dc 6ghz dummy load

Brand Name:ZENITHSUN

Model Number:DRLB

Place of Origin:China

610A,DC Variable Resistive Dummy Battery Load Banks With Control Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power ...

Brand Name:YLT

Model Number:Terminations

Place of Origin:China

Coaxial Fixed Terminations Series 50Ω 1000w Connector 7/16 DC-3 Max VSWR1.3 400×410×147mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ...

Brand Name:Terui

Model Number:N-50JR-10-6 Datesheet

Place of Origin:China

RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ...

Brand Name:ZD

Model Number:ZD-DL-6Ghz-1W-NM

Place of Origin:China

DC-6GHZ 1W N Male Connector Coaxial RF Dummy Load With 50ohm 1W RF Dummy Load (N, DC-6GHz) are used in a wide variety of measurement systems; any port of a multi-port microwave device that is not involved in the measurement should be terminated in its ...

Model Number:ZCT-100SN-6T

Place of Origin:Chengdu,China

Brand Name:Zysen

100W DC-6GHz N type Coaxial Termination ​DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power ...

Model Number:SMA-M-1W

Brand Name:ZSX

Place of Origin:China

... range of DC~6GHz, is a high-precision passive matching device designed for RF microwave systems. It mainly absorbs RF energy at the port, suppresses signal ...

Brand Name:Vinncom

Model Number:VN-DL-4G-100W-ODF

Place of Origin:CHINA

...DC-3.8GHz DC-4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load...

Brand Name:DALEE

Model Number:DL50011209

Place of Origin:Guangdong,China(Mainland)

...dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50 ohm Applicable Frequency: DC~6 GHz Vspr: 1.3 MAX.(DC~3GHz). 1.5 MAX.(3~6GHz...

Categories:RF Termination Load

Country/Region:china

FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications Frequency Range(MHz) DC-6000 VSWR ≤...

Brand Name:LENOLINK

Model Number:LD10-DIN

Place of Origin:CHINA

... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc.

Brand Name:ELT

Model Number:SMP-KR8-0.5W

Place of Origin:Shaanxi, China

... Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed...

Brand Name:RY

Model Number:RY-051101

Place of Origin:China

...DC-6GHz SMA Male to SMA Female Coaxial RF Attenuator, 1/2/3/5/6/10/15/30db Attenuator, SMA Fixed Connectors Gold Plated Attenuator Temperature Range -55~+155°C (PE Cable -40~+85°C) Impedance 50Ω Vibration 100m/S2 (10~500Hz), 10g Frequency Range DC-11GHz Insertion Loss ≤ 0.24dB/6GHz...

Brand Name:QingZhu

Model Number:RIG8B-60

Place of Origin:Xian,China

RIG8B 150W 5K1 J high-voltage resistor spot glass glaze thick film resistor variable frequency dummy load resistor RIG8B is designed for use in high-power applications. wide ohmic range, precise tolerance and temperature coefficient values as well as ...

Brand Name:TX

Model Number:TX-c-cable

Place of Origin:China

...kindly know that the length, connector and color can be customized. Material: Metal + RG174 Cable Color: Black + Gold Frequency: DC-6Ghz Impedance: 50 Ohms VSWR: ≤1.5 Connector: SMA Male To MCX Connector Length: 1000mm Total Operation Temperature: -40 ...

Place of Origin:changzhou

Brand Name:XINLIANFENGYUAN

Model Number:AC-190

F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ...

Brand Name:WS

Model Number:WS-GAH-Res-20W

Place of Origin:Shenzhen of China

20W 0.1 ohm - 2K ohm Gold Aluminum Housed​ Dummy Load Wirewound Power Resistor We also can make uncommon product per customers requirements. Features: 1, Resistance range: 0.01 ohm - 2K ohm 2, ...

Model Number:ZSDU6000/18000-SS

Place of Origin:Chengdu,China

Brand Name:Zysen

DC-6 & 7-18GHz Duplexer Zysen offers Duplexer/Diplexer/Triplexer for wireless, satellite & broadcast applications. For 5G, LTE, W-CDMA (UMTS), GSM erc. Below is some sample we made. Customized frequency and optimized specifications available. Fast delivery time with competitive price. Contact us with your requirement. Electrical Specifications RX TX Frequency Range DC– 6GHz...

Place of Origin:Guangdong, China

... Stranded Model Number Sma Female to Sma Male Brand Name LANYI Place of Origin Guangdong, China Apply frequency DC-6GHz Connector Type1 ufl/SMA/SMB/SMC/MCX, MMCX, N type, F type/TNC/BNC

Brand Name:Sinrui

Model Number:N/MCX-JJ

Place of Origin:China

Products Name: Nickel plated RF DC 6GHz N type Male to MCX male adapter 50 Ohm Products Descrption: N connectors have a threaded coupling interface to ensure that it mates correctly. It is available in either 50Ω or 75Ω versions. These two versions have ...