n male spinner dummy load

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-ODM

Place of Origin:CHINA

...Male RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-ODM

Place of Origin:CHINA

...Male RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-30W-ODm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface Din Male...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR...

Brand Name:ZD

Model Number:ZD-DL-3GHz-300W-NF

Place of Origin:China

...Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male...

Brand Name:LENOLINK

Model Number:LDL-200

Place of Origin:CHINA

...Load Dummy Load 4.3 - 10 or Din Male Connector 160dBc PIM Description: 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm 4. IP 67 , outsider , good waterproof. 5. Connector :4.3-10 male Specification: Type No. Load...

Brand Name:ELT

Model Number:SMP-KR8-0.5W

Place of Origin:Shaanxi, China

...Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50Ω, including SMA, SSMA, SMP, SSMP, CSMP, N, TNC, K2.92mm and other male...

Place of Origin:changzhou

Brand Name:XINLIANFENGYUAN

Model Number:AC-190

F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ...

Model Number:ZCT-2RS-18L

Place of Origin:Chengdu,China

Brand Name:Zysen

2Watt SMA 18GHz coaxial Termination Zysen's 2W Wideband (DC-18 GHz) terminations available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.15 Typ. Electrical Specifications Frequency Range DC – 18GHz Power 2W CW at 25°C (Derated linearly...

Brand Name:Terui

Model Number:SMA-50JRN-50JR-18A

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...

Brand Name:HICORPWELL

Model Number:SMA-K Calibrator

Place of Origin:China

... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction ...