environmental testing calibration device

Brand Name:LIYI

Place of Origin:China

... type, skin type, plastic, rubber, cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter,

Brand Name:HeJin

Model Number:SH-7

Place of Origin:China

... B.1 Calibration device. Standard description: The spring hammer to be calibrated is put in the release base and is then operated three times by means of the release device; it shall not be released manually. For each operation, the striking element of the

Brand Name:Sinuo

Model Number:SN2208

Place of Origin:China

... to the standard requirements of IEC60068-2-75:1997 Annex B, IEC60068-2-63:1997 Annex A, and etc. The device is used to detect the impact energy of the Spiring Hammer Tester. When the spring hammer is released, it impacts on the pendulum rod on the

Brand Name:HongCe

Model Number:SH-08

Place of Origin:China

... Device for Spring operated impact hammers Its design and manufactured according to the test requirements of IEC 60068-2-63 Annex A, IEC 60068-2-75 Annex B. Feature: Comply with the requirement of standard IEC60068-2-63 and ...

Brand Name:HAIDA

Model Number:HD-E702-800

Place of Origin:Guangdong, China (Mainland)

...Environmental Test Chamber 800L With Tempered Glass Observation Window​ Description Capacity 100L 500L 750L Temperature Humidity Test Climate Chamber Cosmetic Industries to perform temperature & humidity test, cold resistance test, thermal cycle test, ultra low temperature test, high temperature test, storage condition, and calibration function.Suitable for small test...

Brand Name:LIB

Model Number:TH-50B

Place of Origin:China

...Test Chamber For Auto Testing Calibration 40℃ Cold Hot Temperature Humidity Small Benchtop Test Chamber For Auto Testing Calibration used for Automobile Industry, Aircraft Industry, Electronics, Materials, Laboratory Calibration, University Research. 40℃ Cold Hot Temperature Humidity Small Benchtop Test Chamber For Auto Testing Calibration...

Brand Name:GENY

Model Number:YC-1891G

Place of Origin:China

...Calibration Device for Single-Phase Meters Stationary Meter Test System Single-phase intelligent energy meter calibration device is a split/integral all-electric crimp type intelligent energy meter calibration device designed according to the requirements of relevant national standards and regulations. At the same time, it provides a perfect solution for the testing...

Brand Name:SKYLINE

Model Number:SL-IM800

Place of Origin:Dongguan, Guangdong

..., shelf stacking, motor sliding, vehicle loading/unloading, and product transportation. This equipment serves as a standard testing device for inclined impact tests in research institutions, colleges, universities, packaging technology testing centers,

Brand Name:GSKA

Model Number:Universal Tensile Testing Machine

Place of Origin:Dongguan China

...Testing Machine Calibration Device Product information: The Calibration device for spring hammer is designed and manufactured according to the standard requirements of IEC60068-2-75 and GB2423.55, it is used for the calibration of the spring hammer testers between 0 and 2 J. Because it is difficult to measure directly for the offered energy of the calibrated spring hammer, the calibration principle of this device

Brand Name:LONROY

Place of Origin:Guangdong, China

...Calibration Equipment Steel Tape Measure Calibration Device Conventional Measuring Tools Calibrator Product Description Product Introduction The steel tape measure calibration device is designed and developed in accordance with the new JJG4-2015 "Steel Tape Measure Calibration Regulations". This calibration device can be used to calibrate steel tape measures. It can be used to calibrate...

Brand Name:Haida

Model Number:6014-HD

Place of Origin:China

...combustion test equipment. Calibration Procedure Position the copper block 10±1mm above the needle flame burner. Ignite the flame; the time for the copper block temperature to ...

Brand Name:PEGO Electronics

Model Number:PG-SHCC

Place of Origin:China

...75 Annex B.3 and figure B.5 for checking the impact energy accuracy of spring hammer calibration device. The calibation is made with an impact energy of 1J, which is achieved with a height of fall of 408±1mm, with a calibation striking element of 250g. 2.

Brand Name:cartesykj

Place of Origin:China

... calibration system designed to verify the accuracy and performance of various types of brake testing equipment, including roller, plate, and deceleration (road) brake testers. By simulating known braking forces and loads, it ensures that the sensors,

Brand Name:KINGPO

Model Number:PRM61XXXTA/B

Place of Origin:DONGGUAN

... targeting Electrostatic target calibration device is used for calibration of electrostatic discharge generator equipment. The target is mounted on the wall of the shielding room (Faraday cage) on a metal panel of 1.2 m*1.4m area. Test voltage: KV 0-32 ...

Brand Name:Infinity Machine

Model Number:IE10A2-1200L

Place of Origin:Made In China

...Environmental Test Chamber with Safety Protection DeviceProduct Description: The Environmental Test Chamber is a sophisticated piece of Environment Test Equipment designed to rigorously assess the resilience of products, parts, and materials in extreme conditions. This chamber is particularly suitable for conducting High And Low Temperature Test Chamber evaluations, as well as climate tests...

Brand Name:GDZX

Model Number:ZXQF-150

Place of Origin:China

...Calibration Device Product introduction The ZXQF-150 temperature calibration device is easy to carry, convenient to use, and easy to quickly and reliably calibrate temperature. It is widely used in industries such as machinery, chemicals, food, and pharmaceuticals. At present, the existing on-site dry calibration...

Brand Name:High and low temperature chamber

Model Number:B-TH-120

Place of Origin:China

..., including high and low temperature testing, electrical testing, and environmental testing. They feature a temperature accuracy of ±0.5°C, safety features such as over-temperature protection, over-pressure protection, and over-humidity protection, and

Brand Name:MENTEK

Model Number:MDP-150-CA

Place of Origin:China

... manufacturers can design, develop and produce high reliable quality parts that meet the demands of today’s technologies.All types of electronic and non-electronic devices need to be temperature stressed and

Brand Name:LIYI

Model Number:LY-HQ150

Place of Origin:China

..., cloth, Equiped with a special ventilation regulator for maintain the fresh air inside when heating. This testing machine design with sophisticated air-displacement adjustment device and a digital voltage meter, current meter, watt-hours, the timer can