five star penetrant testing panel ndt

Model Number:PSM-5

Place of Origin:China

Brand Name:HUATEC

...the operating process. At the same time, the test block has a rough surface in the sandblasting area, which is used to verify the cleaning performance of the penetrant and the accuracy of the cleaning method. Its sensitivity is determined by the number of

Model Number:Reference Block Type 2

Brand Name:TESTECH

Place of Origin:CHINA

...; (2.5 mm) stainless steel plate. Half of the test surface is hard coated with a 0.0024" (60 µm) hard alloy material. Five crack centers are evenly spaced in the hard coated strip. The crack centers are made up of circular patterns forming a star.

Brand Name:HUATEC

Model Number:Type II

Place of Origin:Beijing

...; (2.5 mm) stainless steel plate. Half of the test surface is hard coated with a 0.0024" (60 µm) hard alloy material. Five crack centers are evenly spaced in the hard coated strip. The crack centers are made up of circular patterns forming a star.

Brand Name:TMTeck

Model Number:Precision Star TAM Panel

Place of Origin:China

Penetrant testing test specimen Model:TM-B3 All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise ...

Brand Name:UNICOMP

Model Number:UNH225

Place of Origin:China

...NDT X-RAY Testing Equipment( DR) Product Description: The Type UNH X-ray Intelligent Inspection System, independently developed by UNICOMP, is a dedicated solution for tube panel weld inspection. It is primarily applied to defect detection in small-diameter tube panel welds, capable of identifying: porosity, cracks, slag inclusions, lack of fusion, and incomplete penetration...

Brand Name:HCYZ

Model Number:M-Z3 white-orange

...panel: PP plastic, Sponge: Shaping sponge Chassis: Independently developed aluminum alloy chassis (can be locked in situ,Tilting back) Air rod: Korean Wias air rod, three stage air rod, Foot: aluminum alloy die casting five star foot, static pressure test above 1500KG, higher than BIFMA test...