helical dead end 0 5kg

Brand Name:HLLP

Model Number:DN1100

Place of Origin:CHENGDU CHINA

Preformed dead end for conductor Preformed dead end for conductor is made of galvanized steel wire,aluminum-clad steel wire or aluminum-allovy wire,and is designed for conductor installation in transmission and distribution lines.The conductor includes ...

Place of Origin:Hebei, China

Brand Name:HUAHENG

Dead End for ADSS 1. Product composition: a. Dead end component, b. structural reinforcing rod component ( armor rod) c.Thimble clevis, d.Thimble(Type O), e.Shackle. 2. Function and purpose Bear the tensile force, connect ADSS cable with tension pole/tower...

Brand Name:HENVCON

Model Number:OXY

Place of Origin:China

... onto tension tower/pole,corner tower/pole,and terminal tower/pole.A complete set of OPGW Helical Tension Set includes Aluminum Alloy or Aluminum or Aluminum-Clad steel Dead-end,Structural Reinforcing Rods,Supporting fittings and Grounding wire Clamps etc.

Brand Name:HC , OEM

Model Number:ANJ

Place of Origin:CHINA

...gripping the conductor, grounding wire and optical fiber application. According to the application needs, the guy grip includes dead end cable grips and dead end grip. The guy grip has helically formed legs with inert grits on every turn that holds the

Brand Name:UNIFIBER or OEM

Model Number:ANZ---001

Place of Origin:CHINA

Preformed guy wire grip helical tension set, ADSS dead end grip, For ADSS cable fixing and installation,ADSS hardware This product is a high-quality Dead end grip.To apply a variety of conductor cross section dimensions. Preformed Clamp for wires and heart...

Brand Name:ZXOFC

Model Number:ZXOFC

Place of Origin:ShenZhen,China

Preformed Hlical Fittings Guy Grips Dead End Adss Cable Tension Clamp Dead End Clamp Description THE PREFORMED TENSION SET is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the ...

Brand Name:Geto Telecom

Model Number:PDE

Place of Origin:China

Helical Cable Clamp DEADEND GRIPS FOR GUY WIRE Description The deadend grips is intended for use on single wood poles associated with distribution construction. They are made of the same material as the strand to which they are applied and are rated at 100...

Brand Name:Shengli

Model Number:LHY-1

Place of Origin:Shanghai,China

...Helical Ribbon Screw Mixer Machine For Powder General Introduction: The outer ribbon push the material from the two ends to the centre, inner ribbon push the material from center to the two ends.Thus to achieve material convention.The discharging port is set in the bottom centre, with the help of the outer ribbon,the material can be discharged completely, and no dead...

Brand Name:Zion communication OR OEM

Model Number:Dead-end for Short Span ADSS

Place of Origin:CHINA

Dead-end for Short Span ADSS Dead-end for Short Span ADSS with a small Tension Clamp material for aluminum-clad steel wire, mainly used for the corner towers, the middle of follow-tower and connecting the terminal tower, the largest installation file from the less than 100 meters. Pictures and illustrations: 1.U-Clevis 2.Thimble 3.Helical Dead-end Model Specification: Model Available Dia. of Cable(mm) Length of Dead-end...

Place of Origin:Zhejiang, China

Brand Name:DOWELL

..., high-tensile aluminum alloy for aluminum ally conductors; aluminum-clad steel for ACSR. Performed Dead-end clamps are used to fix conductors in the end or the middle of the overhead transmission lines. By wrapping the helical rods on a conductor,

Brand Name:Suntech

Model Number:SYG-100

Place of Origin:China

...5kg Crimping Force 6-10 tons (adjustable) Operating Temp -40°C to +50°C Elevation Range Sea level to 5000m High-Altitude Advantages: Reduced operator fatigue – Requires 30% less hand force Pressure compensation – Maintains consistent crimp quality regardless of elevation Applications: Transmission line dead-ends...

Brand Name:EVERSUN MACHINERY

Model Number:WLDH-5000L

Place of Origin:CHINA

... materials of different proportions mix evenly.The machine is made of stainless steel where it contacts with materials. The gap between pulp leaves and barrel body is small and there is no dead Angle in mixing. Sealing device is set at both ends of

Brand Name:WELLDONE

Model Number:CH-(50-5000)

Place of Origin:China

... / Double helical horizontal ribbon mixer CH model ribbon mixer is usually for mixing wet powder or filter cake form material. All contact part adopt SUS304, the gap between ribbon and chamber are very small, there has no dead corner. Two ends of shaft bei...