of Origin:China

hot water cold water pipe ppr pipe production line for the diameter 16-63mm PP-R Water Pipe Extrusion Line Extruder with special barrel feeding structure can largely improve extrusion capacity. Accurate temperature control, good plasticization and ...

Place of Origin:Zhejiang China

Brand Name:YTON

Model Number:MTTJ-01

... two traditional methods, one way is to install a pair of rubber roller on a rectangle table, and then press the adhesive onto the tread. Another way is to laminate the adhesive onto the casing surface directly. The former is better than the latter. First