choke and kill manifold 4 1 16

Brand Name:Hebei Pantu

Model Number:YG21

Place of Origin:China

.... It is used to control the annular fluid discharge and well back pressure. According to the water, kill fluid and cement slurry into the annulus, to achieve the purpose of killing the well, waterproofing, and fire fighting. It is an essential part of

Brand Name:ZZ TOP OIL TOOLS

Model Number:Kill Manifold

Place of Origin:China

API 16C Kill Manifold For High Pressure Well Flow Control 4 1/16" x 5000psi Kill manifold is important control equipment during drilling well, the manifold can be used to kill the well and avoid the risk of fire. Kill manifolds are used to forcibly inject ...

Place of Origin:CHINA

...Choke and kill manifold Working Pressure3000~15000 PSI Descriptions of High quality Choke and kill manifold Working Pressure3000~15000 PSI: Working Pressure3000PSI15000PSI Nominal Bore2-1/164-1/16 The choke manifold is support equipment of hydraulic BOP for controlling well blow out and well pressure. Furnished with hydraulic control panel to achieve remote control. Through the choke valve, perform well killing...

Brand Name:RZY

Brief Introduction to Choke and Kill Manifold The choke and kill manifold is a core component of well control equipment, connected to the blowout preventer (BOP) stack. It is mainly integrated with components such as choke valves and Check valves. As a ...

Brand Name:CCSC

Model Number:4 gate valves

Place of Origin:China

API 16C Hydraulic Choke and Kill Manifold for Oilfield well control Choke manifold is a system of valves and chokes for controlling the flow from the well usually has two flow paths, one adjustable choke used primarily for cleaning the well up and ...

Brand Name:JC Wellhead

Model Number:4 1/16" x 5000 psi Choke Manifold

Place of Origin:China

..., testing operation, fracturing operation and completion service, The design and the manufacture of the choke and kill manifolds is according to API16C specification. During drilling operation, the choke manifold and kill manifold is used to carry out

Model Number:2 1/16"- 4 1/16"

Place of Origin:China

2000psi -15000psi 2 1/16 "~4 1/16" API 16C Kill And Choke Manifold For Oil Well Control 2000psi -15000psi 2 1/16 "~4 1/16" API 16C Kill And Choke Manifold For Oil Well Control Choke Manifold The Choke Manifold consists of choke valves, gate valves, line ...

Brand Name:HUIFENG

Place of Origin:CHINA

1 13/16”~ 5 1/8" Choke Valve Manual / Hydraulic / Electric Parameters of the product The throttle valve controls flow by adjusting the gap between the alloy valve core and the valve seat.Choke and kill manifolds are important equipment for preventing ...

Brand Name:AHSUNVAL

Model Number:Fig. D601

Place of Origin:CHINA

Hose End With Latch, Camlock Hose Fittings, Material is Aluminum or Stainless Steel 1, PRODUCT DESCRIPTION: Size: DN40-DN50 Material: Aluminum/Stainless steel Working Pressure:16bar/230psi 2, Application: 1. Oil and Gas pipelines, 2. Cementing, fracturing,...