hh52158 cable testing machine

Brand Name:HERRMAN

Model Number:/

Place of Origin:CHINA

...Cable Testing Machine Test Terminal Dry type cable test termination is a new test equipment which is different from traditional water type termination. Water type termination needs Hi-K water to get good insulation. It needs a kind of special resin to treat the deionized water. So it will cost much time on water treatment, also the water must be cooled down during test. Dry type cable test termination combines SF6 GIS structure and cable

Brand Name:AI

Model Number:FIPEC

Place of Origin:CHINA

...Behaviour of Bunched Cable Testing Machine INTRODUCTION EN 50399 specifies the apparatus and methods of test for the assessment of vertical flame spread, heat release and smoke production of vertically-mounted bunched wires or cables, electrical or optical...

Brand Name:Zhongli

Model Number:ZL-2112

Place of Origin:Guangdong,China

Automatic Loading Torsion Cable Testing Machine Metal Wire / Cable Rod Categories: One-way rotate around its own axis: the specimen to evenly rotating 360 degrees in one direction as a twist to the specified number of times or fracture of the specimen....

Brand Name:HOOHA

Model Number:QJ57 DC Kelvin Bridge

Place of Origin:Guangdong

... or workshop site and field work place, to test DC resistance, resistivity inside of metal conductor, resistance of conductor line, resistance of DC shunt, contact resistance of switch and ...

Brand Name:Infinity Machine

Model Number:RS-8100

Place of Origin:Made in China

...Cable Testing Machine Bending Endurance Test Adjustable Model: RS-8100 Application: Apply for bending endurance test for cable connected with plug. Fix the sample on jig and put the weight at the cable, then to swing the jig right and left with the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested...

Place of Origin:China

Brand Name:KeRang

...Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test sample:Cables...

Brand Name:Gaoxin

Model Number:GX-2670A

Place of Origin:China

... 17kg volume 39×26×23cm 2. Description: The Voltage Insulation Resistance Tester is used for testing voltage and insulation resistance of electrical appliance, up to line with requirement of UL,CSA,VDE, BS, SAA, FCC. 3. Features: 1. testing result is

Brand Name:I-SUNTOP

Model Number:XL-313B/C

Place of Origin:china

... the insulation thickness of the measuring wire.It is desktop-type, the scale is bolted to the base, and it is not required to carry the hand. The needle fixture is also accurate for the test of the

Brand Name:AISRY

Model Number:ASR-5622B

Place of Origin:China

...Cable Testing Machine Product Introduction: Wire bending test machine for plug leads, power cord, USB cable, headphone cable, audio cable, headphone cable and other finished wire bending test or swing test. This machine is the sample fixed on the fixture, and add a certain load, the test...

Brand Name:YUYANG

Place of Origin:Guangdong, China

...Cable and Wire YUYANG Cable Testing Machine - High Frequency Spark Tester for comprehensive cable and wire quality testing Product Overview Our high-frequency spark testers are designed for reliable detection of insulation defects in cables and wires. Available in 15KW and 25KW configurations to meet various testing...

Place of Origin:China

Brand Name:CHENGFENG

...testing machine for automotive wires and cables Scope of application: suitable for low-voltage primary cables for ground vehicle electrical systems with rated DC voltage of 60V (AC 25V) or below. The test in this paper is to test the quality of the cable under the action of limited fluid and physical stress. Standards: EN 50618-2014, SAE J 1128-2005 test...