direct flame impingement test

Brand Name:AI

Model Number:DFI

Place of Origin:China Mainland

...test for ignitability of products by direct flame impingement.The accuracy of the Ignitability tester meets the requirements of relevant standards and meets the control requirements for the accuracy of measurement. Standards: BS 476-12:Fire tests on building materials and structures - Part 12: Method of test for ignitability of products by direct

Brand Name:Delta

Model Number:BS476-7

Place of Origin:China

...the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS476-7 Direct Flame Impingement Building Material Flammability Tester is mainly used for the determination of the extension of

Brand Name:DAXIAN

Model Number:DX8342

Place of Origin:China

ISO 11925-2 Single-flame Source Test Apparatus Application: It is mainly applicable to test methods to determine whether building materials have flammability under specified conditions. Standard: GB/ T 8626-2007 GB/ T 10801.2-2002 EN ISO 11925-2 DIN 4102 ...

Brand Name:Sinuo

Model Number:SN773A

Place of Origin:China

...Flame Flammability Test Chamber PLC Control Test principle: Needle flame tester is a needle burner with a specified size (φ 0.9mm), with specific gas (butane), with 45° Angle timing and directional burning test, depending on whether the test is ignited and holding the combustion time and combustion length to assess the fire risk of small flame...

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

...Flame Tester Testing Machine Wire And Cable Burning Resistance Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame...

Brand Name:GOLD

Model Number:GD-ISO 11925-2

Place of Origin:China

...core principle of Kleinbrenner in Germany. It uses standard flames to conduct vertical direct combustion tests on samples to accurately evaluate the combustion characteristics of building materials. The equipment fully covers the detection requirements of

Brand Name:YUYANG

Model Number:YYF059

Place of Origin:China

...Flame Tester Testing Machine Wire And Cable Burning Resistance Requirements: Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts. The needle flame test simulates the internal part of the product. A small flame...

Brand Name:HAIDA

Model Number:HD

Place of Origin:Guangdong, China (Mainland)

...Flame Height Surgical Face Mask Flame Retardant Testing Equipment 1. Products Description: Mask Flame Retardant Testing Equipment is mainly used to test the burning performance of medical masks after contacting the flame at a certain linear speed. It is a special test instrument for the flame retardant performance of medical masks. 2. Purpose: --- Testing...

Brand Name:SKYLINE

Model Number:SL-FL15

Place of Origin:China

... impacted the vertical specimen to determine the combustibility of the building products. The flammability test furnace for building materials is based on the principle of Kleinbrenner (Klein Brenner), which is directly impacted by a vertical flame.

Brand Name:Gaoxin

Model Number:GX-7006

Place of Origin:China

... Weight 135kg Volume 86×43×80cm Test standard EN 397 and ANSI Z89.1-2014 2. Equipment Description: The tester is used to measuring the flame retardant property of helmet. Test method: The test will be processed in the fuming cupboard. The helmet after

Brand Name:HeJin

Model Number:NF-2

Place of Origin:China

...NF-2 needle flame tester is built to check how well your electronic products, plastics, and insulation resist fire. It imitates a small flame from a malfunction and lets you set flame height, burn time, and angle. This helps you see how your products might

Brand Name:Sinuo

Model Number:SN7713A

Place of Origin:China

... and IEC60950-1:2013 clause 4.6.2, Annex A.3. Equipment Structure The Hot Flaming Oil Test Device is a specialized fire safety testing system designed to evaluate the flammability and fire protection performance of electrical and electronic equipment. It

Brand Name:HongCe

Model Number:NF-2

Place of Origin:China

...Flame IEC Test Equipment IEC60695-11-5 Flammability Tester Product information: HongTong upgrades the previous needle flame tester to b e PLC control version one, the new PLC 7 inch automated needle flame test apparatus is much more humanized, and the operation is much easier. This tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. Test

Place of Origin:China

Brand Name:CHENGFENG

... Spread Tester uses gas-fired radiant panels to test the flammability of building surface materials (ASTM E162) and foams (ASTM D3675). The Flame Spread Index (IS), which is determined by factors such as flame spread and heat dissipation. It is used as a

Brand Name:TST

Model Number:JCK-3

Place of Origin:Shanghai

... material has flammability under the specified conditions and is developed according to the technical parameters specified by the national standard GB8626. The test furnace is in a normal combustion environment, with a small flame direct impact on the

Brand Name:HOOHA

Model Number:FTech-NFPA701-1

Place of Origin:DONGGUAN

... based on NFPA 701.Which regulations fabrics and films flame propagation test method for fabrics, and apply to curtains and drapes, curtains, or other shelter materials windows, awning, tent, waterproof cloth and fabric structure ...

Brand Name:PEGO

Model Number:PG-HVR

Place of Origin:China

...Flame Electrical Testing Machine According to IEC60695-11-4 / 3 1. Introduction Horizontal and vertical flame test apparatus is applied to simulate the fire at the early stage surround the electric and electronics appliance, and then evaluate the degree of fire hazard. It is designed according to UL94, IEC60695-11-4 and IEC60695-11-3. The fire hazard is evaluated by burning rate, after glow time, after flame

Brand Name:Hust Tony Instruments

Model Number:HTB-007

Place of Origin:China

...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:ZL

Model Number:ZL-3028

Place of Origin:China

... and precision testing, it performs horizontal and vertical flammability tests with simple, safe operation. Compliance Standards Manufactured according to UL94 and GBT2408 standards for flammability testing of plastic materials used in equipment and