iso standard block test specimen

Brand Name:HUATEC

Model Number:YM-D

Place of Origin:Beijing

...) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:150µm Width target value:0

Brand Name:Haida

Model Number:HD-M014

Place of Origin:China

...Block Kitchenware Tester with Heater and Thermostat Aluminum Block Test Specimens Introduction Estimated Packaging Dimensions: (W*D*H) 900*600*750mm Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed) Estimated Gross Weight: 80kg Specifications Suit for standard: CEN/TS 12983-2: 2005 Annex D & BS EN 12983 Annex M Diameter of the block...

Brand Name:HUATEC

Model Number:YM-B3

Place of Origin:China

... plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The location numbers were 1, 2 and 3 in order of size. The position, spacing and other requirements shall be in

Brand Name:AAREAL

Place of Origin:China

... sieve, test screen, lab screen, experimental sieve, standard sieve, inspection sieve, standard test sieve, sampling sieve, particle sieve, analysis sieve, checking sifter, soil sieve, sieve set, pharmacopeia screen, ...

Brand Name:LABTONE

Model Number:EV210

Place of Origin:Dongguang, China

ISO Standard Vibration Testing Shaker Table For Product Quality Assurance Shake Test​ Description Rugged suspension system and linear motion guiding, strong carrying capacity, good guiding functions, high stability Load ...

Brand Name:TopInspection

Model Number:Laboratory Testing Services

Laboratory Testing LT According To Client Request Case By Case To Do Testing We provide a wide range of services for testing: Metals Composites and polymers Construction materials Soil Mechanical, electrical and electronic components and systems For most...

Brand Name:Gaoxin

Model Number:GX-5025

Place of Origin:China

...,IULTCS/IUP 20-1,ISO 17694,EN 13512 ,EN344-1 section 5.13.1.3 and annex C,EN ISO 20344 section 6.6.2.8,AS/NZS 2210.2 section 6.6.2.8,ASTM D 6182 Technical Specifications: Model GX-5025 Fixture 12 Groups Specimens test block 70×45mm Bending Angle 22.5°

Brand Name:TMTeck

Model Number:Precision Star TAM Panel

Place of Origin:China

...) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B Depth:100µm Width target value:0

Brand Name:Ai Si Li

Model Number:HVS - 1000

Place of Origin:CHINA

...a simple and accurate means to automatically measure the diamond indentation and give Vickers hardness number. It is suitable to measure the micro hardness of small, thin specimen, and superficial permeable coating (or plating) layer etc such specimen, as

Brand Name:GESTER

Model Number:GT-KC23

Place of Origin:China

ISO 3380 Leather Testing Machine Leather Shrinkage Temperature Tester Product Introduction Application: The Leather shrinkage temperature tester is mainly used to determine the shrinkage temperature of leather and fur. The specimen is heated at a specified rate in water until it is shrunk considerably. Standards: ISO 3380, IULTCS /IUP 16, QB/T 2713, QB/T 1271 Key Specifications Model GT-KC23 Beaker Volume1000ml, Depth140mm Fixed test...

Brand Name:YUYANG

Model Number:YY510

Place of Origin:China

...Test Apparatus Description: Ignitability test, also called single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens...

Brand Name:SKYLINE

Model Number:SL-L53

Place of Origin:DONGGUAN,CHINA

Product information The circular test specimen is fixed on the opening of a test bottle containing a certain amount of solid desiccant of the water vapor permeability testing machine, and the desiccant inside the bottle and the air outside the bottle are ...

Brand Name:DAXIAN

Model Number:DX8456

Place of Origin:China

...is capable of testing any sample of size 165mm x 165mm and up to a maximum of 70mm thick, and measures the ignition characteristics of exposed surfaces of essentially flat materials and specimens. Standards: - ISO 5657 Features: - The sample orientation is

Model Number:ZL-8004

Brand Name:ZL

Place of Origin:Guangdong, China

..., bending, shear, peel, tear, and two-point extended tests (with extensometer) for quality control. It's suitable for testing various materials including textiles, rubber, plastics, synthetic leather, tape, adhesives, plastic film, composites, electronics,

Brand Name:Btutest

Model Number:40B\ 60B\ 90B

Place of Origin:Made in China

Curing Cabinet Cement Testing Equipment Standard: EN 196-1 EN 196-8 ISO 679 ASTM C109 ASTM C511 Description: It is used for standard curing and constant temperature and humidity test of concrete test block and cement test block. The inner tank of the ...

Brand Name:Haida

Model Number:HD-W810

Place of Origin:Guangdong, China (Mainland)

... the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area. Standard: ASTM D737 Standard Test Method for Air Permeability of Textile Fabrics ISO 9237 Textiles - Determination of the

Brand Name:wangtebei

Model Number:WTB-8101

Place of Origin:China

... research units to test the standard rubber test piece before the tensile test. For similar materials, the machine can also be die cut. Main technical parameters of manual punching machine 1, punching stroke: 25mm 2. Workbench ...

Brand Name:LIYI

Place of Origin:Guangdong, China

...paint, paper, flooring, plywood, glass and natural rubber,concrete and ceramics. The method is using the standard knife cutting the specimen, and then using the regulated models of grinding wheel with loading weight to be abrased. Remove the specimen after

Brand Name:Sinuo

Model Number:SN7710

Place of Origin:China

ISO 6941 Textile Fabrics Burning Behavior Flame Spread Properities Testing Chamber Application: The textile fabrics burning behavior tester is designed according to ISO 6941:2003 “Measurement of flame spread properties of vertically oriented specimens”. It is used to access the properties of textile fabrics in response to flame contract under controlled conditions, suitable for vertical burning performance testing...

Model Number:LR-C003

Brand Name:LONROY

Place of Origin:Guangdong, China

... 11405,ISO 2439,ASTM E4,BS 1610,DIN 51221,ISO 7500,EN 10002,ASTM D628,ASTM D638,ASTM D3574 ASTM D3574 ISO 2439 Foam Testing Machine Foam Hardness Compression Tester Tensile Testing Machine Use Suitable for aerospace,