continious nmp solvent processing system

Brand Name:TICO

Model Number:STC-NMP-C3

Place of Origin:Shenzhen

NMP Solvent Treatment System for Filtering Exhaust Gases in the Coating Process Brief Introduction It is mainly applied for the filtration treatment of the solvent in the exhaust gas generated during the drying process of the coating machine, and achieves...

Brand Name:LONGWELL

Model Number:1-Methyl-2-pyrrolidinone(NMP)

Place of Origin:China

... and semiconductor panel industries, as a solvent for mixed electrode materials, conductive agents, and adhesives, cleaning polyimide, removing photoresist, and other processes. It is an important chemical raw material with advantages such as low toxicity,

Brand Name:ACEY

Place of Origin:China

Model Number:ACEY-ST300

...Solvent Purification System Machine Product Description ACEY-ST300 It is primarily used to filter solvents from exhaust gases generated during the drying stage of the coating process, enabling effective dust removal and purification of emissions. Features * Water bath principle, recycling NMP waste gas during coating process; * Two-stage water bath treatment unit, good for NMP...

Brand Name:peony

Place of Origin:china

Model Number:PDC

...Solvent-Containing Slurry Description The Industrial Decanter Centrifuge for Solvent-Containing Slurry continuously separates suspended solids from solvent-bearing process liquids. It is suitable for chemical, pharmaceutical, battery-material, fine-chemical, and solvent-recovery processes requiring closed and controlled separation. Typical Applications NMP...

Brand Name:HUNTSMAN

Model Number:PI

Place of Origin:/

... polyimide. It is fully imidized during manufacturing, eliminating the need for high temperature processing. Matrimid 5218 / Matrimid 9725 is soluble in a variety of common solvents. Evaporation of the solvents leaves a strong, durable, tough coating.

Categories:PVDF Powder

Country/Region:china

...some polar solvents (NMP, DMF, DMAC etc.) under a certain condition of temperature and agitation. The pellet or powder can be applied in the injection process. Technical Data Sheet Properties Test Method Unit SF-906 Average Particle Size Laser Sizer μm