cable circumferential rotation testing machine

Brand Name:Daxian

Model Number:DX8309

Place of Origin:China

... type and non-threaded terminal fixed connection components to test whether they can withstand the mechanical stress that occurs during normal use. Conform to the standard: GB2099.1-96, GB16915.1-97 and IEC884-1 in the corresponding clauses and other

Brand Name:Infinity Machine

Model Number:C5092

Place of Origin:Made In China

...Cable 90° Bending Testing Cable Flex Cycle Test Machine Model:C5092 Purpose: Cable bending test machine is suitable for the bending testing of the multi-wires cable, communication cable, earphone cable etc. The testing method is short -circuit connecting one end cable and fix this end on the rotation plate, and put the weight on the cable then to do the left and right rotation, to check the cable if conducting after some rotation

Brand Name:ZL

Model Number:ZL-1027

Place of Origin:China

... at the cable, then to swing the jig right and leftwith the setting angle. after rotating to required cycles then stop to check the cable; or check the rotation cycles after cable broken while the cable is tested by connecting to the electricity. While the

Brand Name:YUYANG

Model Number:YYW-002

Place of Origin:China

.... This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90°. The plug sockets are designed to make this rotation easy and accurate. This tester has

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-F731

...the chair. The Usaeg 1. Office Chair Rotating Testing Machine is a two station testing equipment. 2. According to test Standard: BIFMA X5.1-2002, Test No. 8,11 3. Applicability: This office chair test applies to all types of chairs. 4. Purpose of Test: to

Brand Name:KingPo

Model Number:HD-6159E

Place of Origin:China

...Rotation Testing Machine Simulating under Certain Load Conditions Description: HD-6159E instrument is suitable for testing the service life of wires and planes with a certain degree of taper rotation, and simulating the service life of the tested products under certain load and load conditions. The instrument has built-in low-voltage and high-current load, which can be externally connected with a momentary break test

Brand Name:HongCe

Model Number:HC9917

Place of Origin:China

...Cable Retention Force Testing Machine Standard with Tensile Strength Testing Machine: IEC 60884-1 'Plugs and socket-outlets for household and similar purposes – Part 1: General requirements' clause 23.2, figure 20 Application with Tensile Strength Testing Machine: It is for testing...

Brand Name:Haida

Model Number:HD-F731

Place of Origin:China

.... It apply to all kind of office chair which with swivel platform, used to evaluate the office chair to withstand repeated pressure and wear ability in rotation. It provide two mode of testing: 1. Can set the clockwise and counter--clockwise angle (

Brand Name:POOTAB, PERFECT

Model Number:PT-1136

Place of Origin:Dongguan,Guangdong,China

... Cable Tensile Strength Testing Machine is designed for Trial tests and analysis, research institutes, universities, industrial and mining enterprises, technical supervision, inspection and arbitration department of the ideal test equipment .he series of

Brand Name:PTE

Model Number:Wire And Cable Terminal Tensile Testing Machine

Place of Origin:China

..., colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.

Brand Name:JIEDONG

Model Number:JD-3004

Place of Origin:Guangdong, China

...) JD-3004 product description: Applicable to the relevant manufacturers and quality inspection departments to bend (bend) the cable test. The test method is to fix the cable on the fixture. When the test is performed, the clamp swings left and right.

Place of Origin:China

Brand Name:KeRang

...Test Machine HDX1307 Standard:IEC60811-1-4 clause 8.1 and 8.2, common test methods for insulating and sheathing materials of electric and optical cables-part 1-4:Methods for general application-Test at low temperature. Application:This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a major axis dimension up to and including 20 mm. Test sample:Cables...

Brand Name:HOOHA

Model Number:ZY6014C

Place of Origin:China

Single Wire Cable Inclined Mechanical Testing Machine Height 610mm 1 Year Waranty Meet the standard: Conforming to GB12666.4 test standard. Main features: Light the burner to make the tip of the inner cone 20mm at the bottom of the sample. Contact the ...

Brand Name:SKYLINE

Place of Origin:China

... wire and cable standard for road vehicles", "TBT 1484.1-2001 railway locomotive vehicle cable - rated voltage 3KV and below cable", "DIN72551- 5/1991 Road vehicles - low-voltage cables - single-core, unshielded, thin-walled, polyvinyl chloride (PVC)

Brand Name:AI

Model Number:AOI

Place of Origin:China

Introduction: This fully automatic Oxygen Index Testing Machine measures minimum oxygen concentration as necessary when specimen combustion. The oxygen sensor is adapted Paramagnetic Type which has a precise, long life, less error rate and high reliability...

Place of Origin:China

Brand Name:GREENLIFE

Stainless steel inside plastic flexi coil lanyard tool coil cable for car testing machines Brand Name: GREENLIFE Specification: Size: Customized Color: Black, white, red, blue, green, yellow etc all solid or transparent clear all, any Pantone color ...

Brand Name:Monoluxtecs

Model Number:SR6009

Place of Origin:ShenZhen

180dB/Km Servo Optical Optical Fiber Cable OD4.0 Black Cable For Equipment Test, Machine Connector Servo System Description & Plastic optical fiber has been used in industrial control for more than 20 years, and is widely used in fieldbus, process control...

Brand Name:Herrman

Model Number:GWQ-90

Place of Origin:China

...cable repeated bending testing machine optic fiber cable repeat beading detector DESCRIPTION The equipment is used to test optical cable resistance repeated bending properties. By applying repeated bending force, for the qualified optical cable, no fiber fracture, fiber attenuation values meet standard, no optic cable jacket cracking. The equipment adopts the man-machine interface and PLC control, TFT true color screen display test

Brand Name:YUYANG

Model Number:YYW002

Place of Origin:China

...Cable Flex Test Equipment 6 Station 10~60 Times/Min Description: UL817 IEC60335 cable bending testing machine can test six cables or cord sfitted with plugs simultaneously. This improves testing capacity.IEC60884-1 calls for 10,000 flexing at a rate of 60 flexing per minute. Halfway through the test, the cords need to be rotated 90°. The plug sockets are designed to make this rotation...