liquid and solid sg tester

Place of Origin:Guangdong, China

Brand Name:LONROY

ASTM D792 ISO 2781 Densimeter Liquid and Solid Density Testing Machine ISO 1183 ASTM D297 High Accuracy Lab SG Density Meter Product introduction Rubber, wire and cable, aluminum products, plastic particles, powder metallurgy, mineral and rock, precision ...

Brand Name:LIYI

Model Number:QL-120G

Place of Origin:China

Multifunction Solid Density Meter, Liquid Density Meter Product Description Suitable for: Rubber, Plastic, Film, Electric wire, Glass industry, Liquid, Adding additives, New materials research lab. Principle: According to ASTM,JIS,GB/T,ISO standards, ...

Brand Name:CHENGFENG

Model Number:CF9054

Place of Origin:China

The definition of the water droplet Angle is in solid and liquid. The contact Angle between the gas-liquid phase interface and the solid-liquid phase interface at the gas-liquid phase interface is a measure of the humidity of a solid surface. It is ...

Place of Origin:CHINA

Brand Name:Shengtai instrument

Model Number:ST149B

According to ST149B automatic oxidation stability instrument, food is kept relatively stable in a short period of time under the closed condition of room temperature and under the environment of oxygen without overpressure. When the food is heated and ...

Brand Name:LIVIC

Model Number:VS

Place of Origin:Shanghai

High Efficiency Solid Liquid Separator for Industrial/Commercial Application​ Description VS Series Centrifugal Solid-liquid Separator (VS Separator for short) is widely used in the field of solid-liquid separation. It separates precipitable particles fro...

Brand Name:SG

Model Number:SG-2230

Place of Origin:CHINA

... lines, and fuel pumps without removing it from the vehicle. Features and benefits: Large, easy-to-read 0-100 psi scale, 0-700 kPa. Solid brass fittings. Pressure relief valve for

Brand Name:BAXIT

Model Number:BXT-100H

Contact angle measuring instrument The contact angle refers to the tangent line of the gas-liquid interface at the intersection point of the gas, liquid, and solid phases. This tangent line forms an angle θ between the liquid side and the solid-liquid ...

Place of Origin:China

Model Number:GD-III

...Tester With HotDisk Method Multifunctional Rapid Thermal Conductivity Tester (Transient Plane Heat Source Method, HotDisk Method) This advanced instrument measures thermal conductivity, thermal diffusivity, specific heat capacity, heat storage coefficient, and thermal resistance for various materials including solids, rocks, powders, liquids...

Brand Name:HAIDA

Model Number:5111-HD

Place of Origin:china

...CONDOM ACCELERATED AGING TESTER Technical Specifications Attribute Value Deoxygenation Tube Dedicated to ECD detector Sample Size 1-10 mL Temperature Control Range RT+4℃~450℃ Detection Object Solid Test Object Powder, Solid, Liquid Content Analysis ...

Brand Name:LAB TECH

Model Number:CVT-I

Place of Origin:China

CVT Solid Material Calorific Value Tester Introduction: Gross heat of combustion of materials is an important parameters to evaluate building materials heat release and fire base data; CVT Solid Material Calorific Value Tester is the most common device...

Brand Name:HEREXI

Model Number:RH2010SF-I

Place of Origin:Changsha, China

Milk rapid moisture tester The instrument that can detect the water content of all kinds of organic and inorganic solids, liquids, gases and other samples is called the water meter, and the physical meter and chemical measurement method can be classified ...

Brand Name:DAXIAN

Model Number:DX8352

Place of Origin:China

... a fixed ×height (35mm) at a fixed height (35mm) on the surface of a solid insulating material on the surface of a solid insulating material, and to determine its relative tracking index (CTI) and tracking resistance index (PTI). It is suitable for the

Model Number:UP-5033

Brand Name:YOUBI

Place of Origin:CHINA

...Tester for Flammability Assessment of Materials Tracking and Erosion Tester - ASTM D2303 & IEC 60587 Product Overview The tracking tester applies a specific voltage between platinum electrodes (2mm×5mm) on the surface of solid insulating materials and drips a specified volume of contaminated liquid (0.1% NH₄CL) from a fixed height (35mm) at fixed intervals (30s). This evaluates the tolerance of solid...

Brand Name:ZL

Model Number:ZL-1030

Place of Origin:China

...Tester The IEC60243 Voltage Breakdown Tester is designed for comprehensive electrical strength testing of solid insulating materials under power frequency and DC voltage conditions. Applications Primarily used for testing solid insulating materials including plastics, films, resins, mica, ceramics, silica gel, glass, insulating varnish, and similar materials. Performs measurements in air or liquid...

Brand Name:kingpo

Place of Origin:china

Model Number:KP-FT03

...Tester Brief Introduction Tracking tester(Tracking Index Test)is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60112 ,UL 746A ,GB/T4207,GB4706.1,ASTM D 3638-92,etc. tracking test of leakage current (Tracking Index Test)on the surface of solid insulating material between platinum electrodes in required size ( 2mm × 5mm ),is to exert voltage and drip down a conductive liquid

Brand Name:BOWEE WATER

Model Number:BWSS

Place of Origin:China

...SGS Approved Description: A no-moving part unit that cascades solid laden slurry down a wedge wire screen to separate solids from liquids. The slurry is pumped or gravity fed into the unit’s top chamber, flows over a full-width weir and cascades down the surface of the curved screen. The liquid passes through the screens voids into a collection chamber below. Solid...

Brand Name:Shengtai Instrument

Model Number:SH103A

Place of Origin:China

... power consumption and energy saving design, suitable for petroleum, chemical, electric power, pharmaceutical and other fields, can be tested sample type: solid, liquid,

Brand Name:Customer's Logo

Model Number:Kson8901-1b2

Place of Origin:CHINA

1 Liter Square Tin Can for Motor Engine Oil and Other Liquid Made by Vietroll Material metal tin Shape Rectangle Dimension 116*59*185mm Wall Thickness 0.21mm Printing offset printing, embossing,Glossy Lamination,Stamping Outside: color printed or plain ...

Brand Name:AI

Model Number:AIC-1119

Place of Origin:China

...Tester for Engine Coolants and Antirusts Introduction The test principle of the percent ash content tester is to let the sample evaporation or burning under certain conditions,and put it in a strong heat source burning and ashing, then calcine the solid residue,then it can test the ash content of the test product. The percent ash content tester is suitable for the detection of unused commodity engine coolant and liquid

Brand Name:HOOHA

Model Number:ZY6195B-ZN

Place of Origin:China

... detection: platinum resistance Accuracy: 2.4 + / - 1 ℃ 2.5 repeatability: conforming to gb3536-2008 (ASTM D92), GB/T 267-88 2.6 display: color liquid crystal display 2.7