copper sfp 10g t x

Brand Name:HILINK

Model Number:HL-10G-T

Place of Origin:Guangdong, China

...MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP's TX_DISABLE pin, PHY IC be reset. Product Features:

Place of Origin:CN

Brand Name:OEM

Model Number:YT-10GSFP-1M

10G SFP+ Copper Twinax cable, passive Features SFP+ Copper Twinax cables are suitable for very short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. SFP+ cables offers a low cost SFP+ solution. SFP+ ...

Brand Name:Mray

Model Number:SFP-10G-T

Place of Origin:Shenzhen, China

10G SFP RJ45 Module Copper Media Converter Optical Fiber For Brand Network Switch Huawei Mikrotik Ubiqui Cisco Dell Description Miray’s 10G-SFP-T is Multi-Vendor MSA Compatible 10G Copper SFP+ ( Small Form-factor Pluggable Enhanced) Transceiver, operating over twisted pair Category 5e or better cable with maximum distance up to 30m. 10G-SFP-T operates in Standard 0° to 70°C temperature range and has RJ45 Standard connector. 10G Copper SFP...

Place of Origin:Hubei, China

Brand Name:YXFiber

Model Number:YXF-CP3-RJ45

Copper SFP 10G 30m RJ45 Connector 1. PRODUCT DESCRIPTION SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP...

Place of Origin:Shenzhen,China

Brand Name:Neuter, OEM

Model Number:CAB-SFP-SFP-7M-A

Copper SFP + Direct Attach Cable For Fiber Channel / Storage Servers Specifications: Part Number Product Description AWG 10G SFP+ twinax copper cable CAB-SFP-SFP-0.5M 10G SFP+ Copper Twinax cable 0.5 Meter, passive 30 CAB-SFP-SFP-1M 10G SFP+ Copper Twinax cable 1 Meter, passive 30 CAB-SFP-SFP-2M 10G SFP+ Copper Twinax cable 2 Meters, passive 30 CAB-SFP-SFP-3M 10G SFP+ Copper Twinax cable 3 Meters, passive 30 CAB-SFP-SFP-5M 10G SFP+ Copper...

Brand Name:UTOPTEK

Model Number:SFP-10G-T

Place of Origin:China

SFP-10G-T 10G BASE-T Copper RJ45 SFP Transceiver 30M Brand UTOPTEK, OEM Condition 100% New Form Factor SFP UTP cable Cat5,Cat6 Distance 30M Data Rate (max) 10G/5G/2.5G/1Gbps Working Temperature (°C) 0°C~70°C Storage Temperature (°C) -40°C~+85°C Relative Humidity 0~85% Voltage Supply 3.3--5v Connector RJ-45 Warranty1 years Compatible with Cisco, Huawei, HP etc. Time of delivery 1-2 working days Package 10 pcs/box Description: SFP-10G-T Copper

Brand Name:Huawei

Model Number:SFP-10G-CU5M

Place of Origin:China

...SFP - 10G - CU5M Compatible 10G SFP+ 5m Passive Direct Attach Copper Twinax Cable HW SFP-10G-CU5M Compatible 10G SFP+ 5m Passive Direct Attach Copper Twinax Cable Optcore’s SFP-10G-DAC-P5M-HW is a high performance and cost-effective SFP+ direct attach copper cable (also known as Twinax Cable or DAC) supporting the bandwidth transmission requirements as defined by 10 Gigabit-Ethernet (10GBase-CU), 8G Fiber Channel (FC) and 10G...

Brand Name:NuFiber

Model Number:SFP-10G-T

Place of Origin:China

...SFP-10G-T 10G Copper Ethernet SFP+ Transceiver 30 meters Compatible Cisco Description SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP's RX_LOS pin for link indication. If pull up SFP...

Brand Name:Aixton

Model Number:AXT-DAC

Place of Origin:CHINA

...10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The ...

Brand Name:Linkopto , or OEM

Model Number:SFP-10GT-R

Place of Origin:China

...SFP 10G Copper SFP+ Copper-T SFP+ RJ45 30M Compatible with HP CISCO The Linkopto 10G Copper SFP transceivers IS high performance, cost effective module compliant with the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 30 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP...

Brand Name:Coloroptic

Place of Origin:China

...h the 10G Ethernet and 10GBASE-T standards as specified in IEEE 802.3az, which supporting 10Gbps data- rate up to 80 meters reach over unshielded twisted-pair category 6a/7 cables. The module provides standard serial ID information compliant with SFP+ MSA,

Brand Name:Olycom

Model Number:OMT10GA-30M

Place of Origin:Guangdong, China

...10G copper SFP Copper SFP+ Transceiver RJ45 30m Key Features of SFP+ Transceiver Up to 10Gb/s bi-directional data links Hot-pluggable SFP+ footprint Fully metallic enclosure for low EMI Low power dissipation Compact RJ-45 connector assembly Access to physical layer IC via 2-wire serial bus Supports Links up to 30m using Cat 6a/7 Cable RoHS Compliant Operating case temperature: 0℃ to 70℃ Introduction of 10G Copper SFP

Brand Name:cisco

Model Number:SFP 10G T

Place of Origin:USA

... over standard Cat6a/Cat7 twisted pair copper cabling. Supporting a maximum reach of 30 meters, it enables 10GBASE-T connectivity through RJ45 interfaces, offering a cost-effective and flexible ...

Brand Name:SPACECOM or OEM

Model Number:SFP-10G-T

Place of Origin:China

10G Copper SFP+ Transceiver Module SFP -10G-T RJ45 connector Huawei Compatible Description SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP...

Brand Name:Generic

Model Number:SFP-10G-T-X

Place of Origin:Shenzhen, China

... 10GBASE-T Copper transceiver module provides 10GBase-T throughput up to 30m over cat6a/cat7 copper cable via RJ-45 connector. The SFP-10G-T-X is fully compliant with the Multi-Source Agreement (MSA) and 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T

Brand Name:KCO, Kocent Optec Limited

Model Number:Passive SFP + cable

Place of Origin:Guangdong, China

...Copper SFP+ to SFP+ Passive Cable 30 AWG 10G Cisco HP H3C Compatible Quick detail: Name SFP + turn SFP + passive high-speed cable (3m, PCCA, SFP + to SFP +, AWG30) Model CAB-10GSFP-P3M Brand KCO Product type SFP + to SFP + Speed 10 GBPS Cable type Passive Copper...

Brand Name:DOWELL

Model Number:DW-10G-AOXX

Place of Origin:China

...-to-optical conversion on the ends to behave like a standard copper cable. AOCs offer higher bandwidth, longer distances, and better signal integrity than traditional copper, commonly used in data centers, HDMI/USB, and high-performance computing.

Brand Name:Sourcelight or OEM ODM

Model Number:10G SFP+ COPPER

Place of Origin:Shenzhen,China

... over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable. This is the first SFP+ transceiver that offers 10 Gb/s communication over this type of media. Features I2C 2

Brand Name:CISCO

Model Number:SFP-10G-LR

Place of Origin:China, Singapore , Malaysia , Thailand , etc

10 km SFP-10G-LR SFP Transceiver Module , Plug in Cisco 10gb Copper SFP SFP-10G-LR Cisco SFP-10G-LR=Cisco Wan Interface Card The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber ...

Brand Name:Fibery

Model Number:SFP-10G-T

Place of Origin:China

...10G Copper SFP RJ45 Sfp Module SFP-10G-T Description SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP‘s RX_LOS pin for link indication. If pull up SFP‘s TX_DISABLE pin, PHY IC be reset. SFP...