dc 6ghz female dummy load

Brand Name:Vinncom

Model Number:VN-LD-6G-5W-ONf-R

Place of Origin:China

DC-6GHz 5W Dummy Load /Termination Load Good VSWR DC-6000MHz ROHS Compliance VN-LD-6G-5W-ONf-R.pdf Part Number VN-LD-6G-5W-ONf-R Operating Frequency ( MHz ) DC-6000 Impedance ( Ohm ) 50 VSWR ≤1.25 Application Indoor Operating Temperature ( ℃ ) -40 ~ + 80 Interface N Female...

Brand Name:Vinncom

Model Number:VN-LD-4G-30W-OPF

Place of Origin:CHINA

...Female 3.8GHz 4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy

Brand Name:ZSX

Model Number:SMP/SMA-KK

Place of Origin:China

50 Ohm RF Adapter DC-6GHz Female To Female Coax Adapter SMP To SMA SMP Female to SMA Female RF Adapter RF Adapters are passive components used in signal transmission systems for Radio Frequency applications (typically 3 kHz to 300 ...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-4000 VSWR ≤...

Brand Name:ZD

Model Number:ZD-DL-6Ghz-1W-NM

Place of Origin:China

DC-6GHZ 1W N Male Connector Coaxial RF Dummy Load With 50ohm 1W RF Dummy Load (N, DC-6GHz) are used in a wide variety of measurement systems; any port of a multi-port microwave device that is not involved in the measurement should be terminated in its ...

Model Number:ZCT-100SN-6T

Place of Origin:Chengdu,China

Brand Name:Zysen

100W DC-6GHz N type Coaxial Termination ​DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2....

Brand Name:DALEE

Model Number:DL50011209

Place of Origin:Guangdong,China(Mainland)

...dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC~3GHz). 1.5 MAX.(3~6GHz...

Brand Name:YLT

Model Number:Terminations

Place of Origin:China

Coaxial Fixed Terminations Series 50Ω 50w Connector N DC-6 Max VSWR1.25 64×109mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave ...

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

50kW 650V-1000V,DC Portable Variable Resistive Dummy Load Banks Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating ...

Brand Name:ELT

Model Number:SMP-KR8-0.5W

Place of Origin:Shaanxi, China

...Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50Ω, including SMA, SSMA, SMP, SSMP, CSMP, N, TNC, K2.92mm and other male and female...

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Brand Name:RY

Model Number:RY-051101

Place of Origin:China

...DC-6GHz SMA Male to SMA Female Coaxial RF Attenuator, 1/2/3/5/6/10/15/30db Attenuator, SMA Fixed Connectors Gold Plated Attenuator Temperature Range -55~+155°C (PE Cable -40~+85°C) Impedance 50Ω Vibration 100m/S2 (10~500Hz), 10g Frequency Range DC-11GHz Insertion Loss ≤ 0.24dB/6GHz...

Brand Name:Sinrui

Model Number:N-KKK

Place of Origin:China

Products Name: Nickel plated RF DC 6GHz N type female to N female to N female adapter 50 Ohm Products Descrption: N connectors have a threaded coupling interface to ensure that it mates correctly. It is available in either 50Ω or 75Ω ...

Place of Origin:Hebei,China

Brand Name:Triumph Load

Model Number:48V 200A battery test dummy load bank

Introduction 48V 200A battery test dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in ...

Brand Name:Mstar/OEM

Place of Origin:China

Key attributes Industry-specific attributes Brand Name Mstar Other attributes Model Number MJC-410JJ-1-12S-160 Type customization Place of Origin Guangzhou, China Number of Conductors 1 Brand name Mstar Frequency DC-6GHz Nominal Impedance-Ω 50 Connector ...

Brand Name:Terui

Model Number:N-50JR-10-6 Datesheet

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...

Brand Name:LEADSIGN

Model Number:HSD Cable Assembly

Place of Origin:CHINA

HSD Female To Female Code Z High Speed Data Automobile Cable Assembly Product description: HSD connectors provide connectivity solutions for automotive infotainment modules, cameras, consumer device ports, and display devices. Focusing on various ...

Model Number:SMA-J-LT

Place of Origin:Guangdong, China

Brand Name:Original

#detail_decorate_root .magic-0{border-bottom-style:none;border-bottom-color:113c6f;font-family:Verdana;font-size:24px;color:#fff;background-color:#113c6f;text-align:center;text-decoration:underline;font-style:normal;font-weight:bold;border-bottom-width:2px...

Brand Name:HICORPWELL

Model Number:SMA-K Calibrator

Place of Origin:China

... load ＜-32dB(Return Loss) Material Gold-plated brass Connecting Interface SMA Torque value 0.9 N/m The idea is to create correction ...