insulation piercing test leads

Brand Name:HNMC

Model Number:MCOT502

Place of Origin:China

Insulation Dielectric Test-Insulation Oil Dielectric Strength Test Set MCOT502 Main Features Adopting ARM in-built CPU system Automatically fulfill the withstand-voltage test of insulating oil Touch screen operation and 7” LCD display, easier to operate With in-built thermal printer, which can print each breakdown and average voltage value Can save 100 group test results With Oil test...

Place of Origin:China

Brand Name:Sansion

...Insulating Boots and Gloves Tester Withstand Voltage and Leakage Current Tester Insulating Rod Test Set General Information: SXNYZ is a special device for batch testing of insulating boots (tools). It is also possible to test safety tools such as insulating rods, insulating screwdrivers, insulating mats,and so on. It is designed and manufactured by our company according to the test requirements of insulating...

Brand Name:Gaoxin

Model Number:GX-2670A

Place of Origin:China

... 17kg volume 39×26×23cm 2. Description: The Voltage Insulation Resistance Tester is used for testing voltage and insulation resistance of electrical appliance, up to line with requirement of UL,CSA,VDE, BS, SAA, FCC. 3. Features: 1. testing result is

Brand Name:HongCe

Model Number:PI-1

Place of Origin:China

...Insulated IEC Test Equipment Equipped With K - Type Electric Heater Product information: 1. This Plug set heat insulation tester is according to the standards of IEC60884-1 figure 40. 2. It is used for testing the improper heating resistance and burning resistance of bolt and plug with insulation sleeve. 3. It is able to imitate the insulated...

Brand Name:Ningbo Suntech Power

Model Number:FK-10KV

Place of Origin:Ningbo，China

10KV Insulation Resistance Tester , Cable Insulation Resistance Testing , Digital Display I. Product Introduction : Insulation resistance tester, also known as megohmmeter, is used for testing insulation resistance. FK-10KV insulation resistance tester...

Brand Name:DAXIAN

Model Number:DX8436

Place of Origin:China

...Insulator Hydrophobicity Test Device 1,Applicable scope: The composite insulator hydrophobicity live detection instrument is a new product for online detection of insulator hydrophobicity. Suitable for online detection of the hydrophobicity status of composite insulators in transmission lines with voltage levels of 110kV and above, as well as for hydrophobicity testing...

Brand Name:Fanke High-Voltage

Model Number:GM-10KV

Place of Origin:China

...the measurement of water-cooled generator test, but also can be used for laboratory or field testing insulation testing to do. Output current greater than 25mA. The maximum output voltage of 2500V. Includes high-precision micro-current measurement system,

Categories:Cable Clamp

Country/Region:china

Our service: ★sample order: 5 samples free accepted. ★customized according to client's design ★lead time:10days -30days . ★video inspection accepted to factory and product qiality Specifications: Item Specification Description Quantity Construction Type ...

Model Number:YDJ

Brand Name:Sansion Power

Place of Origin:China

...Insulation Test System The 20kVA/50kV High Voltage AC Insulation Test System is designed for evaluating insulation performance of electrical apparatus through controlled AC withstand testing. It provides a reliable test voltage source for checking insulation capability during manufacturing, installation, and preventive maintenance procedures. Featuring an Oil Immersed High Voltage Test...

Brand Name:Jetacon

Model Number:DCC-1

Place of Origin:China Mainland

...Test Leads Assortments Application: Electric or Electrical Testing Work Copper Test Leads Length: 100cm ( 150cm 200cm 300cm 400cm 500cm are also available ) Withstand voltage:>2KV Temperature range: -25°C - +85°C Contact resistance: <1.5mΩ Lyfe Cycle: >15000 times plug in and out DCC-1 ( 100cm Test leads ) Package Included: 1 x Test Leads...

Categories:Custom Cable Assemblies

Country/Region:china

... to 2 male Connector 1 BNC male Connector 2 alligator clips Length 1m Application oscilloscope More Descriptions BNC to Minigrabber Oscilloscope Testing Lead Wire for electronic testing equipment etc. Adopting 50-2-41 50ohm Pure Copper Coaxial Cable,

Brand Name:HIOKI

Model Number:HIOKI Insulation resistance test: 3490

Place of Origin:Japan

... ranges: 250/500 V (insulation test up to 100 MΩ), and 1000 V (insulation test up to 4000 MΩ) Continuous inspection, 3Ω range measured by 200mA Bright LED illuminated dial Detects live circuit and battery status Basic parameters Test voltage 250 V DC ...

Brand Name:HTI

Model Number:HTX-047

Place of Origin:Guangdong,China(mainland)

...Testing Equipment Shoes Sole Material Heat Insulation Tester Detailed Descriptions: The instrument used to detect the soles materials such as rubber, polymers etc. high temperature resistant ability. Principle: Sandbox is heated to 150 ℃, let sand cover sample vamp and the sole contact area, record the insole temperature changes over time in 30 minutes, accurate to 0.5 ℃ Specifications: Sandbox size: 400×400×80mm test...

Brand Name:Or-electric

Model Number:ORI(2E/5E/10E)

Place of Origin:Wuhan,China

...-precision micro-current measurement system and digital boost system. It can measure the test product by connecting it with only one high-voltage line and one signal line. II.Features ● Adopt 32-bit micro-controller control, ...

Brand Name:LIANGUI

Model Number:LG1-06A

Place of Origin:SHANGHAI

Terminal welding machine suitable for welding DC, banana plug, test lead probe, aviation plug Product parameter: Product name High-end terminal welding machine Model LG1-06A Power 200VA (net welding power) Operating temperature 5℃~35℃ Working humidity <70...

Brand Name:OEM / ODM

Model Number:OKY0262-1

Place of Origin:China

DIY Connection Test Lead 20cm 10pin Electronic Components Jumper Wire Male with Alligator Clips Description: 20CM 10PIN DuPont line with small ...

Place of Origin:Anhui China

Model Number:YH

Brand Name:JinHong

YH series welding cables are manufactured in strict accordance with GB/T 5013 and IEC 60245 international standards, and are specifically designed for various AC/DC manual arc welding machines, serving as dedicated connection cables. Unlike the general-...