heat release rate tester for plastics

Brand Name:Gold

Model Number:GD-OSU

Place of Origin:China

OSU Heat Release Rate Tester for Aircraft Materials The OSU Rate of Heat Release Apparatus is an essential testing instrument for evaluating the fire resistance of aircraft interior materials. This equipment strictly complies with U.S. Federal Aviation ...

Brand Name:SKYLINE

Model Number:SL833

Place of Origin:China

...Heat Release Rate Tester Stainless Steel Combustion Test Chamber OSU Heat Release Rate Tester.pdf Product information The OSU heat release rate tester approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate...

Model Number:YYF003

Place of Origin:China

Brand Name:YUYANG

... calculates heat release rate based on oxygen consumption of flue gas during sample burning. Accurate heat release rate measurement is critical for fire risk prediction, fire prevention design and flame retardant material development. Working Principle The

Brand Name:DAXIAN

Model Number:DX8368B

Place of Origin:China

China ASTM E 1537 Heat Release Rate Tester/Large Calorimeter Scope of application: 10MW Heat Release Rate Tester applicable to buildings and large complexes (including locomotives, vehicles, furniture, warehouses and construction methods), as well as ...

Brand Name:HOOHA

Model Number:ZY6264

Place of Origin:China

ZY6264 10MW heat release rate test device 1.Scope of application: Applicable to buildings and large complexes (including locomotive vehicles, vehicles, warehouses and components) and extensive fire resistance test verification for raw materials, buildings...

Brand Name:AI

Model Number:MOSU

Place of Origin:CHINA

Rate of Heat Release (OSU) Tester Introduction: The OSU heat release rate tester, originally designed by Smith of Ohio State University in 1972, became FAA's designated combustion tester. The test standards are FAR Part 25 Appendix F Part IV, Airbus AITM 2.0006, Boeing BSS 7322 and ASTM E906. The Heat Release Rate (OSU) test is used by the aerospace/aviation industry to determine the heat release rate...

Brand Name:LONROY

Place of Origin:Guangdong, China

...Cement Maximum Heat Release Rate Test Machine Product Description Product Introduction This fully automatic cement hydration heat tester was developed by our factory in accordance with the national standard GB/T12959-2008, "Method for Determination of

Brand Name:CHENGFENG

Model Number:CF8348

Place of Origin:China

...heat release rate of building materials. Equipment performance indicators Power supply voltage: AC220V, AC 50Hz Maximum operating power: ≥5Kw The power of the conical heater is ≤5KW Heat output capacity: 0-120KW/m ³ Exhaust flow rate: 0.012m²/s to 0

Brand Name:JHH

Model Number:XNR-400C

Place of Origin:Beijing, China

Melt Flow Rate Testing Instrument for Plastic Material Flow Rate Analysis and Evaluatio Operating Principle: Melt Flow Rate Testing Instrument (plastic extruder) analyzes flow properties by melting samples via a heating furnace at specified temps, then ...

Brand Name:JHH

Model Number:XNR-400D

Place of Origin:Beijing, China

...rate, Melt-volume flow rate determinator for plastic Product Description: The melt flow rate meter works by melting the plastic sample into a heating cylinder and then pressing the melt into the tester by a quantitative mold method. The piston in the tester...

Brand Name:lixian

Model Number:HZ-Building Material Fire Tester-4

Place of Origin:CHINA

...performance standards, room corner combustion tester control platform to provide independent gas analysis, including heat release rate and other related test required for related instruments, such as paramagnetic oxygen sensor, CO2/CO measuring instrument,

Brand Name:LIYI

Model Number:LY-RR

Place of Origin:China

..., polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Standards: GB/T3682-2000,ISO1133-97, ASTM1238 Characteristics: 1) Fast heating speed, very small overshoot. 2) High precision of

Brand Name:VOUCH

Model Number:6810

Place of Origin:CHINA

Cone calorimeter Description: Cone calorimeter is the tester equipment of test material heat release which is designed by oxygen consumption principle.The principle of oxygen consumption is that each unit of oxygen consumed produces same amount of heat whe...

Brand Name:POOTAB,PERFECT

Model Number:PT-6099

Place of Origin:China

...Tester 30000mm Per Minute 180° Stripping Use: This machine is suitable for the tensile strength, peel strength, deformation of plastic films, composite films, adhesives, adhesive tapes, medical patches, protective films, release paper, rubber, artificial leather, paper fibers and other products Performance tests such as rate...

Brand Name:Delta

Model Number:IMO

Place of Origin:China

...Tester Introduction: IMO Imo Resolution Spread of Flame Tester is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release...

Model Number:UP-8022

Brand Name:YOUBI

Place of Origin:CHINA

...Tester High-speed peel tester designed for measuring tensile strength, peel strength, deformation rate, breaking force, peeling force, opening force, thrust and other performance parameters of various materials including plastic film, composite film, adhesive, adhesive tape, medical patch, protective film, release...

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-B617-S

... Tester Application: Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. Different test with different grips: tensile, peel, tear, heat ...

Brand Name:LIYI

Place of Origin:China

Model Number:LY-RR

..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2.

Brand Name:ZL

Model Number:ZL-3015A

Place of Origin:China

... and Vicat softening temperature of various materials including plastic, rubber, nylon, cable, and other macromolecular materials. Technical Specifications Parameter Specification Temperature range Room temperature - 300°C Heating rate (120±10)°C/h

Brand Name:BAXIT

Model Number:GLO-MF46

Place of Origin:CHINA

Digital Plastic Melt Flow Rate Tester Index Test Machine Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 degrees) for a long time. 3. Dual sensor ...