low temperature density determination apparatus

Brand Name:AI

Model Number:F8200

Place of Origin:China

... placing it at a specified test temperature for a set period, then removing it to observe changes in appearance such as transparency, precipitation, layering, etc., while also measuring flowability. Main Features 1. Imported Fully ...

Brand Name:Shandong Shengtai Instrument Co.,Ltd

Model Number:SH112EM

Place of Origin:CHINA

...Kinematic Viscosity of Petroleum Products and Algorithm for Dynamic Viscometers" and GB/T1884 "Laboratory Determination of Density of Crude Oil and Liquid Petroleum Products (Density Meter Method)". Two viscosity or two density tubes can be

Brand Name:Pego Tester

Model Number:PG-LTI

Place of Origin:China

...Low Temperature Impact Test Apparatus 1. Introduction of Low Temperature Impact Test Apparatus: Low temperature impact test apparatus is designed according to IEC60884-1 clause 30.4 figure 27 & figure 42, IEC60811-1-4, VDE0620, GB2951.4, GB2099.1 clause 24.4 and 30.4 figure 27 & figure 42 and etc. It is applied to do the impact test under the condition of low temperature...

Brand Name:Sinuo

Model Number:SN2127

Place of Origin:China

...Low Temperature Impact Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device is used to check the impact resistance at low temperature of electrical accessories, as well as wires and cables. Equipment characteristics: This device should be used with low temperature

Brand Name:HeJin

Model Number:HC9924

Place of Origin:China

... Low Temperature Impact Test Apparatus (100 mm Drop Height) Product Overview The IEC 60811-1-4 Low Temperature Impact Test Apparatus is designed to evaluate the impact resistance of electrical cables, insulation, and sheath materials under low-temperature ...

Brand Name:GOLD

Model Number:GD-ISO5659

Place of Origin:China

...solid materials and components installed vertically in a closed box. This widely used equipment measures the specific optical density of smoke generated by a material in a closed box, with or without a pilot flame, when a substantially flat sample with a

Brand Name:vouch

Model Number:5920

Place of Origin:China

Smoke Density Test Apparatus of Plastic Material Model:5920 Main configure: 1.)17inch touch control computer main engine 2.)America NI software design platform 3.)Import heat flow 4.)Import electrical control part 5.)Import temperature sensor 6.)Sus 304 ...

Brand Name:YUYANG

Model Number:YYF011

Place of Origin:China

... are burned. It can also be used for the determination of static smoke content when other solid materials are burned. 2. Standard Meets GB/T8627, ASTM D2843 standard requirements. 3. Main ...

Brand Name:LONROY

Place of Origin:Guangdong, China

... tester is used to measure the density of transparent, low-viscosity liquids and viscous liquids. Density refers to the mass of substances contained in one unit volume at a specified temperature. The density of petroleum products increases as the amounts

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-12

Place of Origin:CHINA

... smoke generated by the determination of smoke, is the test of textile materials, solid material burning smoke production of special equipment. Building Material Fire Tester ...

Brand Name:DAXIAN

Model Number:DX8368

Place of Origin:China

ISO 5659 NBS Plastic Flammability Smoke Density Performance Testing Equipment Product Description: - The test equipment is suitable for determining the specific optical density of the smoke generated when the plastic is burned, and the maximum specific ...

Brand Name:Shengtai Instrument

Model Number:SD-2801C

Place of Origin:CHINA

PRODUCT DESCRIPTION SD-2801C ISO 2137 Constant Temperature Cone Penetration Tester SD2801C Temp Control Accuracy 25±0.1℃ The SD2801C constant temperature cone penetration tester is designed and manufactured according to the technical requirements and ...

Brand Name:HGI

Place of Origin:China

...Low Temperature Freezer designed to meet the needs of various laboratory and research applications. With its advanced features and reliable performance, this Chest Freezer is a valuable addition to any scientific environment. Constructed with high-density polyurethane foam insulation material, this Ultra Low Temperature Freezer ensures optimal temperature...

Brand Name:SHC

Model Number:SC-DC27

Place of Origin:China

...Low Temperature Pressure Impact Test Apparatus, IEC Test Equipment Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature...

Brand Name:Btutest

Model Number:BTU-bdoc

Place of Origin:Made in China

Bulk Density Of Cement Cement Testing Equipment Description: It is used to determine the bulk density, compact density and void ratio of sand in natural state. Test method for bulk density and uniformity of bulk density.Cement Testing Equipment ...

Brand Name:BAXIT

Model Number:BXT-JC

Place of Origin:Shanghai, China(mainland)

Great Quality Building Material Smoke Density Tester First, the scope of application: The building material smoke density tester is developed according to the technical conditions stipulated in the national standard GB/T8627-2007 "Test method for ...

Brand Name:HongCe

Model Number:LTI-1

Place of Origin:China

Low Temperature Pressure Impact Test Equipment IEC60884 Figure 27 Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature...