non ionic isocyanate curing agent

Brand Name:HILHELM

Model Number:OS012

Place of Origin:China

Non-ionic HDI Coating Raw Materials for Water dispersible isocyanate curing agent OS012 Features Non-ionic HDI Coating Raw Materials for Water dispersible isocyanate curing agent OS012.High cross-linking density, high viscosity but good dispersion by hand ...

Brand Name:Zhuhai Feiyang Novel Materials

Model Number:GB930-100

Place of Origin:Zhuhai,

FEICURE GB930-100 Isocyanate Hardener PROFILE FEICURE GB930-100 is a solvent-free isocyanate curing agent with - the NCO group. PROPERTY The non-volatile solvents can be made into solvent-free and low-viscosity environmental coating. Compared with ...

Model Number:SE6773

Place of Origin:china

Brand Name:WeiLi Resin®

Solvent Based Acrylic Floor Coatings Resin SE6773 is a two-component hydroxyl acrylic resin, by combining with isocyanate curing agent, the coating produced has high gloss, high fullness, good adhesion with the substrate, has strong anti-ultraviolet ...

Brand Name:DAHUA

Model Number:DH1618

Place of Origin:CHINA

Solvent-free epoxy curing agent DH-1618 is a modified cycloaliphatic amine-based curing agent designed for epoxy resin systems. It is widely recognized for its excellent balance of mechanical properties, chemical resistance, and ease of handling. This ...

Brand Name:HAOLISEN

Model Number:HL-1607LB/HLS-1701A

Place of Origin:Shanghai China （Mainland）

Solution for the Car seat electrophoresis paint. Product Introduction HL-1607LB/HLS-1701A Black Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd. It represents modern ...

Brand Name:EXCEEDCHEM

Model Number:ETHACURE300(DMTDA)

Place of Origin:China

... are mixed in a one-to-one ratio. The polyol part is described in the part about the polyurethane resin. For simplicity, the polyisocyanate portion of the polyurea can be referred to as a curing agent. Polyurethane can be provided as a two-pack system

Brand Name:KangLiBang

Place of Origin:Guangdong, China

...Agent Product Description As a curing agent for HTV silicone rubber in compression moulding, C-15 delivers cured silicone that is non‑toxic, highly resistant to yellowing, and odourless. The silicone raw material must be cured at an elevated temperature of 170–175°C. Processing: Required curing temperature: 175°C. Mixing ratio (relative to silicone rubber): 0.8–1.2%. The curing agent...

Brand Name:LANSEN CHEM

Model Number:LSC-500

Place of Origin:CHINA

...outstanding anti-adhesive agent, release agent, and anti-sticking solution, it is ideally suited for rubber and plastic products. The emulsion achieves uniform coverage on the surface of rubber particles, ...

Brand Name:Synerguar

Model Number:SN-HPG

Place of Origin:China

Non-ionic guar gum with cost-effective for dry strength agent in papermaking applications 1. Descriptions: Non-ionic guar gum belongs to natural galactomannan, one of the quality improvers, natural thickening agent. In major paper mills, guar gum has basically replaced starch as a strengthening, retention, filter aid and paper surface performance improver. The non-ionic...

Brand Name:JT-RESIN

Model Number:JT8897AB

Place of Origin:China

...curing agent for M&H voltage current Transformer and Electrical insulation TDS: Electrical Insulation Materials JT 8897A Epoxy Resin 100 pbw JT 8897B Epoxy Hardener 90 pbw Silica filler 330-350 pbw JT 8897A JT 8897B Product data (guideline values) JT 8897A Liquid modified Epoxy resin TYPICAL VALUES* Viscosity@25℃, mPa.s[ASTM D-2983] .............................................................. 5000–12000 Non...

Brand Name:Slinmeng

Model Number:PVP K90

Place of Origin:China

PVP K90 Film Forming Agent Polyvinylpyrrolidone Cosmetic-grade CAS:9003-39-8 INCI: Polyvinylpyrrolidone CAS No.: 9003-39-8 Appearance: White or milky white powder Description : Polyvinylpyrrolidone (PVP) is a non-ionic polymer compound. PVP is classified...

Brand Name:JOYWAY

Model Number:JYLQ－01A/B

Place of Origin:China

Polyol and Isocynate for the air filter JYLQ－01A/B Introduction: JYLQ-01A is made up of polymer polyol, grafted polyether polyol, cross linker, blowing agent, and composite catalyst. JYLQ-01B is made up of modified MDI. This system has good liquidity with ...

Brand Name:WeiLi Resin®

Model Number:WL-AC040

Place of Origin:China

It is a water-soluble modified polyamine adduct, recommended to be used with water-based epoxy resin, designed for anti-corrosion primers for various metal substrates and epoxy floor paints. Physical Property: Item Value Testing Method Appearance Light ...

Brand Name:HONINGLITE

Model Number:CEO-25

Place of Origin:CHINA

Cardanol Biodegradeable Nonionic Surfactants as a Substitute for alkylphenol ethoxylates (APEO) Product description HONINGLITE™ CEO Surfactants are a new generation of high-performance, readily biodegradable specialty surfactants based on Cashew Nutshell ...

Brand Name:SiChun HongJian

Model Number:Polyacrylamide

Place of Origin:China

Polyacrylamide Product Details Product Introduction Polyacrylamide (PAM) is a linear polymer appearing as white powder or granules. Available in anionic, cationic and non-ionic types with molecular weight from 5 to 25 million, it's widely used in water ...

Place of Origin:China

...agent 3267 【product introduction】 Mercerized wool smoothing agent is made of a very good stability of organic silicone emulsion which is adopt imported organic silicon material, Excellent smooth degree, can make smooth agent, lubricant, can largely reduce the fiber friction coefficient, which can be used alone, and also can mixed use with cationic and non-ionic...

Brand Name:ATET

Place of Origin:CHINA

..., and can be used simultaneously with anionic and non-ionic surfactants. It is easily soluble in water of any hardness, has excellent diffusibility and protective colloidal properties, has no surface activity such as penetrating foaming, has affinity for

Brand Name:DR

Model Number:DR-8465

Place of Origin:Made in China

... Defoamer Agent For Textile Coating Defoamer DR-8465 is composed of ethoxylated acetylenic diol surfactant,with good wetting of particles and substrates. Specification Test Result Appearance Colorless transparent liquid Ionic type Non-ionic Active ...

Brand Name:Senzhuo

Model Number:SZ-MM

Place of Origin:China

...Agent Overview of Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent It is a non-ionic surfactant, also known as 9-octadecanoic acid amide or oil amide. It is white powder or sheet at room temperature, non-toxic, and insoluble in water Product Parameters of Chemical Raw Materials Oleamide CAS 301-02-0 Chemical Auxiliary Agent...

Brand Name:Hanast

Model Number:HN-E615

Place of Origin:Guangdong,China

...non-toxic translucent Food grade mold silicone rubber liquid manufacturer Product Introduction: HN-E series liquid silicone rubber is a two-component addition type silicone material. It consists of two parts: A component is liquid silicone rubber, B component is a curing agent, and the two components are mixed in a ratio of 1:1. This product is a translucent oily liquid, which can be cured...