g5 14w fluorescent lamp

Brand Name:PEGO

Model Number:PG-AFD

Place of Origin:China

...) for fluorescent lamps according to IEC60598-1 clause 4.4.4. It is applied to assess the fixing device of lamhpolder should have adequate mechanical strength so as to withstand rough handling as may be expected in ...

Brand Name:Sinuo

Model Number:SN9926

Place of Origin:China

... to IEC60598-1 clause 4.4.4 Product Overview For Fluorescent Lamp Holder Axial Force Test Device: It is applicable to axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time 1

Brand Name:kingpo

Place of Origin:china

...Fluorescent Lamp Holder Axial Force Tester / Lighting and Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-LHA1

...content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4. It

Brand Name:Zhui Ming

Model Number:F359N

Place of Origin:Zhejiang

.../60Hz Charging Current 200mA(Nominal) Lamp type T5:14w-54w, T8: 18w-58w Battery Nickel-Cadmium Battery Indicator Red LED Indicates Charging Duration Time More than 3 ...

Brand Name:SHC

Model Number:SC-FFT

Place of Origin:China

Fluorescent Lamp Holder Axial Force Tester Technical parameters: Power 220V 50Hz The axial force 15N (bar weight), 30N (superimposed by a 15N vias weight onto the bar) Fixtures V-type fixture, front and back adjustable Holding specimen height range 0-250mm Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp

Place of Origin:China

...fluorescent lamp features: 1. compatiable with the existing ballast. 2. CE ROHS certificated ,spanlife>40000hours 3. 150lm/wNo noise:Without noise,it is suitable for precision electronic machines ,the library ,the school ,the office and so on . specification: model HS-T8-9W chip 2835 wattage 12-14W...

Place of Origin:China

Brand Name:Julixing

... lamps. Testing: The pins of the caps on finished lamps shall enter the gauge at surface O and fully inserted, the surfaces of cap and gauge shall contact. In this position the end of the pins shall be co-...

Brand Name:Fable

Model Number:FUV-4

Place of Origin:China

...Fluorescent Lamp for Gem and Jewelry 365nm and 253.7nm UV light lamp FUV-4 Specifications: Technical Parameter Size 170mm*170mm*140mm Function To check the fluorescence of the Gem and Jewelry Length Wave 365nm Short Wave 253.7nm Power supply Equipped with a global wide-voltage external power supply; output 12V/1A, Advantage Providing the dark room, drawer-type Weight 2.5kg Patent Yes Lamp Holder Demountable Warranty One year Lamp...

Brand Name:CROWN EXTRA

Model Number:BYS-Explosion Proof Fluorescent Light

Place of Origin:CHINA

... safety standards in hazardous environments where there is a risk of explosion. This specialized fluorescent light is built to withstand potential blasts and is engineered to provide reliable illumination in areas where traditional lighting fixtures could

Brand Name:UVIR

Model Number:G6T5

Place of Origin:China

G5 G13 6W Ozone uv highbay quartz glass sterilizer uvc disinfection germicidal ultraviolet uv lamp Why choose us 1. Lamps are approved by CE and RoHS. 2. Implement strict quality system according to ISO9001. 3. All lamps are tested one by one before delivery out from our factory. 4. You will get 1 year warranty for our UV lamps...

Place of Origin:Shenzhen,China

Brand Name:Sunshineopto

Model Number:SUN-LD105X150CR825

...14w Road Lamp for high way Quick Detail: Model No:SUN-LD105X150CR825 Material: PC Beam Angle :105X150 degree Lens size:265.3X52.3X10.7mm Led chips: XPE/XPG Small footprint, high light output Features : This SKD 2x7 LED Array lens with PCB Module is best choice to retrofit the old lamps 100W or design power lamps...

Brand Name:JJ

Model Number:BPY

Place of Origin:China

...Quality Ex De Iic T6 Gb Explosion Proof Fluorescent Lamp 2ft 4ft IP65 Led T8 Tube Bulbs 1. The shell is made of ZL102 cast aluminum + SPCC, dust-proof and explosion-proof, and easy to install 2. This lamp adopts flame-proof design, with constant current ...

Brand Name:Well House

Model Number:WH-MR-18

Place of Origin:China

...14w Wall Lamp Makeup Mirror Lighting(WH-MR-18) Our Advantages: 1 Fast delivery with good quality. 2 Accept OEM and customized design. 3 Urgent order can overtime production. 4 Send free accessories for defect lamps 5 2 years warranty for lamps 6 Our own factory so price is competitive than trade company. 7 Overall foam and outside kraft paper carton to protect lamps...

Place of Origin:China

Brand Name:Hawksky

Model Number:HS-T5-0.6-60

...(lm):660 Lamp Luminous Efficiency(lm/w):110 CRI (Ra>):80 Color Temperature(CCT):Pure White Working Temperature(℃):-40 - 45 Working Lifetime(Hour):35000 Lamp Body Material:PC Certification:CE, RoHS Place of Origin:Guangdong,

Brand Name:ZOMLNK

Model Number:ZK-TU104

Place of Origin:Guangdong, China

...Lamp holder Iron Base LED Tube Bracket for Double Fluorescent Tube Lights Key Words of LED Tube Bracket: * Power: 2x2FT / 2x4FT / 2x5FT LED tubes * Operating Voltage: AC100-277V/50-60Hz * Fully wired with VDE certified wires, terminal block, G13 lampholders; * Replicable: T8/G13 linear fluorescent tube * Materials: Iron 0.35mm thickness before painted * Suitable for both Fluorescent lamps...