m50 hammer

Brand Name:ROSCHEN

Model Number:CIR65, CIR70, CIR80, CIR90, CIR110.

Place of Origin:Germany

... through a wide range of rock types, the variety of which continues to extend well beyond the original conception of early blast hole drilling. Down-the-Hole refers to where the hammer action occurs when compared to drifter hammers,

Brand Name:SOLLROC

Model Number:M50

Place of Origin:China

...M50 DTH Down The Hole Hammer For Quarry Drilling Product introduction: DTH Hammer is one of key components for drilling equipment. They are powered by compressed air medium and supply continuous impact for bottom rocks with down-the-hole bit. They are widely used in ore drilling, water well drilling, Geothermal drilling, foundation drilling and oil drilling. M50 DTH hammer overview: shank M50...

Brand Name:MIROC

Model Number:DTH Hammer

Place of Origin:China

YELLOW 5.0'' QL50 DHD350 M50 SD5 Series DTH Hammers Down the Hole QL50 Hammer Specification: Drilling Diameter(mm) Hammer Length(mm) External Diameter(mm) Weight(kg) φ135-φ155 1156(without bit) 125 73(without bit) Working Pressure(Mpa) Air Consumption(m³/...

Brand Name:Huilian

Model Number:BRP30/M30 BRH40 BRP45/50/M50 BRP70/60/M60/M70 BRH75/76/90/91 BRP85/95/100/M85/M95 M125 SX

Place of Origin:China

BRP85/95/100/M85/M95 Hydraulic Hammer Parts Excavator Breaker Chisel BRP30/M30 BRH40 BRP45/50/M50 BRP70/60/M60/M70 BRH75/76/90/91 Product name MONTABERT Hydraulic hammer spare parts chisel rock breaker tool hydraulic breaker chisel Advantage high quality...

Brand Name:TR

Model Number:TR-175

Place of Origin:CHINA

...Hammer mechanism 打击结构 Air inlet 进气口 尺寸 Anvil length 外露长度 Bolt capacity 螺栓 最大能力 Air pressure 空气压力 N.W 净重 TR-770 3/4" or1〃 4800 1880 Twin hammer or pin less Hammer 3/8" 1.5〃 M28 90 PSI 5.75kg TR-175 1/2” 6000 950 Twin hammer 1/4" 1,z M18 90 PSI 2.75kg TR-7595 1〃 3700 4000 pin less Hammer 1/2〃 8〃 or 9" M50 90 PSI 173kg Air Impact Wrench Parts TR Air Impact Wrench Set Double Hammer

Place of Origin:China

Brand Name:Jinquan

Model Number:DHD340A, DHD350R, DHD360, DHD380; Cop32, Cop34, Cop44, Cop54, Cop64, Cop84; Mission 40, Mission 50 , Mission 60, Mission80; SD4, SD5, SD6, SD8; TD40, QL50, QL60, QL80; BR2, BR3.

..., DHD340, MACH44, SD4, M40, QL40, BR4 5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, MACH50, SD5, M50, QL50, BR5 6), Dia. 152mm-254mm shank COP64,