mvr tester for plastics

Brand Name:JINHAIHU

Model Number:XNR-400C

Place of Origin:BEIJING, CHINA

...;GB3682 2000,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries. Feasurres:

Model Number:LR-A001-C

Place of Origin:China

Brand Name:Lonroy

...Tester MFR/MVR Testing for Plastic Discription This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics...

Brand Name:GC

Model Number:GC-MI-DP

Place of Origin:China

... every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, poly sulfoxide, fluorine plastics, nylon and other engineering plastics. Also,

Brand Name:BonninTech

Model Number:XNR-400E

Place of Origin:Wuhan, China

...PP, POM, ABS, PC, nylon and Fluor plastics, etc) under high temperature, according to test methods of GB/T3682, ISO1133, ASTM D1238 test standard. It is widely supplied to the production ...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-R803-1

...Tester , Automatic Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic...

Brand Name:ZL

Model Number:ZL-3013

Place of Origin:China

ISO 1133 Melt Flow Index Tester MVR MFI MFR Plastic Equipment Equipment Overview The Plastic MFI Melt Flow Index Test Equipment is designed to determine the melt flow rate of thermoplastics (MFR; units: g/10min). This ...

Brand Name:YUYANG

Model Number:YY166

Place of Origin:China

100~450℃ Melt Flow Index Tester MFR MVR Thermoplastics ISO 1133 ASTM D1238 ISO 1133 Vs. ASTM D1238 ISO and ASTM offer their standards for purchase at their respective websites. In the world of plastics, melt flow index measures the output rate -- or flow...

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:CHINA

... and stability(high quality and high performance) 5. Provide our customers 2 year after sales service. Gold Brand Melt Flow Index Tester Gold Brand Melt Flow Index Tester Uses:

Brand Name:Kejian Kinsgeo

Model Number:KJ-8261

Place of Origin:Dongguan China

...±10％ 50Hz Free Falling Dart Impact Tester For Plastic Flim Use: falling dart impact tester is suitable for plastic film or sheet do the free falling dart impact test under certain height,measure 50% plastic film or sheet sample breakage when the impact...

Brand Name:Gold

Model Number:GD-ASTMD2843

Place of Origin:China

...tester Product information The ASTM D2843 smoke density tester is a professional laboratory device designed to evaluate the density of smoke produced by plastic materials during combustion or decomposition. It is widely applicable to various plastic products, including homogeneous plastics, laminated plastics, and foam plastics, in areas such as building materials such as plastic...

Brand Name:Haida

Model Number:HD-R906

Place of Origin:China

Series Pull-out Tester Plastic Pipe Fitting Description: Series Pull-out tester Plastic pipe fitting is applicable to test the drawing resistance of polyethylene pressure pipe when it bears longitudinal tension at different temperatures after connecting...

Brand Name:Lixian

Model Number:HZ-1717

Place of Origin:China

...manufactured according to the relevant provisions specified in the American UL94 standard "Flammability Test of Plastic Materials for Equipment and Appliance Parts". The vertical flammability test is equipped with a gas flow meter to adjust the size of

Brand Name:NANBEI

Model Number:ANL-WP1

Place of Origin:China

... ANL-P bottle lid torque tester is an intelligent and multifunction measure instrument. Specially designed for testing and examining all kinds of bottle lid to open and close torque. Applied in ...

Brand Name:iqualitrol

Model Number:XLB-30

...1mm impact by fall darts in a given great freedom to fall, test the impact quality and energy were when 50% plastic film or chip was damaged. Working Principle: When trial is beginning,firstly choice test methods, estimates that an initial quality and Δ m

Place of Origin:China

Brand Name:Raytech

Model Number:LX-A

LX-A Analog durometer, shore A hardness tester, rubber plastic hardness tester LX-A durometer is an essential characteristic of various rubber, elastomers and plastic products. It is feature portability, ease of operation, with facility, high resolution...

Brand Name:AISRY

Model Number:ASR-4326

Place of Origin:China

...materials. It is designed and manufactured according to the relevant provisions stipulated in the United States UL94 standard and GBT2408 "The flammability test of plastic materials for equipment and appliance parts", and the plastic parts of equipment and

Brand Name:GAOXIN

Model Number:GX-3050

Place of Origin:Guangdong, China

...including sunshine, rain and dew by exposing the sample to the controlled inter-circulation of the sunshine and moisture with the high temperature. The tester simulates the sunshine using the UV lamp, the moisture using the condensation or spray. And it is

Brand Name:BOTO

Model Number:BT008

Place of Origin:CHINA

Electrical Digital Rubber DIN Abrasion Resistance Tester Price For Plastic DIN Abrasion Testing Machine Equipment summary: The main function of CE DIN Rubber Abrasion Resistance Testing Machine is to test the friction of surface by a particular piece of ...

Brand Name:PERFECT

Model Number:PT-5066

Place of Origin:Donguan, Guangdong,China

Top Compression Testing Machine Touch Screen Type Stretch Tester For Plastic Top Compression Testing Machine Application : Top Compression Testing Machine Electronic Type Stretch Tester For Plastic is mainly designed to the instrument of the food ...

Brand Name:HAIDA

Model Number:HD-W258

Place of Origin:Guangdong, China (Mainland)

... Power 150mm Stroke friction coefficient tester For Plastic Film Application The friction coefficient tester is mainly used to measure the static friction coefficient and dynamic friction coefficient of plastic film and thin sheet or other similar material...