hot wire ignition test machine

Brand Name:Haida

Model Number:6004-HD

Place of Origin:China

Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-annealed at a defined power (0.26W/mm) and duration (8-12 seconds). The wire is wound in five full turns around the sample at a 6mm pitch, then tested at the same power (0.26W/mm) until ignition

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire coil ignition test...

Brand Name:PEGO GROUP

Model Number:HW-1

Place of Origin:China

...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:DAXIAN

Model Number:DX8383

Place of Origin:China

...Wire Ignitability Test Machine Overview: The glow wire test is to test the stability of electronic and electrical products during operation. The glow wire itself is actually a resistance wire loop with a fixed specification. During the test, it must be heated to a specified temperature by electricity, so that the tip of the glow wire contacts the sample for a standard time, and then observe and measure its state. The test...

Brand Name:HeJin

Model Number:HWI-1

Place of Origin:China

...Testing Equipment Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot-wire...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...Hot Wire Ignition Tester, Annealing Time 8s-12s, Power 0.26W/mm±4% M.1 Hot wire ignition test M.1.1 Five samples of each material shall be tested. The samples shall be 1 50 mm long by 1 3 mm wide, and of uniform thickness stated by the material manufacturer. Edges shall be free from burrs, fins, etc. M.1.2 A (250 ± 5) mm length of nichrome wire...

Brand Name:Sinuo

Model Number:SN778

Place of Origin:China

...Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Place of Origin:China

Brand Name:KeRang

... test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Test sample:Information technology equipment, low voltage switch and control equipment parts.

Brand Name:SHC

Model Number:SC-HWI

Place of Origin:China

... holder distance 250mm Specimen holder distance and height 70mm,height:60mm (the distance between the holder surface to the tray surface) Wire wrapping tension and its distance 5.4N±0.05N, 6.35mm±0.

Brand Name:HOOHA

Place of Origin:Guangdong

Software Furniture Flammability Test Apparatus , PLC Automatic Anti Ignition Testing Machine Scope of application: The fire ignition source of the simulated match is evaluated against the ignition characteristics of the software furniture. Meet the ...

Brand Name:AI

Model Number:AIC-8191

Place of Origin:CHINA

... furniture conduct test methods and evaluation. This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition. Standard: ISO 8191-1~2

Brand Name:HOOHA

Model Number:FTech-FTPC 8

Place of Origin:DONGGUAN

... is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation This section applies to public places with mattresses, sofas and other upholstered furniture resistance to

Brand Name:D&T

Model Number:DTC-E2512

Place of Origin:Zhejiang,China

...Hot Wire Foam Cutting Machine 13.5kw 1. Description Of 2D EPS cutting machine Suit for: EPS Cutting line: Hot Wire All the machines are driven by the remarkable D&T Profiler software, which speeds up the design process and enables the operator to obtain the best yield from the foam block. D&T series 2D EPS cutting machine is a special cutting machine...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-K904

...Testing Machines / Hair Dryer Line Tail Wire Bending Test Machine Application : Hair dryer line tail bending test machine is suitable for testing wire in the maximum angle allowed in the resistance to bending and breaking rate , can be connected to a load test . dryer line tailbending testing machine testing principle : The sample is fixed on the fixture , test...

Brand Name:Lonroy

Model Number:LR-Q031

Place of Origin:China

...Wire Bending Testing Machine Cable Flexing Tester 1. Product Description The wire bending and swaying testing machine is also known as the wire bending testing machine or the swaying testing machine. This testing machine complies with the regulations stipulated in UL817 and other relevant standards regarding "General Safety Requirements for Soft Wire Components and Power Soft Wire...

Brand Name:ZL

Model Number:ZL-1018

Place of Origin:China

... wire ropes whose diameter are φ 6~φ 20mm during the reversing. The test can show the surface defects of wire during the test process. Technical parameters: Range of specimen diameter 0.1-1mm 1-3mm 3-10mm Test speed 60 ,90, 120m/min 60, 90, 120m/min 30,

Brand Name:Rongter

Model Number:WD8-2

Place of Origin:Jiangsu,China

... high temperature melting wire for cutting, so that the cutting fracture is straight, flat, high cutting precision, no sundries. This electric hot wire foam cutting machine is a D8 series product of Rongter. Compared with the D6 series widely sold in our

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.