internal coolant flat bottom carbide drills

Brand Name:AMG

Model Number:Standard/Customized

Place of Origin:China

AMG's hard alloy internally cooled straight groove drill bit is a high-performance hard alloy cutting tool designed specifically for precision mold processing. This drill bit is specifically designed to meet the requirements of high aspect ratio and high-...

Categories:Tungsten Carbide Drill Bit

Country/Region:china

...internal coolant 3 flutes tungsten carbide drill Product Name 3 Flutes 3D carbide drill bit Brand WXSOON Flute 2.0~20.00mm Flute Length 20~79mm Shank Diameter 4~20mm Total Length 62~131mm Material Tungsten carbide/solid carbide Application CNC Machining center/drill machine Coolant...

Brand Name:SUPAL

Place of Origin:Changzhou,Jiangsu,China

Model Number:OEM

... With internal coolant hole Material: Kennametal Grain Size:0.5um Co:12 % Flexural strength:4300N/mm2 For drilling hole , high preformance , high speed , with TiAlN coating getting long tool life HRC HRC45 , HRC55 , HRC60 , HRC65 ...

Categories:Carbide Drill

Country/Region:china

...Internal Cooling Tungsten Steel Drill Bit 60 ° Center Outlet Tungsten Steel Fried Dough Twists Drill Product description carbide drills are a popular choice for high-speed drilling applications where high precision, accuracy, and durability are required. When using carbide drills, it is important to maintain proper cutting conditions, such as feed rate, cutting speed, and coolant...

Brand Name:Hanyuhaoyang

Model Number:HYDN6.0*100*D6*150L

Place of Origin:China

Internal Coolant Solid Carbide Deep Hole Drills, Model HYDN8*120*D8*160*2Z, CVD Coated, 2 Flutes For Aluminum Machining Extra-long solid carbide drill bits are specifically designed for deep-hole drilling in confined spaces or applications requiring a high length-to-diameter ratio. Their defining characteristic is a length-to-diameter ratio significantly greater than that of standard drill...

Brand Name:BWIN

Model Number:10*55*100

Place of Origin:China

...: ​New fine particle tungsten steel base material, high hardness and wear resistance; The clearance gear is designed to locate the drilling position, enhance the stability and seismic resistance of the tool, and greatly reduce the

Brand Name:SHIELD

Model Number:GD series general machining internal collant straight shank drill bit GD03-0200

Place of Origin:Hunan China

Solid Carbide Internal Coolant Drill Bit for HRC55 drilling tools for general machining GD03-0200S, GD05-0230, MAIN FEATURES 1. Use high-quality tungsten material, high-precision imported Germany Walter CNC machine processing, so, the drills have high ...

Brand Name:MMM

Place of Origin:CHINA

Model Number:SPMG140512-GM

... requirements Need flat bottom blind hole Insert drilling or boring Chip formation and chip evacuation are important issues in drilling. It depends on the workpiece material, insert geometry selection, coolant pressure, capacity, and cutting parameters.

Brand Name:OEM

Model Number:customized

Place of Origin:Zhuzhou City, Hunan Province, China

...Carbide Blanks Round Solid Carbide Bar With Two Helix Internal Coolant Holes Product Description The Tungsten Carbide Rods (Cemented Carbide Rods), are used in high quality carbide cutting tools for the machining of heat-resistant alloys and Ti alloy, such as end mill, drill...

Brand Name:Metcera

Model Number:φ8.5 x 5D x 61 x 103 x φ10mm

Place of Origin:China

G-Internal Coolant Drill- 5D , Size : φ8.5 x 5D x 61 x 103 x φ10mm

Brand Name:MIROC R25 Button Bit

Model Number:R25 Button Bit

Place of Origin:China

R25 45mm Flat Face With Spherical Button Bit Products description: 1.Made from high alloy steel and YK05 tungsten carbide as same grade as internationally well-known brand 2.Apply "hot (thermal) -insertion" processing procedure to insert the buttons as ...

Brand Name:Metallic Cutting Tool

Model Number:XXXX

Place of Origin:China

.../65 HRC Flute: 2/3/4 Flute Helix Angle: 30/45/55 Degree Application: General-purpose operation Slotting, Drilling, Profiling Working Machine: CNC (computer numeric controlled) tool and cutter grinder machines Coolant: